《火炸药学报》2022年总目次

题 目作者卷(期)页

议论火炸药数字化制造

肖忠良 45 (1) ⅰ

墨水直写增材制造技术及其在含能材料领域的研究进展

姜一帆，赵凤起，李 辉，张 明，蒋周峰，侯晓婷，张建侃，李 娜，戴亚堂 45 (1) 1

1，1′-二羟基-5，5′-联四唑二羟胺盐在火炸药中的应用研究进展

张 坤，王 健，王晓峰，冯晓军 45 (1) 20

5，5′-二硝基-3，3′-联(1，2，4-三唑)草酰肼双阳离子盐的合成、表征与性能预估

周飞飞，侯天骄，罗 军 45 (1) 30

High Energy Density Materials based on N4Molecules: Synthesis Routes from First-principles Calculations

MAO Yu-ting, SUN Chu-li, DU Hui-fang, GUO Wei 45 (1) 36

超重力辅助溶剂-反溶剂重结晶法制备亚微米级RDX

曹少博，周林裕，张亮亮，陈建峰 45 (1) 46

富勒烯对甲基苯胺衍生物的合成及其对硝化棉安定性的影响

熊 杰，金致远，余雪梅，金 波，彭汝芳 45 (1) 53

静电喷雾法制备TKX-50/Al/GAP含能微单元及其性能研究

叶宝云，冯宸赫，安崇伟，王晶禹，赵凤起，赵嘉静 45 (1) 60

GAP/PET嵌段型热塑性聚氨酯弹性体的低温力学性能

徐明辉，杨伟涛，卢先明，莫洪昌，葛忠学 45 (1) 67

线内非同步起爆对战斗部毁伤效能的影响

张树凯，王科伟，谢佳良，李晓刚，张浩宇，程 立 45 (1) 73

HTPB/增塑剂表面自由能研究

牛国涛，南 海，牛余雷 45 (1) 81

DFTNAN/B的热分解行为及相容性

朱 煜，王建华，刘玉存，荆苏明，翟思源，温 旭 45 (1) 85

振动作用对现场混装乳化炸药稳定性的影响

魏 国，刘 锋，吴攀宇，王锡东 45 (1) 90

CL-20/CMDB推进剂的宽温力学临界转变特性

胡义文，王江宁，张 军，袁志锋，陈俊波，陈太俊，宋秀铎，裴江峰，耿超辉 45 (1) 97

EPDM包覆层注射成型模拟及工艺参数研究

刘奔奔，张 慧，李军强，陈国辉，杨士山，彭 炯，何吉宇，李向梅，杨荣杰 45 (1) 103

典型高能硝胺发射药的摩擦静电起电特性

石先锐，许灿啟，贾永杰，李小东 45 (1) 109

基于人工神经网络算法的发射药钝感剂浓度分布快速预测技术

苟永亮，刘 波，李梓超，魏 伦，马方生，姚月娟，于慧芳，李 强 45 (1) 115

氧化石墨烯对RDX/PMMA安全性能及力学性能影响

侯聪花，张 鑫，马静静，张诗敏，吴 楠，李泽睿，杜宇星 45 (1) 120

BFFO的热安全性和凝固特性

巨荣辉，罗一鸣，王 浩，蒋秋黎，张蒙蒙，杨 斐，翟连杰，王锡杰 45 (1) 126

“双碳”背景下含能材料的可持续发展

王晶禹 45 (2) ⅰ

含能材料增材制造技术的研究现状与展望

肖 磊，郝嘎子，郭 锐，柯 香，张光普，胡玉冰，周 昊，王苏炜，姜 炜 45 (2) 133

典型含能钝感增塑剂在固体推进剂中的应用研究进展

袁志锋，胡松启，刘林林，赵凤起 45 (2) 154

Use of Hydrazine and Its Substitutes as Fuel

