2017 年《合成树脂及塑料》第 34 卷第 1～6 期总目次

2017 年《合成树脂及塑料》第 34 卷第 1～6 期总目次

研究与开发

一种亚胺羧酸型螯合树脂的合成 ································································································ 程云雷，曹有名（1-1）

酶解木质素阻燃剂的制备及其对TPO阻燃性能的影响 ················ 王栖桐，冯 钠，刘 俐，王志超，曲敏杰，张 红，温艳慧（1-6）

基于煤矸石构筑环境友好型阻燃EVA的性能研究 ······························································· 钱 翌，李少权，武 洋（1-11）

水性混凝土脱模剂用硅油的改性及其乳化性能 ············································ 孙义明，马腾飞，李鹏程，姜仡鹏，梁 爽（1-16）

表层含氨基PBA-P（MMA-VAm）核壳乳胶粒子的制备 ························································· 辛丹丹，刘喜军，娄春华（1-20）

高流动高等规指数宽相对分子质量分布聚丙烯的制备 ·············································· 周奇龙，谭 忠，于金华，李凤奎（1-25）

PBS-PTMO嵌段共聚物的合成及其结晶动力学 ··································································· 黄 勇，刘俊红，张爱民（1-31）

双向拉伸聚乳酸薄膜的制备 ····································································································· 罗焯欣，董月平（1-36）

聚丙烯/滑石粉复合材料的制备及其力学性能 ···································································· 刘朝福，史双喜，韦雪岩（1-41）

纳米SiO2负载镍催化剂催化环烯烃聚合 ································································································· 郑兴荣（1-44）

建筑涂料用水性聚氨酯乳液的改性研究 ································································································ 邵乘胜（1-48）

凝固浴对聚芳硫醚砜分离膜结构与性能的影响 ························································· 王 越，袁书珊，杨 杰，王孝军（2-1）

PP-g-（DAP-co-GMA）和PP-g-（DAP-co-MAH）的制备及其增容PP/PET ············· 董银春，沈 帆，郭秋月，林永男，徐建平（2-7）

熔融酯交换法合成聚碳酸酯预聚体的研究 ····························· 邓 成，姜慧敏，郑艳春，邱琪浩，王晨晔，傅建永，林润雄（2-12）

微胶囊对环氧树脂力学性能的影响 ······································································ 郭瑞泉，刘景勃，覃兰媚，张发爱（2-16）

雷达用高性能塑料及其表面导电涂层的性能 ····································· 李 萍，吴信涛，赵 宾，徐 杰，薛克敏，瞿启云（2-20）

改性hBN填充氰酸酯复合材料的性能 ···································································· 张有茶，贾成厂，贾 鹏，贾永昌（2-24）

几种Ziegler-Natta催化剂催化丙烯聚合的反应动力学 ····································································· 陈 月，夏先知（2-28）

NaCl浓度对SPFR分散稳定性和封堵性能的影响 ············································ 王 博，林梅钦，李明远，杨子浩，张 娟（2-34）

光致发光PA 66/EuZ复合纤维膜的制备 ············································· 于 翔，赵 珂，王 娜，朱少昌，王延伟，徐 茜（2-37）

基于硅烷偶联剂表面改性PF/CCTO介电复合材料的制备 ······················································ 赵 阳，张永明，苗宗成（2-42）

异丙威荧光分子印迹聚合物的制备 ······································································································ 张小伟（2-46）

聚合温度对乙烯聚合用钒系催化剂FVC-01性能的影响 ············································· 赵增辉，王登飞，付 义，方 宏（2-50）

PS-b-PEO为分散剂的苯乙烯悬浮聚合 ··························································· 张鸿聖，赵忠夫，杨 景，马文花，张春庆（3-1）

助催化剂对BCE催化剂催化乙烯与1-己烯共聚合的影响 ····································· 郭文琦，杨洪瑞，张 震，傅智盛，范志强（3-6）

石墨烯对全同聚1-丁烯结晶性能的影响 ························································ 李 丹，肖作杰，赵 乐，马 晨，赵永仙（3-10）

PVC/MBS/EVA共混物的制备及其抗紫外光老化性能 ······································································ 李文俊，张 勇（3-13）

DQC-602型催化剂的时间依赖性研究 ··································································· 齐 琳，张纪贵，王 宇，张天一（3-19）

一种新型聚丙烯催化剂载体的制备 ················································································· 凌永泰，夏先知，刘月祥（3-23）

