《太原科技大学学报》2016年总目次



《太原科技大学学报》2016年总目次

第37卷 第1期(总第153期)

计算机科学与信息工程

一种基于粗糙集的视觉单词生成方法

赵鹏坤，时恺泽，张素兰(01)

莱维飞行与粒子群的混合搜索算法

牛海帆，宋卫平，宁爱平(06)

塔式起重机的分数阶滑模定位和防摆控制

陈志梅，孙 辉，张井岗，邵雪卷(12)

基于改进蚁群算法在软件缺陷预测中的应用

杨泽辉，李 琳，乔冰琴(17)

IGBT应用于VSC-HVDC中的关键技术研究

雒明浩，孙志毅，刘立群(22)

大型阵列式太阳能热发电定日镜跟踪系统设计

田 行，刘立群，葛 竹，曹 伟，张国梁(27)

基于磁谐振无线输电系统的设计

陈 伟，孙志毅，刘立群(32)

振动筛悬挂钢丝绳的振动分析与研究

刘宏谦，李永康(36)

机械工程与材料科学

基于蠕变试验的ZChSnSb11-6应力松弛特性研究

苗克军，王建梅，李 璞，徐俊良，张笑天，张亚南(39)

一种解决多属性决策问题的新方法

晋民杰，谢 涛，王 快，范 英，韩 飞(45)

基于Pro/E双圆弧齿轮参数化建模及虚拟装配仿真

冀 斌，王春燕，卢丽娟，孙天华(50)

城市公交停靠站耗时模型研究

韩智强，宋 晨，贾志绚，刘建麟，申泽国，李潇楠(53)

基于改进AHP算法的桥梁风险评估模型的研究

任丽超，栗振锋，邢继星，程劲钊，翟文卿，韩 飞(59)

时间累积效应对油膜轴承油粘度的影响研究

张亚南，王建梅，张艳娟，张笑天(64)

应用科学

PAN基碳纤维表面镀镍及高温力学性能研究

晋艳娟，杨 昆，李盛静，张 柱，杨雪霞(68)

一种求解二次模型信赖域子问题的Adams方法

王英慧，王希云(72)

多孔板等效弹性常数的均匀化预测及实验研究

杨 昆，晋艳娟，李盛静，崔小朝(77)

第37卷 第2期(总第154期)

计算机科学与信息工程

基于灰色神经网络的设备剩余寿命在线预测

史华洁，薛颂东(81)

切换系统处理的网络化控制系统稳定性分析

魏 宇，孙志毅(87)

基于LabVIEW的电能质量监测实验平台设计

刘勇平，张井岗，赵志诚，罗文娟(92)

大型变压器顶升装置的复合控制器设计

杨 琛，于少娟(98)

一种提取体式显微镜图像特征点的方法

张芸蕾，范胜利，王一刚(103)

双向DC/DC变换器在直流微网中的应用

刘 晓，刘立群，吴祥辉，赵晓博(108)

机械工程与材料科学

一种改进的锂电池PNGV模型研究

王少江，何秋生，许亚朝，成 熊(114)

线材轧机轴承运行稳定性数值分析与试验研究

蔡 敏，王建梅，张亚南，张艳娟，吉宏斌(119)

九轴全地面起重机轴荷仿真计算与分析

秦耀东，张喜清(125)

钢筋切断机特制斜刀片的设计与分析

张 宇，肖 强(130)

应用科学

采空区埋地管道沉降变形分析

杨晓辉，赵子龙，李 忱，张永升，耿 佳(134)

利用桥梁响应二维相空间损伤识别的数值研究

张 雷，张伟伟(140)

横观各向同性双压电板Ⅲ型界面裂纹力学分析

韩贵花，张雪霞，解海玲，赵文彬，王 慧(144)

玻璃钢锚环承载性能的有限元分析

刘建月，崔小朝，刘伟婧，郑亚东(149)

装载过程中提升钢丝绳的纵向振动特性

王 则，赵子龙，杨晓辉，田雪坤(155)

标准算子代数上完全保立方零元的可加映射

刘艳晓，路召飞，吴增良，黄 丽(159)

第37卷 第3期(总第155期)

