内燃机与配件
设计研究
- 纯电动汽车坡道起步防溜系统及控制策略的研究 Research on the Anti-Slip System and Anti-Slip Control Strategy of Pure Elect
- 气缸套网格状激光淬火机床设计 Design of Grid Laser Quenching Machine Tool for Cylinder Liner
- Arduino在汽车CAN通讯中的应用研究 Research on the Application of Arduino in Automobile CAN Communication
- 内燃机零部件结构设计及应用研究 Structural Design and Application Study of Internal Combustion Engine Components
- 汽车智能熄灯保护系统的开发 Development of Intelligent Lights-off Protection System for Automobile
- 基于Workbench的炭罐电磁阀流量特性分析与优化 Analysis and Optimization of Canister Purge Valve Flow Characteristics Based on Workbench
- 不同针阀头型对喷油嘴性能的仿真研究 Nozzle Flow Simulation for Different Needle Type
- 履带车辆双电机耦合驱动机构设计研究 Design and Research of Dual-motor Coupling Drive Mechanism for Tracked Vehicles
工艺技术
- 铣削加工工艺参数优化研究 Research on Optimization of Milling Process Parameters
- 论发动机动力单元装配工艺的重要性 On the Importance of Assembly Process of Engine Power Unit
- 一种车用空压机半自动化装配线的设计应用 Design and Application of Semi-automatic Assembly Line of Air Compressor
- 内燃机活塞环表面处理技术研究 Research on Surface Treatment Technology of Piston Ring of Internal Combustion Engine
- 压铆螺母强度及疲劳寿命试验研究 Experimental Research on Strength and Fatigue Life of Self-Riveting Nuts
- 纸盒式干式喷房下的风平衡探索与实践 Exploration and Practice of Wind Balance under Carton Dry Spray Booth
- 涡电流分选在报废汽车中的应用研究 Research on the Application of Eddy Current Separation in End-of-life Vehicles
- 航空用TA18高强钛合金管材弯曲成形技术及研究进展 The Bending Technology and Research Progress of TA18 High-strength Titanium Pipe for Aviation
产品分析
- 路面加速加载设备转向系统研究 Research on Steering System for Pavement Accelerated Loading Equipment
- 涡轮增压器叶轮轴心孔断裂故障分析及改善 Failure Analysis and Improvement of the Fracture of the Inner Hole of the Turbocharger Impeller
- 基于高速转台下的发动机压力测量系统分析 Analysis of Engine Pressure Measurement System Based on High Speed Turntable
- 试析船舶低速柴油机余热综合回收系统 Analysis of the Comprehensive Residual Heat Recovery System of Ship Low-speed Diesel Engine
- 浅析发动机动力升级技术 Analysis on the Engine Power Upgrading Technology
- 内燃机高压油管供喷平衡的动力分析 Dynamic Analysis of the Balance of High Pressure Fuel Pipe Supply and Injection for Internal Combustion Engines
- 关于某车型转向开关自动回位问题的分析与研究 Analysis and Research on the Problem of Automatic Return of Steering Switch of a Vehicle Type
- 汽油机涡轮增压器压气机内流场分析和优化措施 Flow Field Analysis and Optimization Measures in Turbocharger Compressor of Gasoline Engine
- 电控式AMT脱挡机理分析与预防 Analysis and Prevention of the Mechanism of Electronically Controlled AMT Shifting
- 汽车翼子板抗凹刚度有限元分析 Finite Element Analysis of the Concave Stiffness of Automobile Fender
- 履带式电动拖拉机动力学分析与整机建模 Dynamic Analysis and Modeling of Tracked Electric Tractor
装备技术
- 基于NX/Post的五轴数控机床后置处理器研究与开发实践 Research and Development Practice of Post Processor of Five Axis NC Machine Tool Based on NX/Post
- 基于物联网的数控机床装配物料配送体系研究 Research on NC Machine Tool Assembly Material Distribution System Based on IOT
- 基于机械模具数控加工制造技术及应用分析 NC Machining and Manufacturing Technology Based on Mechanical Die and Its Application Analysis
