2018年3期
刊物介绍
The Chinese Journal of Chemical Engineering (Bimonthly, started in 1982) is the official journal of the Chemical Industry and Engineering Society of China and published by the Chemical Industry Press. The aim of the journal is to develop the international exchange of scientific and technical information in the field of chemical engineering. It publishes original research papers that cover the major advancements and achievements in chemical engineering in China as well as some articles from overseas contributors. The topics of journal include chemical engineering, chemical technology, biochemical engineering, energy and environmental engineering and other relevant fields. Papers are published on the basis of their relevance to theoretical research, practical application or potential uses in the industry as Research Papers, Research Notes, Chemical Engineering Data and Reviews. Prominent domestic and overseas chemical experts and scholars have been invited to form an International Advisory Board and the Editorial Committee. It enjoys recognition among Chinese academia and industry as a reliable source of information of what is going on in chemical engineering research, both domestic and abroad.
Chinese Journal of Chemical Engineering
- Numerical investigation on flow and heat transfer characteristics of corrugated tubes with non-uniform corrugation in turbulent flow
- Investigations on pool boiling critical heat flux,transient characteristics and bonding strength of heater wire with aqua based reduced graphene oxide nano fluids
- Heavy metals adsorption by banana peels micro-powder:Equilibrium modeling by non-linear models
- Potential aspect of rice husk biomass in Australia for nanocrystalline cellulose production
- Fouling evaluation on membrane distillation used for reducing solvent in polyphenol rich propolis extract
- Investigation on a vertical radial flow adsorber designed by a novel parallel connection method☆
- Synthesis,adsorption and selectivity of inverse emulsion Cd(II)imprinted polymers☆
- Partial pore blockage and polymer chain rigidification phenomena in PEO/ZIF-8 mixed matrix membranes synthesized by in situ polymerization☆
- Effect of boron addition on the MoO3/CeO2–Al2O3 catalyst in the sulfur-resistant methanation☆
- Free radical reaction model for n-pentane pyrolysis
- Benzene selective hydrogenation over supported Ni(nano-)particles catalysts:Catalytic and kinetics studies
- Indirect photocatalytic reduction of arsenate to arsenite in aqueous solution with TiO2 in the presence of hole scavengers
- Pd catalysts supported on rGO-TiO2 composites for direct synthesis of H2O2:Modification of Pd2+/Pd0 ratio and hydrophilic property☆
- Preparation of highly active MCM-41 supported Ni2P catalysts and its dibenzothiophene HDS performance☆
- Dealumination kinetics of composite ZSM-5/mordenite zeolite during steam treatment:An in-situ DRIFTS study☆
- An improved theoretical procedure for the pore-size analysis of activated carbon by gas adsorption☆
- Isobaric vapor–liquid equilibrium for ternary system of ethanol,ethyl propionate and para-xylene at 101.3 kPa☆
- Interaction of antipsychotic drug with novel surfactants:Micellization and binding studies
- Effect of endogenous hydrogen utilization on improved methane production in an integrated microbial electrolysis cell and anaerobic digestion:Employing catalyzed stainless steel mesh cathode☆
- Indirect mineral carbonation of titanium-bearing blast furnace slag coupled with recovery of TiO2 and Al2O3☆
- Oxidative desulfurization of dibenzothiophene over Fe promoted Co–Mo/Al2O3 and Ni–Mo/Al2O3 catalysts using hydrogen peroxide and formic acid as oxidants
- Ozonation of o-phenylenediamine in the presence of hydrogen peroxide by high-gravity technology☆
- Adsorptive potential of Acacia nilotica based adsorbent for chromium(VI)from an aqueous phase
- Variation of toxic pollutants emission during a feeding cycle from an updraft fixed bed gasifier for disposing rural solid waste☆
- Effect of heat flux and inlet temperature on the fouling characteristics of nanoparticles☆
- Parametric study and effect of calcination and carbonation conditions on the CO2 capture performance of lithium orthosilicate sorbent
- Effects of nitrogen doping on surface-enhanced Raman scattering(SERS)performance of bicrystalline TiO2 nano fibres☆
- The combined effects of lysozyme and ascorbic acid on microstructure and properties of zein-based films☆
- Fabrication of chitosan microspheres for efficient adsorption of methyl orange☆
- Synthesis of butter fly-like BiVO4/RGO nanocomposites and their photocatalytic activities☆