计算机科学与信息工程

一种改进的自适应卡尔曼滤波算法

许亚朝，何秋生，王少江，成 熊(163)

改进的SLIC超像素彩色图像分割方法

裴高阳，张荣国，胡 静，刘小君(168)

商业管理云平台研究与设计

张少波，刘春霞，白尚旺，陈俊志，白少云(176)

蔡氏对偶电路的建模及仿真研究

尚广超，潘 峰(181)

机械工程与材料科学

机车微机控制系统架构设计

姚 欢，齐向东(186)

基于相关差分振子阵列的煤矿电机故障诊断研究

李静雅，魏 红 (191)

感应电动机调速系统的二自由度免疫内模控制

张李静，邵雪卷，陈志梅，刘 通(196)

综合目标函数的构造对多目标优化过程的影响

陶元芳，冯志远，刘亚倩(201)

镀液成分对Fe-Co-W薄膜结构和磁性能的影响

朱乾科，赵 越，武雅璐，王世醒，张克维(207)

FCC晶体中孔洞的聚合行为研究

安红萍，孟诗茹(212)

柔性支承下风力机低速轴轴承疲劳寿命分析

姜改革，殷玉枫，那亚莉，司世雄，高崇仁(217)

基于Matlab的磁测量实验数据处理方法研究

刘文峰，张敏刚，李 蒙(224)

城市高架桥健康监测方案设计

苏家仲，贾志绚，黄小芳(229)

应用科学

带阻尼项的坏的Bq方程的精确解

范 凯，靳琴琴(234)

织物芯增强轻型输送带的固有特性分析

王 伟，梁清香，张 钊(238)

某隧道在不同侧压系数条件下的FLAC3D数值分析

曹日跃(243)

关于At(t≤3)群的LA猜想

白 颉，张慧玲(247)

第37卷 第4期(总第156期)

计算机科学与信息工程

基于无功开环的SVG控制方法研究

许敏敏，韩如成，渠爱霞(251)

一种IGBT短路保护驱动电路的优化

赵晓博，刘立群，翟晓宇，吴祥辉，刘 晓(256)

一种基于Hpwm-Lpwm的BLDCM转子位置估算方法

马金猛，文新宇(260)

融合RTS平滑的迭代无迹卡尔曼粒子滤波方法

李 敏，陈志梅，邵雪卷(266)

基于角色访问控制的约束模型研究

白少云，白尚旺，张少波(270)

柔性直流输电控制策略研究

李武雄，李 虹，刘立群(276)

智能变电站中的GOOSE虚端子的设计方法

吕相沅，赵志诚，张红莲，闫崇阳(281)

机械工程与材料科学

基于可能度的风险评价方法研究

谢 涛，范 英，胡 琴，乔建璐，荆 华，甄 珍(286)

不对称刚性转子-轴承系统的非线性动力学行为

郑美茹，黑 棣(291)

基于道路因素的交通安全模糊综合评价的研究

程劲钊，栗振锋，任丽超，翟文卿(296)

全液压矫直机位置闭环和力闭环转换策略研究

和东平，韩贺永，黄庆学，王 君，张晓民，李 佳(302)

凝结水节流调节特性分析

郭 磊，刘苹稷，曾德良，秦 昊(307)

桥式起重机运行数据快速处理方法

穆广金，高崇仁，何洋洋，付大伟(313)

电磁阀连续可变阻尼减振器的建模与仿真

胡 琴，晋民杰，范 英，乔建璐，荆 华(317)

2，2-二(3-硝基-4-羟基苯基)六氟丙烷的合成

王潇潇，刘振民，李 鹏，王润平，毛树红，段秀琴，谢 峰(323)

应用科学

基于CFD的管道流动局部水头损失系数的数值计算

张俊婷，杜秀丽，徐 磊(328)

短补偿臂“Z”形供热直埋弯管的应力分析

梁 鹂(332)

第37卷 第5期(总第157期)

计算机科学与信息工程

桥式起重机的二自由度内模防摆控制研究

王小静，陈志梅，邵雪卷(337)

模块化多电平换流器子模块均压方法

渠爱霞，韩如成，许敏敏(342)