纳米TiO2银交换粉体与柠檬酸改性LDPE薄膜的制备 ········································ 贾梦伟，唐亚丽，卢立新，王 军，丘晓琳（3-27）

可生物降解PLA/St/BF复合材料的制备 ······································· 沈华艳，张会平，周盾白，谢 东，贾志欣，陈明周，罗远芳（3-32）

相反转工艺制备聚苯乙烯/聚酯共混物微球 ······························································ 段玉丰，王雨薇，付朝霞，马劲松（3-36）

甲基铝氧烷/钼系催化剂催化苯乙烯配位聚合 ··············································································· 华 静，武 歧（3-41）

高温双检测器凝胶渗透色谱法表征聚乙烯 ········································································ 杨 芳，贾慧青，笪敏峰（3-46）

新型抗静电PET纤维的制备 ·························································································· 李雪莲，薛叙明，付永胜（3-49）

PLA/改性MMT复合材料的性能 ······················································································ 孙岳玲，董彦祥，沈发治（3-53）

长链乙烯酯改性聚乙烯醇的结晶动力学 ············································································ 陈 宁，胡继锋，李 莉（4-1）

食品级聚碳酸酯的光氧老化性能 ·············································· 周从恒，黄彦红，李 丹，孔玲佩，郭 兵，高建国，赵永仙（4-6）

基于正交试验设计的碳纤维对PA 12的静电吸附 ························································· 董 特，冯 凯，李铸国，陶 可（4-9）

PPR/Si-MGO复合材料的制备 ······································ 黄安平，李振友，邹 欣，高 琳，张文学，刘永军，朱博超，谢克锋（4-14）

汽车内饰用低VOC含量聚丙烯复合材料的制备 ··············································· 闫 溥，李荣群，邵之杰，赵 东，汪 波（4-17）

单活性中心茂金属催化剂催化乙烯与1-己烯共聚合 ·················································· 张 瑞，王文燕，王 华，王立娟（4-21）

质子酸催化制备三嵌段稳定剂PCL-PDMS-PCL ··············································· 邓进军，詹世平，商雪航，刘志军，李志义（4-25）

活性炭对聚丙烯酸水凝胶pH敏感性的影响 ················································································· 杨 珊，侯玉龙（4-29）

SBS/无机刚性粒子对苯乙烯-丁二烯嵌段共聚物的增韧改性 ······························ 林士文，官焕祥，黄宝奎，陈平绪，李玉虎（4-33）

超声功率对导电炭黑填充PA 66/PPO共混物性能的影响 ···································· 韦良强，孙 静，黄安荣，董珈豪，石 敏（4-36）

ABMS树脂的制备及性能 ········································································ 王 萍，任 阳，赵博文，任 亮，张明耀（4-40）

反相悬浮聚合法制备耐高温吸水材料及其性能研究 ··················································· 王向鹏，郑云香，张春晓，蒋秀燕（4-44）

偶联剂KH570对吸油树脂性能的影响 ················································ 李 杨，白琪俊，段攀峰，伍玉娇，刘学金，赵 行（4-47）

纳米TiO2改性PVDF超滤膜的制备 ····················································· 李小玉，何桂荣，柳滢春，王 鹏，朱景培，刘国强（4-51）

烷基铝预还原铬钒双中心催化剂的制备及其催化乙烯聚合 ··················································· 李文博，赵 柠，刘柏平（5-1）

Z-N催化剂用于原位合成球形聚1-丁烯/聚丙烯合金 ······························· 任合刚，荣丽丽，王登飞，王斯晗，高宇新，刘宾元（5-7）

新型负载型硅/镁复合Z-N催化剂的制备及其催化1-丁烯聚合 ······································ 刘文旭，朱 伟，赵 柠，刘柏平（5-12）

含环氧基的氟涂覆剂的制备与应用 ··················································· 邢杰慧，罗惠泽，唐旭东，马 驰，齐迎昊，孙思婷（5-16）

聚烯烃弹性体/碳纳米管/炭黑复合材料的性能 ············································· 刘广永，李雪健，祝孝天，张 伟，邱桂学（5-20）

α-二亚胺镍催化剂催化乙烯溶液聚合的性能 ················································· 赖菁菁，高 榕，周俊领，李 岩，刘东兵（5-24）

异佛尔酮二胺/4,4'-二氨基二苯砜复合固化EP/CTBN ······························ 刘青松，任 亮，刘伯军，朱福朋，赵博文，张明耀（5-28）