- 关于航天薄壁框架类零件数控加工变形抑制方法的研究 Research on the Suppression of Thin-wall Frame Parts
- 转子导条滚压涨紧压力计算 Calculation of Rolling Tension Pressure of Rotor-bar
- 数控技术在汽车底盘生产中的应用研究 Research on Application of Numerical Control Technology in Automobile Chassis Production
- 高空作业车工作平台速度处理对策研究 Study on Speed Treatment Countermeasures of Working Platform of Aerial Work Vehicle
- 内燃机车电气控制系统的实践研究 Practical Study on Electric Control System of Internal Combustion Locomotive
- 液压传动技术在汽车中的应用及发展趋势 Application and Development Trend of Hydraulic Transmission Technology in Automobile
- 数控车床自动上下料机械手结构设计 Structural Design of CNC Lathe
- CAD技术与机械制图关键技术分析 Analysis of CAD Technology and Key Technology of Mechanical Drawing
制造工艺
- 铸造工艺对机械轴承座性能的影响探析 Influence of Casting Process on Mechanical Bearing Housing
- 某型号柴油机曲轴中心孔修正工艺研究及验证 Research and Verification on Correction Technology of Crankshaft Center Hole of a Diesel Engine
- 机械加工工艺对汽车零部件精度的影响分析 Analysis of Influence of Machining Technology on Precision of Auto Parts
- 90°外圆车刀的刃磨技巧及应用研究 Research on Grinding Technique and Application of 90° Cylindrical Turning Tool
- 基于方向盘注塑模在UG中设计与制造的应用研究 Design of CNC Machine Tool Automatic Production System Based on Cloud Manufacturing
- 发动机气缸盖数控加工工艺研究 Research on NC Machining Technology of Engine Cylinder Head
- 汽车发动机曲轴机械加工技术分析 Analysis of Automobile Engine Crankshaft Machining Technology
- 16缸曲轴中频感应淬火变形的系统解决方案 System Solution of Medium Frequency Induction Hardening Deformation of 16 Cylinder Crankshaft
质量与检修
- 共轨柴油机限压阀打开故障的研究与分析 Research and Analysis of Pressure Limiting Valve Opening Fault of Common Rail Diesel Engine
- 工程机械液压系统的现场故障诊断与维修技术研究 Research on On-site Fault Diagnosis and Maintenance Technology of Construction Machinery Hydraulic System
- 现代汽车维修中电子诊断技术的运用分析 Analysis of the Application of Electronic Diagnosis Technology in Modern Automobile Maintenance
- 钣金焊接成型的常见问题及其焊接质量控制 Common Problems of Sheet Metal Welding Forming and Its Welding Quality Control
- 新能源汽车维修与故障诊断技术探究 Research on New Energy Vehicle Maintenance and Fault Diagnosis Technology
- 比亚迪e5纯电动车无法上电故障诊断与排除 Fault Diagnosis and Troubleshooting of BYD E5 Pure Electric Vehicle Unable to Power on
- 汽车空调制冷系统常见故障分析及诊断方法研究 Research on Common Failure Analysis and Diagnosis Method of Automobile Air-conditioning Refrigeration System
- 数控机床的故障诊断及消除措施 Fault Diagnosis and Elimination Measures of CNC Machine Tools
- 汽车维修中常见问题与优化措施探讨 Discussion on Common Problems and Optimization Measures in Automobile Maintenance
- 航空发动机涡轮叶片故障诊断分析方法 Analysis Method of Fault Diagnosis of Turbine Blades for Aero Engines
- 电子诊断在现代化汽车维修技术中的应用研究 Application of Electronic Diagnosis in Modern Automobile Maintenance Technology
- 燃气轮机气路故障诊断技术探讨 Discussion on Fault Diagnosis Technology of Gas Turbine Gas Circuit
- 数据融合下的异步电动机故障诊断 Fault Diagnosis of Asynchronous Motor Based on Data Fusion
- 新能源汽车电气设备的检修研究 Research on Maintenance of Electrical Equipment of New Energy Vehicles
