2019年2期
中国炼油与石油化工
- Intelligent Transformation and Upgrading of Oil Refining& Petrochemical Industries in China: Investigation &Application
- Research Progress in Refining Process for Production of Caprolactam by Beckman Rearrangement Reaction
- Synthesis of Nanosized SSZ-13 Zeolite and Performance of Its Mixed Matrix Membrane for CO2/CH4 Separation
- Research on Hydrogenolysis of Glycerol to 1, 2-Propylene Glycol by Using Supported Raney-Cu/Al2O3
- Effect of the Morphology of ZnO Support on the Desulfurization and Regeneration Performance of Ni/ZnO Catalyst
- Methane Storage and Synthesis of HKUST-1 Prepared with Different Solvent
- Novel BiVO4@C3N4@GO Composites with Higher Photocatalytic Performance
- Clean Production of Ethyl Benzene Using Catalyst for Benzene Alkylation Achieved by SRIPT
- Synthesis of MOR/SAPO-11 Composite Molecular Sieve via Seed Crystallization for n-Alkane Hydroisomerization
- Two Technologies for Hydrogenation and Upgrading of Coal-Based Crude Liquid Developed by SINOPEC's Research Institute of Petroleum Processing Passed Technical Appraisal
- Evaluation of Inocula and Packing Material for Acceleration of Start-Up in Biofilters
- Research and Application of Image Recognition Technology in Microscopy Diagnosis of Catalytic Cracking Catalysts
- Technology for Manufacture of MMA from Ethylene and Syngas Explores A New Route in Coal Chemistry
- Study on Flue Gas Desulfurization Process with Selective SO2 Removal by N-formylmorpholine
- Progress in Research on Manufacture of Aromatics via Hydrogenation of CO2 at Dalian Institute of Chemical Physics
- Enhanced Anti-Wear Property of Low Viscosity Engine Oil for Sequence IVB Engine Test Meeting the GF-6 Specification
- Biodegradability and Tribological Properties of Mineral Base Oil Enhanced by Caprylic Methyl Diethanolamine Phosphate Ester
- Numerical Simulation of Optimization of Mixing Tank for Residue Upgrading Reactor
- Technology for Manufacture of Xylene from Toluene and Methanol with Coproduction of Low-Carbon Olefins Passed Appraisal
- Optimization of Dividing Wall Column with Heat Transfer Process Across the Wall for Feed Properties Variation