A.A.Boryaev 45 (2) 164

3，4-二氨基呋咱合成及其含能衍生物研究进展

折巍青，翟连杰，李建康，黄 洁，王伯周 45 (2) 179

二硝酰胺铵晶体表面结构与性质分析

胡冬冬，陈鑫健，汪营磊，周智勇，张 帆，任钟旗 45 (2) 193

李陶琦，丁可伟，刘红利，卜建华，杨 斌，刘 卫，葛忠学 45 (2) 200

PYX在DMSO中的结晶热力学

罗 西，常 海，刘红妮，周文静，栾洁玉，邓明哲 45 (2) 205

3，3′-二氨基-4，4′-氧化偶氮呋咱在七种溶剂体系中的结晶形貌预测

叶宝云，范家珂，安崇伟，王晶禹，赵凤起，秦 钊 45 (2) 212

Mg-Al合金在空气中燃烧时Mg的优先反应特性及Al的氮化反应机理

谢 晓，朱晨光，赵凤起，仪建华，秦 钊，李海建 45 (2) 222

爆热弹中产物组分演化的计算研究

王中友，李星翰，甘云丹，施逸蕾，刘福生，仲 凯，苏健军 45 (2) 229

成型装药水下大炸高对多层间隔靶的侵彻威力

杨 珊，王树山，王韫泽，桂秋阳，曾 晶，郑灿杰，贾曦雨 45 (2) 243

内相粒径对现场混装乳化炸药非等温热分解特性的影响

吴攀宇，刘 锋，魏 国，李松林，何 祥，陈皓楠 45 (2) 249

HTPB推进剂温度循环冲击试验研究

张晓军，邢鹏涛，朱佳佳，常新龙 45 (2) 257

热熔胶基推进剂的流变性能

唐 刚，罗运军，李霄羽 45 (2) 264

3D打印成型技术制备CL-20基光固化发射药及其性能研究

高宇晨，李曼曼，胡 睿，杨伟涛，张玉成，田德庆 45 (2) 271

淹没空化水射流破碎HTPB工艺多目标优化

周文君，刘 博，张有智，马有志，王煊军 45 (2) 277

《混合炸药及装药专刊》序言

焦清介 45 (3) ⅰ

关于不敏感弹药的几点认识

王晓峰 45 (3) 285

国外CL-20炸药技术发展分析

彭翠枝，赵春柳，毛长勇，王 林，王建波，邵玉玲，柏席峰 45 (3) 290

射频电磁作用下炸药安全性研究进展

杜 斌，姚洪志，赵凤起，赵 团，杨 帆 45 (3) 300

压装型TKX-50基通用爆破炸药设计及安全性研究

王书记，王 迪，刘 平，孙晓乐，王小龙，郭学永 45 (3) 308

加速老化PBX-6炸药的烤燃实验研究

郭 伟，贾路川，王浩旭，曹 威，曹落霞，聂少云，宋清官，高大元 45 (3) 315

过载环境下炸药装药点火过程的数值模拟

高家乐，周 霖，苗飞超，张向荣，李东伟，倪 磊，朱英中，江 涛 45 (3) 323

不同点火条件下DNTF与B炸药的燃烧转爆轰实验研究

罗一鸣，沈 飞，王 辉，张蒙蒙，王煊军 45 (3) 332

PBX模拟炸药的动态力学行为及损伤本构研究

肖有才，洪志雄，蒋海燕，王志军，熊言义，张 宏 45 (3) 339

不同刺激方式下TKX-50的反应性

张 坤，陶 俊，薛乐星，冯 博，潘 文，王金华，冯晓军，王晓峰 45 (3) 348

含亚稳态分子间复合物的炸药装药增材制造

陈永进，孙晓乐，焦清介，任 慧 45 (3) 355

不同装药密度PBX-3炸药的高压声速和状态方程

种 涛，傅 华，李 涛，莫建军，蔡进涛 45 (3) 364

DNP与DNAN基熔铸炸药的性能对比

雷 伟，张蒙蒙，王红星，杨 斐，李秉擘，罗一鸣 45 (3) 370