基于影响空间的初始中心点优化K-means聚类算法

赵文冲，蔡江辉，张继福(347)

四旋翼飞行器极点配置姿态控制器设计

肖 勇,孙志毅(354)

基于网格单元和P权值的离群数据挖掘方法

冯婷婷，张继福(359)

单相光伏并网逆变器直流注入抑制策略

马亚勇，于少娟(365)

机械工程与材料科学

锰矿粉添加陶粒支撑剂的制备与物理性能研究

周 毅，冯 荣，黄燕平，徐兴堂，陈 前，杜丽丽(370)

MgH2反应法制备Mg2(Sn,Si)基热电材料及性能研究

韩永辉，张永忠，陈少平，孟庆森(374)

轧辊随机磨损模型及其最优更换策略研究

张 炯，张晓红，曾建潮，赵 静(379)

带式输送机驱动装置机械结构的可靠性分析

董 茜，韩 刚，解 鑫(385)

基于改进BP神经网络的运输企业安全评价研究

曹引弟，李 捷，贾志绚(389)

基于ANSYS的恒幅载荷下桥式起重机疲劳寿命模拟

周雨芬,周利东,朱 瑞,王 雷(395)

磁流体油膜轴承油的粘度特性研究

姜宏伟，张亚南,王建梅,左正平,张艳娟(400)

应用科学

一种求解二次模型信赖域子问题的Admas4隐式算法

王英慧，王希云(406)

外电场对H2O分子在FeN3-G催化剂上吸附的影响

刘利娟，张 静，刘 雯(412)

第37卷 第6期(总第158期)

计算机科学与信息工程

三自由度抓取机械手臂的复合模糊PID控制

王成宝，于少娟, 皇甫宇杰,祁晓阳(419)

双向DC-DC不间断电源管理系统的设计

王家麒,闫晓梅,侯宁波, 杜庆潮，贾尧尧，武宏兵(424)

一种基于K-means的关联规则聚类算法

王 琢，荀亚玲，张继福(429)

基于Voronoi算法的无线多媒体传感器网络覆盖控制研究

霍海平，曾建潮，赵 静(438)

基于PID控制风板装置的设计与实现

张 扬(443)

跷跷板系统的模糊控制策略研究

张 卓， 张井岗(447)

机械工程与材料科学

带式输送机传动滚筒轴的弯扭组合分析

李海伟，韩 刚(453)

叉车液力传动与机械传动的对比设计

刘亚倩，陶元芳，冯志远(457)

轧辊维修策略与备件库存联合优化研究

高 坤，张晓红，曾建潮 (462)

汽车起重机支腿液压系统的可靠性分析

罗 曦，高崇仁(468)

油膜轴承启/制动阶段的温度特性研究

姜宏伟，李璞，王建梅，孟凡宁(475)

某400型随车起重机特性分析

晋民杰，胡 琴，范 英，乔建璐，荆 华(480)

应用科学

基于均匀化理论的两种网孔材料力学性能的比较

郑亚东，崔小朝，晋艳娟，张 柱(486)

结合模式搜索法的混合MIMIC算法

张 丹,夏桂梅(490)

平面问题各向同性弹性非线性本构方程

王海任，李 忱，苗亚男，赵 丽(495)

《太原科技大学学报》2016年总目次

(500)

·卷终·

Vol.37 No.1 (Sum No.153)

Computer Science and Information Engineering

A Generation Method of Visual Words Based on Rough Set

ZHAO Peng-kun，SHI Kai-ze，ZHANG Su-lan(01)

Hybrid Search Algorithm on Particle Swarm Optimization and Levy Flight

NIU Hai-fan，SONG Wei-ping，NING Ai-ping(06)

Fractional-order Sliding Mode Position and Anti-swing Control of Tower Crane

CHEN Zhi-mei，SUN Hui，ZHANG Jing-gang，SHAO Xue-juan(12)

Application of Improved Ant Colony Algorithm in Software Defect Prediction Model

YANG Ze-hui，LI Lin，QIAO Bing-qin(17)

Research on Key Technologies of IGBT in VSC-HVDC

LUO Ming-hao，SUN Zhi-yi，LIU Li-qun(22)

Heliostat Tracking System Design for Large-array Type Solar Thermal Power Generation