多价金属与丙烯酸自交联包覆改性铝粉 ······························································· 龚德朋，马腾飞，李德重，孙义明（5-33）

PPGDGE对二次固化环氧树脂性能的影响 ····················································· 谢贺丰，艾娇艳，黄树彬，叶天焜，卢梓铿（5-37）

PDMS-PEG核壳结构复合粒子的制备 ············································································· 孙迎迎，刘喜军，娄春华（5-41）

乙烯气相聚合工艺参数优化及反应过程的数学模型建立 ··········································································· 罗静彦（5-46）

固体酸催化法合成壬基酚醛树脂的新工艺优化 ································································· 肖先举，唐学红，王德堂（5-51）

磺酰卤基羟丙基瓜尔胶的合成及其性能 ····················································································· 侯慧玉，曾广胜（5-54）

高透明导光聚苯乙烯的开发 ························································································· 戴莹莹，王 艳，宋立臣（5-57）

镁负载量对SiO2/MgCl2复合载体型Ziegler-Natta催化剂的影响 ················································· 诸 亮，何雪莲，刘柏平（6-1）

主链含苯环十字型硅钛树脂的合成 ······································································· 武建华，姜爱叶，吴佳伟，张孝阿（6-8）

AlCl3/含氧引发剂催化体系合成中、高相对分子质量PIB ··········································· 陈 亮，朱志华，刘 振，刘柏平（6-13）

硅烷偶联剂改性酚醛树脂的合成 ··················································· 游胜勇，戴润英，董晓娜，李 玲，陈衍华，曹 修（6-17）

PLA/H-MMT纳米复合材料的微波辅助制备及反应动力 ······················································· 曹海雷，蔡奉颖，王 鹏（6-20）

RAFT沉淀法制备杀虫脒分子印迹聚合物及其应用 ········································································ 马鹏飞，韩生华（6-25）

阴离子开环聚合合成超高相对分子质量聚硅氧烷 ······························································ 漆 刚，姜会平，熊 婷（6-30）

熔融沉积成型PLA/麦秸粉复合材料的抗老化性能 ······························································ 毕永豹，杨兆哲，许 民（6-34）

黏土种类及用量对AA-AM-AMPS多孔型高吸水树脂性能的影响 ································· 于 智，刘 闯，何 聚，杨 玲（6-39）

TPS/PVA共混物的热降解行为 ·································································· 刘钰馨，范丽兰，莫羡忠，庞锦英，杨 芳（6-43）

聚丙烯酸钠/沸石复合调湿材料的制备 ······················································································· 张珂峰，沈强儒（6-46）

聚氨酯/废旧聚乙烯纤维复合材料的制备 ···················································································· 刘井红，吴晓青（6-49）

工业技术

聚甲醛生产中的挥发分脱除 ·············································································································· 邓立伟（1-52）

不同Ziegler-Natta催化剂对聚丙烯性能的影响 ···································································· 沈永斌，李 磊，黄 河（1-57）

DQS-1催化剂在Z30S树脂生产中的应用 ································································· 张纪贵，夏先知，刘月祥，李威莅（2-53）

LLDPE装置高负荷运行瓶颈及优化措施 ······················································································ 毛文华，李立力（2-57）

气相比及氢气用量对聚丙烯合金性能的影响 ··················································· 刘小燕，侯景涛，王 海，卢晓玮，董万卓（3-56）

用BCL-100型催化剂在Innovene S工艺装置上生产HDPE粉料的性能 ································ 刘志伟，秦 川，朱孝恒，曹 雷（3-61）

BCM-100H型催化剂在Horizone聚丙烯装置上的工业应用 ······················································· 别朝晖，毛文华，靳鹏举（3-64）

DQS-1催化剂的性能及工业应用 ······························································· 张纪贵，夏先知，刘月祥，李威莅，齐 琳（3-68）

熟化工艺对G-ABS凝聚颗粒粒径和致密度的影响 ·············· 刘 姜，王 亮，张 辉，梁皓月，李 睿，单崇杰，宋振彪，陆书来（3-73）

膜分离回收系统在全密度聚乙烯装置上的应用 ·································································· 王 喆，于国滨，刘兴旺（3-77）

聚丙烯断裂标称应变问题研究 ·································································································· 施红伟，唐毓婧（4-56）

纤维专用聚丙烯气味原因分析及生产建议 ····························································· 朱 军，张 璐，龚树鹏，胡廷芳（4-60）

