CHINESE JOURNAL OF AERONAUTICS
- Index allocation for a reusable LOX/CH4 rocket engine
- Micromanufacturing technologies of compact heat exchangers for hypersonic precooled airbreathing propulsion: A review
- Acceleration of unsteady vortex lattice method via dipole panel fast multipole method
- A fatigue damage-cumulative model in peridynamics
- Carbon nanotube protected composite laminate subjected to lightning strike: Interlaminar film distribution investigation
- Numerical research on airfoil transition delay by alternative current dielectric barrier discharge actuation
- A combined technique of Kalman filter, artificial neural network and fuzzy logic for gas turbines and signal fault isolation
- Electrochemical machining of complex components of aero-engines: Developments, trends, and technological advances
- Near real-time modeling of global ionospheric vertical total electron content using hourly IGS data
- Influence of shock attenuation on tailored operation in free piston shock tunnels
- Probabilistic fault recoverability analysis of flight control process
- Effects of pressure oscillation on aerodynamic characteristics in an aero-engine combustor
- A tip clearance prediction model for multistage rotors and stators in aero-engines
- Advanced high-order nonlinear chirp scaling algorithm for high-resolution wide-swath spaceborne SAR
- Grinding force and surface quality in creep feed profile grinding of turbine blade root of nickel-based superalloy with microcrystalline alumina abrasive wheels
- Mechanical behaviour of adhesively single lap joint under buckling conditions
- Do drones have a realistic place in a pandemic fight for delivering medical supplies in healthcare systems problems?
- Recent progress of residual stress measurement methods: A review
- Design of nanofluid-cooled heat sink using topology optimization
- Numerical and experimental investigation on dynamic performance of bump foil journal bearing based on journal orbit
- An unsupervised pattern recognition methodology based on factor analysis and a genetic-DBSCAN algorithm to infer operational conditions from strain measurements in structural applications
- UAV navigation in high dynamic environments:A deep reinforcement learning approach
- Imaging of target with complicated motion using ISAR system based on IPHAF-TVA
- An intelligent target detection method of UAV swarms based on improved KM algorithm
- Actual TDoA-based augmentation system for enhancing cybersecurity in ADS-B
- Towards intelligent design optimization: Progress and challenge of design optimization theories and technologies for plastic forming
- Precipitation behavior and properties of extruded 7136 aluminum alloy under different aging treatments
- A Lamb wave quantification model for inclined cracks with experimental validation
- Pseudo-linear inertial navigation algorithm
- Improved model of ionosphere variability and study for long-term statistical characteristics
- Tensile properties of a composite–metal single-lap hybrid bonded/bolted joint
- Aerodynamic investigation of twist angle variation based on wing smarting for a flying wing
- Helicopter maritime search area planning based on a minimum bounding rectangle and K-means clustering
- Analytical method of nonlinear coupled constitutive relations for rarefied non-equilibrium flows
- Electromagnetic scattering characteristics of coaxial helicopter based on dynamic transformation method
- Disturbance observer-based backstepping control for hypersonic flight vehicles without use of measured flight path angle
- Optimal three-dimensional impact time guidance with seeker’s field-of-view constraint
- Phase plane design based fast altitude tracking control for hypersonic flight vehicle with angle of attack constraint
- Numerical simulation of broken pin effects on the flow field and cooling performance of a double-wall cooling configuration
- Unmanned aerial vehicle swarm mission reliability modeling and evaluation method oriented to systematic and networked mission
- A novel method for solving shortest tool length based on compressing 3D check surfaces relative to tool postures
- Whole-process design and experimental validation of landing gear lower drag stay with global/local linked driven optimization strategy
- Trajectory optimization of aerial slung load release for piloted helicopters
- Suppressing nonlinear aeroelastic response of laminated composite panels in supersonic airflows using a nonlinear energy sink
- Random copolymer membrane coated PBO fibers with significantly improved interfacial adhesion for PBO fibers/cyanate ester composites
- Formation flight of fixed-wing UAV swarms:A group-based hierarchical approach
- Modified robust optimal adaptive control for flight environment simulation system with heat transfer uncertainty
- Recent active thermal management technologies for the development of energy-optimized aerospace vehicles in China
- Operational modal parameter identification with colored noise excitation