复合装药密闭空间爆炸能量释放特性

阚润哲，聂建新，刘 正，郭学永，焦清介，朱英中，刘 攀 45 (3) 377

斜侵彻靶板过程中装药损伤的数值模拟

毕 超，郭 翔，屈可朋，沈 飞 45 (3) 383

CL-20基压装炸药结构成型载体的设计及其应用

吴成成，王正宏，李世伟，李胜伟，王 硕，郭学永 45 (3) 388

氟聚物黏结剂对TATB基PBX造型粉可压性的影响

刘鹏华，李云欣，张浩斌，王保民，袁洪魏，黄 忠，孙 杰 45 (3) 396

浇注型PBX炸药的打印成型及其爆炸性能

吴鑫洲，邓玉成，邓 鹏，焦清介，任 慧 45 (3) 404

典型同轴双元装药爆轰波传播特性试验研究

沈 飞，罗一鸣，余文力，王煊军 45 (3) 412

表面活性剂对固黑铝炸药流变性能的影响

张云龙，程王健，李 昆，高立龙，叶宝云，安崇伟 45 (3) 419

不同油相材料对现场混装乳化炸药抗挤压能力的影响

何 祥，刘 锋，陈皓楠，吴攀宇，魏 国 45 (3) 425

航空炸弹装药热安全性的数值模拟及实验验证

冯昌林，袁 德 45 (3) 432

含能材料发展的若干思考

肖 川，宋 浦，张默贺 45 (4) ⅰ

微流控技术在含能材料制备中的应用及其发展趋势

于 瑾，徐司雨，姜菡雨，赵凤起 45 (4) 439

丁羟推进剂高压燃速及其调控方法研究进展

胡松启，韩进朝，刘林林 45 (4) 452

端丙炔酯基环氧乙烷四氢呋喃无规共聚醚的合成与性能研究

刘人天，翟进贤，杨荣杰，宋振坤 45 (4) 466

含能离子盐3-氨基-5-肼基-1，2，4-三唑2，4，6-三硝基-均苯三酚的合成及性能研究

杨真理，张建国，崔立明，张纬经，陆祖嘉，董文帅 45 (4) 472

钙钛矿含能材料DAP-4的制备工艺

张梦瑶，倪德彬，于国强，刘 江，董璐阳 45 (4) 479

热和冲击波耦合作用下CL-20/TNT共晶响应的分子动力学模拟

李 岩，余文力，黄 璜，李 彪 45 (4) 486

双层核壳结构Al/PVDF/MO亚稳态分子间复合物的制备、表征及其热反应特性研究

姜一帆，于宪峰，李 辉，李 娜，张建侃，蒋周峰，张 明，李瑞勤，戴亚堂，赵凤起 45 (4) 494

AP/PDA/Fe2O3复合物的制备及其吸湿性和热分解性能研究

边 圆，杨凌枫，李纯志，毛长勇，伍 波，裴重华 45 (4) 504

水溶性酚醛树脂及包覆方法对RDX热分解的影响

安 静，罗一鸣，巨荣辉，马海霞 45 (4) 513

AlH3与MgH2对高氯酸铵热分解的影响

龙茂豪，崔立明，黄可奇，夏良洪，王彦娜，张同来 45 (4) 522

非相似圆筒内爆膨胀模型设计及试验验证

沈 飞，王 辉，罗一鸣，余文力，王煊军 45 (4) 529

基于FDS与CFD组合的快速烤燃数值模拟

肖 游，智小琦，王 琦 45 (4) 536

A Method to Predict the Thermochemical Behavior of N-butyl zaideethylnitramine (BuAENA) in DMSO

LU Xu，HU Ling-yan，WANG Tao，LI Bao-jun，LIN Xin-bing，LI Lian-qiang，ZHU Yan-long，DING Li，CHANG Hai 45 (4) 544