特殊形状小中空容器专用HDPE的开发 ·································································· 王世华，国海峰，郭 峰，于 波（5-61）

G-ABS胶乳连续凝聚过程及工艺分析 ······································· 刘 姜，王 亮，张 辉，刘文辉，闫柏郁，宋振彪，陆书来（5-65）

高密度聚乙烯淤浆环管工艺反应器黏壁原因及减缓措施 ································· 高胜利，王景方，惠 ，刘 浪，杜 浩（6-53）

高MFR抗冲击共聚聚丙烯2240S的开发 ············································································ 王居兰，田广华，胡 琳（6-58）

加工设备与应用

微孔注塑成型过程的Moldflow模拟仿真 ······················································································· 韩 云，林有希（1-60）

基于田口实验的快速冷热成型MP4外壳注塑工艺优化 ···································································· 罗华云，冯永平（1-66）

Y型异型材气辅共挤出胀大的三维等温数值模拟 ··········································· 陈璐璐，柳和生，黄兴元，黄楚晔，段翔宇（2-68）

Zigbee监控网络下注塑机注塑性能稳定性及注塑产品质量 ···················································· 黄 鑫，王 秋，李忠武（2-73）

高流动抗冲共聚聚丙烯相结构的流变学 ·························· 娄立娟，王艳芳，张丽洋，杜 斌，陈商涛，姜 凯，俞 炜，黄 强（3-80）

羧基丙烯酸树脂微乳液的制备及其在3D打印中的应用 ··························· 聂建华，程 江，杨卓如，吴皎皎，王 俊，戴春桃（3-85）

耐热聚乙烯的加工性能 ··········································································· 马小伟，乔亮杰，莫 明，胡廷芳，杨 帆（4-77）

低摩擦因数CPP热封膜的研究 ··································································· 张莉琼，刘晓艳，赵素芬，熊立贵，涂志刚（4-81）

制样方法对等规聚丙烯连续自成核退火的影响 ·································································· 贾慧青，杨 芳，笪敏峰（5-84）

汽车内饰件收纳盒的模具创新优化设计 ······················································································ 王 乾，徐自明（6-74）

结构与性能

PE100级管材专用树脂的结构和性能 ·························································· 关 莉，胡 斌，朱 军，席 军，缪 江（1-70）

管材专用PE-RT的结构与性能 ·································································· 马小伟，朱 军，胡 斌，刘广宇，龚毅斌（1-73）

抗冲共聚聚丙烯的组成及其结晶行为 ··································································· 施红伟，刘宣伯，郭梅芳，宋文波（1-77）

低密度聚乙烯长支链含量的测定 ········································································· 王文燕，马 丽，和树立，郭桂悦（2-61）

管件专用HDPE的结构与性能 ··································································· 龚毅斌，朱 军，朱新远，胡 斌，吴春霜（2-64）

热收缩膜专用低密度聚乙烯2420D的结构与性能 ······················································· 李冬霞，宋 磊，王 华，付 强（4-65）

透明易加工LLDPE的结构与性能 ···················································································· 李 瑞，葛腾杰，王世华（4-69）

管材专用耐热聚乙烯的动态流变行为 ······································· 王群涛，高凌雁，郭 锐，王日辉，王雪梅，许 平，石 晶（4-74）

NMR研究不同牌号PE-RT和PE100管材的结构 ···························· 高凌雁，王群涛，郭 锐，王日辉，许 平，石 晶，侯 斌（5-70）

不同工艺生产的防水阻隔专用树脂的结构与性能 ······················································· 王 华，杨 勇，韦德帅，张 瑞（5-74）

釜式法淤浆工艺生产的PE100级管材专用树脂的性能 ···························································· 姜 平，路全能，刘 涛（5-77）

发泡剂和催化体系对软质聚氨酯泡沫结构和性能的影响 ············································· 王 轩，魏 徵，王源升，王方超（5-80）

核磁共振法测定EVA中的VA含量和序列结构 ·························································································· 卜少华（6-63）

滚塑用交联聚乙烯的结构与性能 ······························································· 任月庆，董 侠，陈学连，王笃金，梁文斌（6-66）

管材专用聚1-丁烯的非等温结晶动力学 ····················································· 马 丽，金 毅，王文燕，任合刚，张怀志（6-71）

综 述

阻燃型聚酰胺66的研究进展 ················································································ 成沂南，田留华，吕文晏，崔益华（1-81）

