TAPPI JOURNAL 2021年第2期目次

TABLE OF CONTENTS VOL. 19 NO. 7

» As a TAPPI member, you receive access to allTAPPI Journalresearch or you can download individual papers for a minimal charge. For more information, visit www.tappijournal.org.

75 EDITORIAL

Change, reality, and vision in the pulp and paper industryJohn Neun

81 PAPERBOARD

Key material properties in crease cracking of kraft paperBabak Mirzaei, Trey Harksen, Swan Smith, and Joel Panek

91 TISSUE

An evaluation of household tissue softnessYuan-Shing Perng, Tser-Ying Teng, and Ching-Ho Chang

111 ENVIRONMENTAL

A case study review of wood ash land application programs in North AmericaIlich Lama and Derek Sain

123 PAPERMAKING

Modeling and parameter optimization of the papermaking processes by using regression tree model and full factorial designJosé L. Rodriguez-Alvarez, Rogelio Lopez-Herrera, Iván E. Villalon-Turrubiates, Gerardo Grijalva-Avila, and Jorge L. García Alcaraz

139 BYPRODUCTS

Continuous tannin extraction by use of screw reactorMarkku Kuosa, Antti Heikkinen, Tapio Tirri, and Lasse Pulkkinen

»COVER CREDIT:Finnish researchers Kuosa, Heikkinen, Tirri, and Pulkkinen used a pilot-scale screw reactor to extract tannin from spruce, showing that yield was the same or better than with batch reactors (p. 139). Their most surprising finding was how much presoaking of bark affects tannin yield, with longer times providing better results.

Editor-in-Chief

Peter W. Hart peter.hart@westrock.com

+1 409 276-3465

Associate Editor

Douglas W. Coffin coffindw@miamioh.edu

+1 513 529-0771

Editorial Director

Monica Shaw mshaw@tappi.org

+1 770 367-9534

PRESS Manager

Jana Jensen jjensen@tappi.org

+1 770 209-7242

Webmaster

Trina Heath theath@tappi.org

+1 770 209-7416

TJ EDITORIAL BOARD

Randy Branston, BASF

randy.branston@basf.com, +1 704 819-4251

Brian N. Brogdon, FutureBridge Consulting & Training LLC

brian.brogdon@gmail.com, +1 678 581-9114

Douglas W. Coffin, Miami University

coffindw@miamioh.edu, +1 513 529-0771

Mahendra Doshi, Doshi and Associates

mahen@aol.com, +1 920 832-9101

Marc Foulger, Valmet

marc.foulger@valmet.com +1 315 767-2920

Peter W. Hart, WestRock

peter.hart@westrock.com, +1 409 276-3465

Carl J. Houtman, USDA Forest Products Laboratory

choutman@fs.fed.us, + 1 608 231-9445

Vamsi Jasti, Ahlstrom-Munksjo Nonwovens LLC

jvamsik1@gmail.com, +1 818 585-3524

Lucian Lucia, North Carolina State University

lucian.lucia@gmail.com, +1 919 889-7059

John A. Neun, John A. Neun LLC

john.neun@gmail.com, +1 518 275-8139

Jim Niemiec, Jim Niemiec Consulting LLC

jim.niemiec@outlook.com, +1 715 213-4766

Steven P. Ottone, Omya

steven.ottone@omya.com, +1 919 641-7854

Gaurav Pranami, Imbed Biosciences

gpranami@imbedbio.com, +1 515 230-7005

Arthur Ragauskas, Oak Ridge National Laboratory

aragausk@utk.edu

Gerard J.F. Ring, University of Wisconsin—Stevens Point

gerrryring@wi-net.com, +1 715 592-3732

Scott Rosencrance, Kemira Chemicals

scott.rosencrance@kemira.com, +1 770 429-2753

Paul Wiegand, NCASI

pwiegand@ncasi.org, +1 919 941-6417

Junyong Zhu, USDA Forest Products Laboratory

jzhu@fs.fed.us, +1 608 231-9520

Join TAPPI today!

TAPPI JOURNAL is a free benefit of TAPPI membership, and is only available to members. To join TAPPI, to renew your TAPPI Membership, or to learn about other valuable benefits, visit www.tappi.org.

TAPPI, 15 Technology Parkway S., Suite 115,

Peachtree Corners, GA 30092, publishesTAPPI JOURNALmonthly.

ATTENTION PROSPECTIVE AUTHORS:All papers published are subject toTAPPI JOURNAL’speer-review process. Not all papers accepted for review will be published. Before submitting, check complete author guidelines at http://www.tappi.org/s_tappi/doc.asp?CID=100&DID=552877.

Statements of fact and opinions expressed are those of individual authors. TAPPI assumes no responsibility for such statements and opinions. TAPPI does not intend such statements and opinions or construe them as a solicitation of or suggestion for any agreed-upon course of conduct or concerted action of any sort.

Copyright 2021 by TAPPI, all rights reserved. For copyright permission to photocopy pages from this publication for internal or personal use, contact Copyright Clearance Center, Inc. (CCC) via their website: www.copyright.com. If you have questions about the copyright permission request process, please contact CCC by phone at +1 978 750-8400.

To obtain copyright permission to use excerpts from this publication in another published work, send your specific request in writing to Editor, TAPPI JOURNAL, 15 Technology Parkway S., Suite 115,

Peachtree Corners, GA 30092, USA; or by fax to +1 770 446-6947.

Send address changes to TAPPI, 15 Technology Parkway S., Suite 115, Peachtree Corners, GA 30092, USA; Telephone +1 770 446-1400, or FAX +1 770 446-6947. www.tappi.org

FEBRUARY 2021 | VOL. 20 NO. 2 | TAPPI JOURNAL 7 5