战斗部壳体破片平均质量与平均穿孔面积的关系

李一鸣，李文彬，韩 伟，张 庆，王晓鸣 45 (4) 549

蒙脱土对丁羟推进剂力学性能和流变性能的影响

赵 越，丁政茂，杨 武，罗运军 45 (4) 555

Bu-NENA基改性双基推进剂的力学性能及安全性能

孙世雄，赵本波，桑 超，程 原，罗运军 45 (4) 561

铁改性多级孔丝光沸石在缩合胺化反应中的应用

赵锋伟，惠 丰，袁 俊，张 前，刘昭铁，刘忠文，吕 剑 45 (4) 567

纤维素甘油醚硝酸酯改善球扁发射药低温内弹道性能的研究

刘燕华，陈春林，杨 琴，张晓志，陈鹏万，邵自强 45 (4) 576

单模块装药点火燃烧过程中端盖破裂形态对药粒散布的影响

杨旭光，余永刚，陈 安 45 (4) 582

液态CO2相变爆炸激发药剂安全性的试验研究

杨海斌，汪旭光，王尹军，郭宝江，张风军，李继红 45 (4) 590

绿色电化学合成含能材料及废水降解新进展

马海霞，李嘉辰 45 (5) ⅰ

含能材料晶体设计方法新进展

刘英哲，曹意林 45 (5) ⅱ

纳米铝热剂的微观模拟研究进展

崔 巍，王亚军，甘 强，冯长根 45 (5) 597

螺压改性双基推进剂压延过程质量及安全控制研究进展

刘 犇，肖 磊，武宗凯，王苏炜，李 铎，刘所恩，赵凤起，姜 炜，宋秀铎，郝嘎子 45 (5) 612

氮氧化富氮骨架的含能材料合成研究进展

郭元盛，吕 玺，李 洋，薛 祺，弥阳丽，崔 伟，南少聪，刘 鹏，张 萌 45 (5) 629

声共振强化HBIW氢解脱苄合成TADB

唐晓飞，张 瑶，廉 鹏，朱军臣，张圣龙，王锡杰，刘 宁，陈 松 45 (5) 639

3-肼基-4-氨基-1，2，4-三唑硝酸盐的合成、表征及工艺优化

王晓军，王霆威，崔立明，胡 勇，张 陆，曹文丽，董文帅，吴金婷，张建国 45 (5) 645

5，5′-肼基双四唑二羟胺盐的合成与性能

刘亚静，刘浩然，葛瑞荣，赵宝东，刘卫孝，高福磊，张 萌 45 (5) 651

冲击波加载下RDX初始反应机理及分解产物光谱特征

牛振威，曾淑琼，唐 梅，葛妮娜，马兆侠 45 (5) 658

聚合氮的超高压制备及性能计算

苏海鹏，刘 影，贾雅婷，丁可伟，尉 涛，刘浩然，葛忠学 45 (5) 666

MeNQ/NQ低共熔物形成的微观机制

廖奕玫，陈伶媛，游 婷，段晓惠 45 (5) 671

GDY/HMX复合含能材料的热分解动力学和机理

赵宁宁，曾见有，姚二岗，安 亭，马海霞，赵凤起 45 (5) 679

乙酸乙酯与ε-CL-20不同晶面的微观作用机制

游 婷，谢五喜，廖奕玫，陈伶媛，段晓惠 45 (5) 688

内相粒径对现场混装乳化炸药热感度的影响

刘 锋，匡 照，吴攀宇，魏 国 45 (5) 697

FOX-7基PBXs喷雾干燥前驱体分散稳定性研究

杨 玥，董子文，孔 松，黄 辉，李小东，王晶禹 45 (5) 703

含不同粒度HMX的PBX(HMX)在AP促进下的热分解及激光点火性能

武文杰，刘 旭，马宇谦，谭 伟，齐秀芳 45 (5) 711

硼/氧化铜延期药线燃烧性能及延期性能研究

宋浩宇，李晨阳，安崇伟，王晶禹 45 (5) 722

克里金模型用于预测聚能射流速度的方法研究

雷婧宇，王利侠，寇鹏飞，薛 标 45 (5) 730

碳纳米管预处理及CuO/CNTs燃烧催化剂的制备

李珊珊，门 爽，魏 莉 45 (5) 735

Static and Dynamic Combustion Performance of 4-Perforated Gun Propellants

LI Zi-chao，YAO Yue-juan，XU Zhen-zhen，YU Hui-fang，GOU Yong-liang，MA Fang-sheng，YAN Wei，WEI Lun，

WANG Feng，LIU Bo，ZHENG Shuang，LI Qiang，LIU Shao-wu，WANG Qiong-lin，WANG Shu 45 (5) 744