BOPP薄膜专用树脂的研发与应用进展 ············································· 谭魁龙，陈兴锋，袁 苑，汪乃东，苏玉山，义建军（1-85）

PPR低温增韧改性研究进展 ················································································ 黄 凯，廖秋慧，张忆顺，吴慧君（1-91）

建筑节能型相变微胶囊材料的研究进展 ··········································································· 张 娅，邰明明，张 敏（1-95）

APC技术在聚丙烯装置上的应用 ·········································································································· 刘 屏（1-99）

聚氨酯泡沫阻燃技术的研究进展 ···················································································· 王方超，魏 徵，王源升（2-77）

Ziegler-Natta催化剂中各组分相互作用研究进展 ································· 谢克锋，邹 欣，张文学，高 琳，朱博超，黄安平（2-82）

生物基聚酰胺制备及应用研究进展 ················································································· 张龙贵，计文希，李 娟（2-86）

高聚物“结构控制”加工成型工艺研究进展 ·························································································· 王洪见（2-92）

DMTO装置副产物C4综合利用工艺的选择与应用 ······················································································ 齐 薇（2-98）

石墨烯掺杂聚丙烯复合材料的制备、性能及应用研究进展 ······················· 袁祖培，陈 洁，唐俊雄，唐三水，李羽凡，张旺玺（3-88）

游艇用纤维增强复合材料在海洋环境下加速老化研究进展 ····················································· 李 萌，宾远红，李培芬（3-93）

现代塑料挤出设备自动控制研究进展 ··································································································· 吕秀亭（3-99）

自修复材料应用研究进展 ········································································································ 牛丽红，邓 利（4-85）

计算机仿真在塑料加工工艺优化领域的应用研究进展 ···································································· 陈凤琴，陈宇刚（4-90）

SMA的合成及改性研究进展 ················································································································ 董淑春（4-94）

2009—2016年聚乙烯醇缩丁醛及其膜片市场分析 ···················································································· 季树花（4-98）

汽车保险杠专用复合材料及其成型工艺研究进展 ······························································· 黄 凯，廖秋慧，陈 杰（5-87）

核磁共振波谱表征弹性体支化结构方法的研究进展 ···························································· 罗俊杰，卜少华，黄 铃（5-92）

CAD/CAE一体化技术在塑料制品制造中的应用 ············································································ 谢日星，李文蕙（5-98）

低VOC含量塑料制备与加工技术及其在汽车内饰中的应用 ······································································· 褚松茂（5-102）

全密度聚乙烯生产工艺进展及市场现状 ···························································································· 包七十三（5-106）

新型环三磷腈阻燃剂的研究进展 ········································· 李伶通，祝颖丹，刘 东，陈 刚，徐海兵，刘文庆，颜 春（6-78）

异构化PI单体的合成方法及其对PI tg的影响分析 ································ 高阳峰，刘小龙，荣卫锋，徐兴亚，夏 池，翟英文（6-84）

聚乳酸复合材料的研究进展 ····································································································· 王惠娟，杨丽娟（6-88）

塑料加工成型技术现状及研究进展 ······································································································ 刘红燕（6-93）

计算机辅助技术在塑料包装设计中的应用 ··················································································· 章小丹，牛兴霞（6-97）

简 讯

茂名石化公司生产高端聚丙烯新产品 ············································································································ （1-15）

茂名石化公司生产出新型管材专用PPR ············································································································ （1-51）

中石油研发高端专用淤浆工艺聚乙烯催化剂 ··································································································· （2-63）

广州石化聚丙烯新装置投产 ························································································································ （2-97）

2016年我国多套新建聚丙烯装置建成投产 ······································································································ （3-52）

宁波建世界单套最大氢化C9树脂装置 ············································································································ （3-72）

2016年我国聚丙烯进口量同比下降11.2% ······································································································· （3-76）

吉林石化建成国内首套PMMA中试装置 ·········································································································· （3-84）

2016年我国聚碳酸酯进口量同比减少7.6% ······································································································ （3-98）

2016年我国聚氯乙烯的进出口量双双递增 ······································································································ （4-68）

2016年我国聚乙烯的进出口量双双递增 ········································································································· （4-76）

我国超高相对分子质量聚乙烯管材走向世界 ··································································································· （5-50）

中国石化启动合成树脂重大项目开发 ·············································································································· （6-7）

安徽建BOPA膜项目 ··································································································································· （6-12）

武汉乙烯产出聚丙烯新品 ··························································································································· （6-92）