TIAN Xing，LIU Li-qun，GE Zhu，CAO Wei，ZHANG Guo-liang(27)

Design on Wireless Power Transmission System Based on Magnetic Resonance

CHEN Wei，SUN Zhi-yi，LIU Li-qun(32)

Vibration Analysis and Research of Vibrating Screen Hanging Wire Rope

LIU Hong-qian，LI Yong-kang(36)

Mechamical Engineering and Materials Science

Research on Stress Relaxation Characteristics of BabbittMetal ZChSnSb11-6 Based on Creep Test

MIAO Ke-jun，WANG Jian-mei，LI Pu，XU Jun-liang，ZHANG Xiao-tian，ZHANG Ya-nan(39)

A New Method of Solving Multi-attribute Decision-making Problems

JIN Min-jie，XIE Tao，WANG Kuai，Fan Ying，HAN Fei(45)

Parametric Design of Double Circular Arc Gear Based on Pro/E and Virtual Assembly Simulation Motion

JI Bin，WANG Chun-yan，LU Li-juan，SUN Tian-hua(50)

Research on Time-consuming Model of City Bus

HAN Zhi-qiang，SONG Cheng，JIA Zhi-xuan，LIU Jian-lin，SHEN Zeguo，LI Xiao-nan(53)

Research on a New Model in Bridge Engineering Risk Assessment Based on the Modified AHP Algorithm

REN Li-chao，LI Zhen-feng，XING Ji-Xing，CHENG Jin-zhao，ZHAI Wen-qing，HAN Fei(59)

Influence of Time-acculumation Effect on Viscosity Performance for Oil-Film Bearing Oil

ZHANG Ya-nan ，WANG Jian-mei，ZHANG Yan-juan，ZHANG Xiao-tian(64)

Applied Science

Research on PAN-based Carbon Fiber Plated Nickel and High-temperature Mechanical Properties

JIN Yan-juan，YANG Kun，LI Sheng-jing，ZHANG Zhu，YANG Xue-xia(68)

Adams′s Algorithm for Solving Trust-region Subproblems with Quadratic Model

WANG Ying-hui，WANG Xi-yun(72)

Homogenization Predication of Equivalent Elastic Modulus for Perforated Plates and Experimental Research

YANG Kun，JIN Yan-juan，LI Sheng-jing，CUI Xiao-chao(77)

Vol.37 No.2 (Sum No.154)

Computer Science and Information Engineering

Online Prediction for Equipment Residual Life Based on Grey Neural Network

SHI Hua-jie，XUE Song-dong(81)

Stability Analysis of Networked Control Systems Based on Switching System Processing Methods

WEI Yu，SUN Zhi-yi(87)

Design of Power Quality Monitoring Platform Based On LabVIEW

LIU Yong-ping，ZHANG Jing-gang，ZHAO Zhi-cheng，LUO Wen-juan(92)

The Composite Controller Design of Large Transformer Lifting Device

YANG Chen，YU Shao-juan(98)

A Method of Extracting the Feature Points of Microscope Images

ZAHNG Yun-lei，FAN Sheng-li，WANG Yi-gang(103)

The Application of Bi-directional DC/DC Converter in Micro DC-Grid

LIU Xiao，LIU Li-qun，WU Xiang-hui，ZHAO Xiao-bo(108)

Mechamical Engineering and Materials Science

Research on an Improved PNGV Model of Lithium Battery

WANG Shao-jiang，HE Qiu-sheng，XU Ya-zhao，CHENG Xiong(114)

Numerical Analysis and Experimental Research on Operating Stability of Wire Rod Mill Bearing

CAI Min，WANG Jian-mei，ZHANG Ya-nan，ZHANG Yan-juan，JI Hong-bin(119)

Simulation Calculation and Analysis of Axle Load for Nine-Shaft All Terrain Crane

QIN Yao-dong，ZHANG Xi-qing(125)

Design and Analysis on Oblique Blade for Reinforcing Steel Cutting Machine

ZHANG Yu，XIAO Qiang(130)

Applied Science

Analysis on Buried Pipeline Settlement Deformation over the Mined-out Areas

YANG Xiao-hui，ZHAO Zi-long，LI Chen，ZHANG Yong-sheng，GENG Jia(134)