专刊序言

秦 钊，赵凤起，郝 宁 45 (6) P1

单原子燃烧催化剂结构和催化机理的先进表征技术

方延延，王功名，曲文刚，赵凤起 45 (6) 749

单颗粒/液滴燃料悬浮燃烧研究进展

李 辉，杨燕京，赵凤起，黄雪峰，李盛姬 45 (6) 761

富勒烯及其衍生物在含能材料领域的应用研究进展

赵 杨，黄 琪，金 波，彭汝芳 45 (6) 770

连续爆轰发动机中的起爆、湮灭、再起爆和稳定全过程的流场演化机制

荣光耀，程 杪，盛兆华，张允祯，刘向阳，王健平 45 (6) 785

Revealing the Thermal Responses of CL-20 Polymorphs by Conformer Transformation and Initial Decomposition Using ReaxFF Molecular Dynamics Simulations

REN Chun-xing，LI Xiao-xia，NIU Shi-yao，QU Wen-gang，GAO Hong-xu 45 (6) 793

基于分子体积法的CHONF高能致爆材料晶体密度的预测

文琳元，何晓凯，师进文，刘英哲，王伯周 45 (6) 807

含RDX的改性双基推进剂燃速智能设计

郭延芝，吴艳玲，赵凤起，宋秀铎，徐司雨，蒲雪梅 45 (6) 814

微流控法制备超细HMX/FOX-7复合物及其性能测试

姜菡雨，王煊军，于 瑾，石锦宇，慕晓刚，徐司雨，赵凤起 45 (6) 821

两种不同晶型N-甲基-2，4，6-三硝基苯甲胺的制备与性能研究

钟 圣，金 波，彭汝芳 45 (6) 827

纳米2，4-二羟基苯甲酸铜的制备及其催化RDX热分解研究

雷若辰，柳宛彤，张 明，金红晓，金顶峰 45 (6) 835

非晶态纳米NiO的制备及其对AP和GAP基推进剂的催化性能

宋远航，曲文刚，赵凤起，牛诗尧，陈 永，徐抗震 45 (6) 841

基于声共振技术的CL-20基共晶材料制备及热解过程研究

李海建，陈 超，张 哲，谢 晓，马 宁，陈 松，金 波，彭汝芳，仪建华 45 (6) 848

十八氢二十硼酸双四甲基铵的点火与燃烧特性

金孟媛，张建侃，罗宇同，秦 钊，赵凤起，郭艳辉 45 (6) 856

硼基复合金属燃料单颗粒点火与燃烧特性

于润田，马曼曼，张 睿，秦 钊，刘 冬 45 (6) 862

微米级单颗粒铝粉加压着火燃烧特性

秦丁益，杨 越，栗 晶，柳朝晖，秦 钊，仪建华 45 (6) 870

GAP-ETPE基高能固体推进剂的蠕变性能

刘 双，张锡铭，张 京，郑梦泽，刘文皓，罗运军 45 (6) 877

NC/Bu-NENA基推进剂性能研究(Ⅰ)：推进剂能量及燃烧性能

袁志锋，胡松启，韩进朝，王 印，王 瑛，胡义文，李 恒，栗 磊，张 军，赵凤起 45 (6) 884

基于LM-GAUSS固体火箭发动机发羽流光场测温方法

李金键，王丙寅，齐 琪，张 彪，许传龙 45 (6) 891

MgH2粉尘爆炸的能量释放特性规律

张 云，赵懿明，许张归，赵凤起，徐司雨，裴 庆，徐 森，焦枫媛，吴星亮，贾宪振，曹卫国 45 (6) 898

Chinese Journal of Explosives and Propellants 2021 Vol.45
Total Contents

Direct Ink Writing Technology for Additive Manufacturing and Its Research Progress in Energetic Materials

JIANG Yi-fan，ZHAO Feng-qi，LI Hui, et al 45 (1) 1

Application and Research Progress of Dihydroxylammonium 5，5′-bistetrazole-1，1′-diolate (TKX-50) in Explosives & Propellants

ZHANG Kun，WANG Jian，WANG Xiao-feng, et al 45 (1) 20

Synthesis，Characterization and Performance Prediction of Oxalohydrazidinium 5，5′-dinitro-3，3′-bi(1，2，4-triazolate)

ZHOU Fei-fei，HOU Tian-jiao，LUO Jun 45 (1) 30

High Energy Density Materials based on N4Molecules: Synthesis Routes from First-principles Calculations

MAO Yu-ting，SUN Chu-li，DU Hui-fang,et al 45 (1) 36

Preparation of Submicron RDX Particles by High-gravity Assisted Solvent-Antisolvent Recrystallization Method