- 航空发动机试车现场振动测量的干扰与排除 Interference and Elimination of On-site Vibration Measurement for Aeroengine Test Run
- 汽车底盘构造与维修保养浅析 Analysis on the Structure and Maintenance of Automobile Chassis
- 汽车发动机冷却系统故障检测与维修 Fault Detection and Maintenance of Automobile Engine Cooling System
- 新能源汽车常见故障诊断及维修技术分析 Common Fault Diagnosis and Maintenance Technology Analysis of New Energy Vehicles
- A320大翼油箱燃油溢出原因分析 Cause Analysis of Fuel Overflow of A320s Fuel Tank
- 探究客车采暖散热器防腐蚀防杂物问题的应对策略 Exploring the Countermeasures for the Problem of Anti-corrosion and Anti-wandering of Heating Radiators in Passenger Cars
- 汽车发动机检测技术的运用研究 Research on Application of Automobile Engine Detection Technology
- G1000 NXI系统警告信息排故方法研究 Research on Troubleshooting Method of Warning Information in G1000 NXI System
- 某国六车型发动机故障灯亮问题分析与处理 Analysis and Solution of CN-6 Vehicles Engine Fault Light
- 反应堆用应急柴油发电机组冷却水系统故障原因分析及处理 Cause Analysis and Treatment of Failure of Cooling Water System of Emergency Diesel Generator Set for Reactor
- 汽车电器系统故障诊断对策及维修方法探讨 Discussion on Fault Diagnosis Countermeasures and Maintenance Method of Automobile Electrical Appliance System
- 汽车发动机常见故障分析及起动困难研究 Analysis of Common Faults of Automobile Engine and Research on Starting Difficulty
- 汽车冷却系统的保养与维护 Maintenance of Automotive Cooling System
- 汽车发动机缸体和缸盖的清洗技术讨论和管理维护 Automobile Engine Cylinder Block and Cylinder Head Cleaning Technology Discussion and Management Maintenance
- 飞机发动机维修过程中的静电防护分析 Analysis of Electrostatic Protection in Aircraft Engine Maintenance
- 工程机械液压传动原理、故障诊断与排除 Principle, Fault Diagnosis and Troubleshooting of Hydraulic Transmission of Construction Machinery
- 柴油机水泵常见故障及处理 Common Fault and Treatment of Diesel Engine Water Pump
企业管理
- 绿色理念在机械设计制造中的渗透分析 Permeation Analysis of Green Concept in Mechanical Design and Manufacture
- 机械制造加工设备的安全管理与维修 Safety Management and Maintenance of Mechanical Manufacturing and Processing Equipment
- 电动汽车技术原理及发展展望 Technical Principles and Development Prospects of Electric Vehicles
- 现代化机械设计制造工艺及精密加工技术分析 Analysis of Modern Machinery Design and Manufacturing Technology and Precision Processing Technology
- 基于增程式电动汽车发展现状及趋势研究 Research on Development Status and Trend of Electric Vehicle Based on Incremental Programming
- 信息时代下高职院校智能网联汽车技术专业发展分析 Analysis on the Professional Development of Intelligent Networked Automobile Technology in Higher Vocational Colleges in the Information Era
- 机械设备管理信息化建设探析 Discussion on Information Construction of Mechanical Equipment Management
- 电动汽车充电桩电能计量中的问题分析 Analysis on Problems in Electric Energy Measurement of Electric Vehicle Charging Pile
- 刍议数据分析在发动机装配线产能提升中的应用 Discussion on the Application of Data Analysis in the Increase of Engine Assembly Line Capacity
- 基于冶金设备管理与维修技术的要点分析 Analysis of Key Points Based on Metallurgical Equipment Management and Maintenance Technology
- 关于提高机械设计制造及其自动化的有效途径探讨 Discussion on Effective Ways to Improve Mechanical Design, Manufacturing and Automation under the Background of the New Era