Numerical Study on Damage Detection Based on Phase Trajectory of Dynamic Responses of Bridge Structure

ZHANG Lei，ZHANG Wei-wei(140)

Stress Field Analysis Near the Interface Crack Tip for Mode Ⅲ of Transverse Isotropic Dual Piezoelectric Materials

HAN Gui-hua，ZHANG Xue-xia，XIE Hai-ling，ZHAO Wen-bin，WANG Hui(144)

Finite Element Analysis of Bearing Capacity of Glass Fiber Reinforced Plastics Anchor Ring

LIU Jian-yue，CUI Xiao-chao，LIU Wei-jing，ZHENG Ya-dong(149)

Analysis of Longitudinal Vibration of Wire Rope During Loading Process

WANG Ze，ZHAO Zi-long，YANG Xiao-hui，TIAN Xue-kun(155)

Additive Maps Completely Preserving Cube-zero Operators on Standard Operator Algebras

LIU Yan-xiao，LU Zhao-fei，WU Zeng-Liang ，HUANG Li(159)

Vol.37 No.3 (Sum No.155)

Computer Science and Information Engineering

An Improved Adaptive Kalman Filtering Algorithm

XU Ya-zhao，HE Qiu-sheng，WANG Shao-jiang，CHENG Xiong(163)

Improved SLIC Superpixel Color Image Segmentation Method

PEI Gao-yang，ZHANG Rong-guo，Hu Jing，LIU Xiao-jun(168)

Esign of Business Management Cloud Platform

ZHANG Shao-bo，LIU Chun-xia，BAI Shang-wang，CHENG Jun-zhi，BAI Shao-yun(176)

Modeling of Chua′s Dual Circuit and Simulation

SHANG Guang-chao，PAN Feng(181)

Mechamical Engineering and Materials Science

Architecture Design of Locomotive Microcomputer Control System

YAO Huan，QI Xiang-dong(186)

Study of Fault Diagnosis on Coal Mine Motor Based on Correlation Differential Resonator Array

LI Jing-ya，WEI Hong(191)

Two-degree-of-freedom Immune IMC in AC Speed Regulating System

ZHANG Li-jing，SHAO Xue-juan，CHEN Zhi-mei，LIU Tong(196)

The Effect of Construction of Multi-objective Function on the Process of Optimization

TAO Yuan-fang，FENG Zhi-yuan，LIU Ya-qian(201)

Effect of Solution Contents on Structure and Magnetic Properties of Fe-Co-W Film

ZHU Qian-ke，ZHAO Yue，WU Ya-lu，WANG Shi-xing，ZHANG Ke-wei(207)

Research on Void Coalescence Behavior in FCC Single Crystal

AN Hong-ping，MENG Shi-ru(212)

Fatigue Life Analysis for Low-speed Shaft Bearing of Wind Turbine with Flexible Support

JIANG Gai-ge，YIN Yu-feng，NA Ya-li，SI shi-xiong，GAO Chong-ren(217)

Research on Magnetic Measurement Data Processing Method Based on Mtlab

LIU Wen-feng，ZHANG Min-gang，LI Meng(224)

Scheme Design of Health Monitoring for City Viaduct

SU Jia-zhong，JIA Zhi-xuan，HUANG Xiao-fang(229)

Applied Science

Exact Solutions for Bad Boussinesq Equation with Damping Term

FAN Kai，JIN Qin-qin(234)

Inherent Characteristics Analysis of Fabric Core Reinforced Light Conveyor Belt

WANG wei，LIANG Qing-xiang，ZHANG zhao(238)

Analysis of FLAC3D Simulation of Tunnel Under Different Lateral Pressure Coefficients

CAO Ri-yue(243)

TheLA-conjecture of At(t≤3)-groups

BAI Jie，ZHANG Hui-ling(247)

Vol.37 No.4 (Sum No.156)

Computer Science and Information Engineering

Research on SVG Control Method Based on Open Loop Reactive Power

XU Min-min，HAN Ru-cheng，QU Ai-xia(251)

