CHINESE JOURNAL OF AERONAUTICS
Special Topic:Swarm Control of UAVs
- A distributed approach for lidar-based relative state estimation of multi-UAV in GPS-denied environments
- Robust leaderless time-varying formation control for unmanned aerial vehicle swarm system with Lipschitz nonlinear dynamics and directed switching topologies
- A review on fault-tolerant cooperative control of multiple unmanned aerial vehicles
- A multi-strategy pigeon-inspired optimization approach to active disturbance rejection control parameters tuning for vertical take-off and landing fixed-wing UAV
- Semi-global leader-following consensus-based formation flight of unmanned aerial vehicles
- Distributed bearing-based formation control of unmanned aerial vehicle swarm via global orientation estimation
- Robust formation control for missiles with obstacle avoidance
- Mission-oriented cooperative 3D path planning for modular solar-powered aircraft with energy optimization
- Resilience optimization for multi-UAV formation reconfiguration via enhanced pigeon-inspired optimization
- Distributed coordinated control scheme of UAV swarm based on heterogeneous roles
- Structured sparsity assisted online convolution sparse coding and its application on weak signature detection
- Guide for Authors
- Special Topic:Swarm Control of UAVs
- Effects of sintering temperature and time on defect evolution and compression properties of Ti-Al3Ti laminated composites
- Synthesis and characterization of geopolymer from lunar regolith simulant based on natural volcanic scoria
- Standing wave drift of hemispherical resonator with quality factor non-uniformity under a ring electrode excitation
- Thermal management for thermoset automated fiber placement based on infrared heater structure arrangement
- Modal analysis strategy and nonlinear dynamic characteristics of complicated aero-engine dual-rotor system with rub-impact
- Vibration signal-based chatter identification for milling of thin-walled structure
- Virtual flight test techniques to predict a blended-wing-body aircraft in-flight departure characteristics
- An orientation-dependent creep life evaluation method for nickel-based single crystal superalloys
- Adaptive sensitive frequency band selection for VMD to identify defective components of an axial piston pump
- Initial corrosion behavior and mechanism of 7B04 aluminum alloy under acid immersion and salt spray environments
- Heat transfer behaviors of some supercritical fluids: A review
- Experimental investigation on ice-breaking performance of a novel plasma striker
- Theories and methods for designing hypersonic high-enthalpy flow nozzles
- A novel inflatable rings supported design and buoyancy-weight balance deformation analysis of stratosphere airships
- Synchronous chirp mode extraction: A promising tool for fault diagnosis of rolling element bearings under varying speed conditions
- Study on the lift and propulsive force shares to improve the flight performance of a compound helicopter
- Cutting force and specific energy for rotary ultrasonic drilling based on kinematics analysis of vibration effectiveness
- Optimal location and shape definition of elliptical ventilation openings on aero engine turbine rotors with stress concentration effect
- Research progress on solid-fueled Scramjet
- A new adaptive Kalman filter for navigation systems of carrier-based aircraft
- Blind identification of space-time block codes based on deep learning
- High-precision shape approximation low-thrust trajectory optimization method satisfying bi-objective index
- Trajectory prediction of ballistic missiles using Gaussian process error model
- A generative deep learning framework for airfoil flow field prediction with sparse data
- Effects of punch size,magnetic field,and magnetorheological elastomers medium on forming T-shaped thin-walled Inconel 718 tubes