- 船舶柴油发动机的维护现存问题及完善对策 Existing Problems and Improvement Countermeasures of Marine Diesel Engine Maintenance
- 机械制造中自动化技术的应用探究 Research on the Application of Automation Technology in Machinery Manafacturing
- 基于重型柴油货车排放治理的探讨 Discussion on Emission Control of Heavy Diesel Truck
- 基于新环境下汽车维修的改进思想与策略探索 Exploration on Improvement Ideas and Strategies of Automobile Maintenance Based on the New Environment
- 数控加工技术在机械加工制造中的应用 Application of CNC Machining Technology in Mechanical Manufacturing
- 机电一体化工程技术的应用及发展趋势分析 Analysis on the Application and Development Trend of Mechatronics Engineering Technology
- 造船精度管理关键问题及对策 Key Problems and Strategies of Shipbuilding Precision Management
- 汽车零配件制造用机械保养分析 Analysis of Mechanical Maintenance for Auto Parts Manufacturing
- 模具工程的智能化发展探究 Research on Intelligent Development of Die and Mould Engineering
技术创新与应用
- 传感器在汽车电子控制系统中的应用 Application of Sensor in Automotive Electronic Control System
- 机器人装配作业轨迹规划研究 Research on Trajectory Planning of Robot Assembly Operation
- 绿色设计法在机械设计制造中的应用 Application of Green Design Method in Mechanical Design and Manufacture
- 基于CATIA DMU的玻璃升降系统运动仿真与设计优化 Motion Simulation and Optimization of Glass Lifting System Based on CATIA DMU
- 动力电池总成装调平台的单体电池均衡性测试 Single Battery Balance Test for Power Battery Assembly Installation Platform
- 基于三菱FX3U PLC切线机控制系统设计 Design of Cutting Machine Control System Based on Mitsubishi FX3U PLC
- PLC技术在机电自动化控制中的应用探究 Application of PLC Technology in Electromechanical Automation Control
- 浅析电子控制制动系统在挂车上的应用 Application and Research of Electronic Control Braking System on Trailer
- 新能源汽车动力蓄电池梯次利用的相关探讨 Discussion on Echelon Utilization of Power Batteries of New Energy Vehicles
- 改进的萤火虫算法在双缸同步控制系统中的应用 Application of Improved Firefly Algorithm in Double Cylinder Synchronous Control System
- 基于油电混合动力技术在无人机中的应用 Application of Hybrid Electric Technology in UAV
综合
- 1+X证书制度下汽车运用与维修技术专业实训资源建设路径 Construction Path of Training Resources for Automobile Application and Maintenance Technology Specialty under 1+X Certificate System
- 基于混合教学法的汽车电气课程教学改革探究 Research on Teaching Reform of Automobile Electrical Course Based on Mixed Teaching Method
- 项目教学法在工程训练数控铣床实践教学中的探索 Exploration of the Project Teaching Method in the Engineering Training Practice Teaching of CNC Milling Machine
- “六步法”在工作过程一体化课程中的应用 Application of the "Six-step Method" in the Integrated Work Process Course
- 汽车运用与维修专业现代学徒制岗位职业能力探析 An Analysis of Vocational Ability of Modern Apprenticeship in Automobile Application and Maintenance
- 汽车检修实训台架与教学任务匹配研究 Study on Matching of Automobile Maintenance Training Platform and Teaching Task
- 探析机械零件数控车削加工理实一体化课程开发 Development of the Integrated Course of NC Turning of Mechanical Parts
- 船舶轮机系统虚拟仿真实验平台建设 Construction of Virtual Simulation Experiment Platform for Marine Engineering System
- 《工业机器人操作与编程》项目化教学设计 Project Teaching Design of Industrial Robot Operation and Programming
- VR在“1+X”工业机器人操作与运维培训中的应用 Application of VR in Operation and Maintenance Training of "1+X" Industrial Robot