Improvement of Short-Circuiting Protective Circuit and Driving Circuit for IGBT

ZHAO Xiao-bo，LIU Li-qun，ZHAI Xiao-yu,WU Xiang-hui，LIU Xiao(256)

A Method of BLDCM Rotor Position Estimation Based on Hpwm - Lpwm

MA Jin-meng，WEN Xin-yu(260)

Iterated Unscented Kalman Particle Filter of Fusion RTS Smoothing

LI Min，CHEN Zhi-mei，SHAO Xue-juan(266)

Survey on Module of Constraint in Role-based Access Control

BAI Shao-yun，BAI Shang-wang，ZHANG Shao-bo(270)

Control Strategy of VSC-HVDC

LI Wu-xiong，LI Hong，LIU Li-qun(276)

Design Method for GOOSE Virtual Terminal in Intelligent Substation

LU Xiang-yuan，ZHAO Zhi-cheng，ZHANG Hong-lian，YAN Chong-yang(281)

Mechamical Engineering and Materials Science

Research on Risk Evaluation Method Based on Possibility

XIE Tao，FAN Ying，HU Qin，QIAO Jian-lu，JING Hua，ZHEN Zhen(286)

Nonlinear Dynamic Behaviors of Unsymmetrical Rigid Rotor-Bearing System

ZHENG Mei-ru，HEI Di(291)

Research of Traffic Safety Fuzzy Comprehensive Evaluation Based on Road Factors

CHENG Jin-zhao，LI Zhen-feng，REN Li-chao，ZHAI Wen-qing (296)

Research on Transfer Strategy of Position Closed Loop and Force Closed Loop Transformation For Full-hydraulic Leveler

HE Dond-ping，HAN He-yong，HUANG Qing-xue，WANG Jun，ZHANG Xiao-min，LI Jia(302)

Characteristic Analysis of Condensate Throttling Adjustment System

GUO Lei，LIU Ping-ji，ZENG De-liang，Qin Hao(307)

Research on Quick Processing Methods of Operating Data of Bridge Crane

MU Guang-jin，GAO Chong-ren，HE Yang-yang，FU Da-wei(313)

Modeling and Simulation of Continuous Variable Damping Shock Absorber for Solenoid Valve

HU Qin，JIN Min-Jie，FAN Ying，QIAO Jian-Lu，JING Hua(317)

Study on Synthesis of 2，2-bis(3- nitro -4-hydroxyphenyl)Hexafluoropropane

WANG Xiao-xiao，LIU Zhen-min， LI Peng，WANG Run-ping，MAO Shu-hong，

DUAN Xiu-qin，WANG Yan，XIE Feng(323)

Applied Science

Numerical Calculation of Local Head Loss Factor on Pipe Flow Based on CFD

ZHANG Jun-ting，DU Xiu-li，XU Lei(328)

Stress Analysis of Z-shape Elbow with Short Compensated Arm in Directly Buried Heat-supply Pipeline

LIANG Li(332)

Vol.37 No.5 (Sum No.157)

Computer Science and Information Engineering

Research of Two-Degree-of-Freedom IMC Anti-swing Control for Bridge Crane

WANG Xiao-jing，CHEN Zhi-mei，SHAO Xue-juan(337)

Method for Balancing Sub-module Voltage in Modular Multi-level Converters

QU Ai-xia，HAN Ru-cheng，XU Min-min(342)

An OptimizationK-means Clustering Algorithm of Initial Center Objects Based on Influence Space

ZHAO Wen-chong, CAI Jiang-hui, ZHANG Ji-fu(347)

Pole Placement Controller Design for Quadrotor Attitude

XIAO Yong, SUN Zhi-yi(354)

AnOutlier Data Mining Method of Grid Cell-Based and P weights

FENG Ting-ting，ZHANG Ji-fu(359)

Computer Science and Information Engineering

DC Injection Control Strategy for Non-isolated Single-phase PV Grid-connected Inverters

MA Ya-yong，YU Shao-juan(365)

Mechamical Engineering and Materials Science

Preparation andPhysical Properties of the Ceramic Proppants with Manganese Mineral Powder Addition

ZHOU Yi, FENG Rong, HUANG Yan-ping, XU Xin-tang, CHEN Qing, DU Li-li(370)

Preparation and Performance ofMg2(Sn,Si)-based Thermoelectric Materials by MgH2Reaction Method

HAN Yong-hui, ZHANG Yong-zhong, CHEN Shao-ping, MENG Qing-sen(374)

Research on Stochastic Wear Model of Roller and Its Optimal Replacement Policy

ZHANG Jiong，ZHANG Xiao-hong，ZENG Jian-chao，ZHAO Jing(379)

Reliability Analysis of Mechanical Structure of Belt Conveyor Driver

DONG Qian，HAN Gang，XIE Xin(385)

A Safety Assessment Model For Transportation Enterprise Based on Improved BP Neural Network

CAO Yin-di，LI Jie，JIA Zhi-xuan(389)

Simulation of Bridge Crane Fatigue Life Under Constant Amplitude Load Based on ANSYS

ZHOU Yu-fen, ZHOU Li-dong, ZHU Rui, WANG Lei(395)

Research and Analysis of Viscosity Properties for Magnetic-fluid-lubrication Oil-film Bearing Oil

JIANG Hong-wei, ZHANG Ya-nan, WANG Jian-mei, ZUO Zheng-ping, ZHANG Yan-juan (400)

Applied Science

An implied Adams4′s Algorithm for Solving Trust-region Subproblems with Quadratic Model

WANG Ying-hui，WANG Xi-yun(406)

Adsorption of H2O Molecule on the Surface of FeN3-G Under an External Electric Field

LIU Li-juan, ZHANG Jing, LIU Wen(412)

Vol.37 No.6 (Sum No.158)

Computer Science and Information Engineering

Compound Fuzzy-PID Controller of Robotic Grab Arm with Three Degrees of Freedom

WANG Cheng-bao, YU Shao-juan , HUANGFU Yu-jie, QI Xiao-yang(419)

Design of Two-way DC-DC Uninterruptable Power Management System

WANG Jia-lu, YAN Xiao-mei, HOU Ning-bo,DU Qing-chao, JIA Yao-yao, WU Hong-bing(424)

An Association Rule Clustering Algorithm Based on K-means

WANG Zhuo, XUN Ya-ling, ZHANG Ji-fu(429)

Research on Coverage in Wireless Multimedia Senor Networks Based on Voronoi Algorithm

HUO Hai-ping, ZENG Jian-chao, ZHAO Jing(438)

PID Control Deflector Means of Design and Implementation

ZHANG Yang(443)

A Fuzzy Control Method for Seesaw System

ZHANG Zhuo, ZHANG Jing-gang(447)

Computer Science and Information Engineering

Bending and Torsion Analysis of the Driving Pulley Shaft in Belt Conveyor

LI Hai-wei, HAN Gang(453)

ComparisonDesign of Hydraulic Transmission and Mechanical Transmission of Forklift Truck

TAO Yuan-fang, LIU Ya-qian, FENG Zhi-yuan(457)

The Joint Optimization Strategies of Rollers Maintenance Policy and Spare Parts Provisioning Policy

GAO Kun, ZHANG Xiao-hong, ZENG Jian-chao(462)

TheReliability Analysis of Hydraulic System of Truck Crane Outrigger

LUO Xi, GAO Chong-ren(468)

Research on Temperature Property of Oil-film Bearing at Start/stop Phase

JIANG Hong-wei, LI Pu, WANG Jian-mei, MENG Fan-ming(475)

Analysis on theCharacteristics of a 400-type Vehicle Crane

JIN Min-Jie, HU Qin, FAN Ying, QIAO Jian-Lu, JING Hua(480)

Mechamical Engineering and Materials Science

Comparison of Elastic Property of Two Kinds of Mesh Materials Based on Homogenization Theory

ZHENG Ya-dong, CUI Xiao-chao, JIN Yan-juan, ZHANG Zhu(486)

A Hybrid MIMIC Algorithm Combined with Pattern Search Algorithm

ZHANG Dan, XIA Gui-Mei(490)

TheIsotropic Non-linear Elastic Constitutive Equations of Plane Problem

WANG Hai-Ren, LI Chen, MIAO Ya-Nan, ZHAO Li(495)

·End·