CAO Shao-bo，ZHOU Lin-yu，ZHANG Liang-liang, et al 45 (1) 46

Synthesis of Fullerene p-Methylaniline Derivative and Its Effect on the Stability of Nitrocellulose

XIONG Jie，JIN Zhi-yuan，YU Xue-mei, et al 45 (1) 53

Preparation of TKX-50/Al/GAP Energetic Micro-units by Electrostatic Spraying Method and Its Performance

YE Bao-yun，FENG Chen-he，AN Chong-wei, et al 45 (1) 60

Cryogenic Mechanical Properties of GAP/PET Block Thermoplastic Elastomers

XU Ming-hui，YANG Wei-tao，LU Xian-ming, et al 45 (1) 67

Effect of In-line Asynchronous Initiation on Warhead Damage Efficiency

ZHANG Shu-kai，WANG Ke-wei，XIE Jia-liang, et al 45 (1) 73

Study on the Surface Free Energy of HTPB/Plasticizers

NIU Guo-tao，NAN Hai，NIU Yu-lei 45 (1) 81

Thermal Decomposition Behavior and Compatibility of DFTNAN/B

ZHU Yu，WANG Jian-hua，LIU Yu-cun, et al 45 (1) 85

Influence of Vibration on the Stability of On-site Mixed Emulsion Explosive

WEI Guo，LIU Feng，WU Pan-yu, et al 45 (1) 90

Mechanical Critical Transition Characteristics of CL-20/CMDB Propellants over a Wide Range of Temperature

HU Yi-wen，WANG Jiang-ning，ZAHNG Jun, et al 45 (1) 97

Research on Injection Molding Simulation and Process Parameters of EPDM Coating

LIU Ben-ben，ZHANG Hui，LI Jun-qiang, et al 45 (1) 103

Frictional Static Electricity Characteristics of Typical High Energy Nitramine Gun Propellant

SHI Xian-rui，XU Can-qi，JIA Yong-jie, et al 45 (1) 109

Prediction of Desensitizer Concentration Distribution in Gun Propellant Based on Artificial Neural Network Algorithm

GOU Yong-liang，LIU Bo，LI Zi-chao, et al 45 (1) 115

Effect of Graphene Oxide on Safety Performance and Mechanical Properties of RDX/PMMA

HOU Cong-hua，ZHANG Xin，MA Jing-jing, et al 45 (1) 120

Thermal Safety and Solidification Characteristics of BFFO

JU Rong-hui，LUO Yi-ming，WANG Hao, et al 45 (1) 126

Research Status and Prospect of Additive Manufacturing Technology for Energetic Materials

XIAO Lei，HAO Ga-zi，GUO Rui，et al 45 (2) 133

Research Progress of Typical Energetic Insensitive Plasticisers in Solid Propellant Application

YUAN Zhi-feng，HU Song-qi，LIU Lin-lin，et al 45 (2) 154

Use of Hydrazine and Its Substitutes as Fuel

A.A.Boryaev 45 (2) 164

Research Progress on the Synthesis of 3，4-Diaminofurazan and Its Energetic Derivatives

SHE Wei-qing，ZHAI Lian-jie，LI Jian-kang，et al 45 (2) 179

The Surface Structure and Properties Analysis of Ammonium Dinitramide Crystal

HU Dong-dong，CHEN Xin-jian，WANG Ying-lei，et al 45 (2) 193

LI Tao-qi，DING Ke-wei，LIU Hong-li，et al 45 (2) 200

Crystallization Thermodynamics of PYX in DMSO

LUO Xi，CHANG Hai，LIU Hong-ni，et al 45 (2) 205

Crystal Morphology Prediction of 3，3′-Diamino-4，4′-azofurazan in Seven Solvent Systems

YE Bao-yun，FAN Jia-ke，AN Chong-wei，et al 45 (2) 212

Preferential Reaction Characteristics of Mg and Nitridation Mechanism of Al during the Combustion of Mg-Al Alloy in Air

XIE Xiao，ZHU Chen-guang，ZHAO Feng-qi，et al 45 (2) 222

Study on Thermodynamic Evolution of Detonation Products in the Detonation Bomb Test

WANG Zhong-you，LI Xing-han，GAN Yun-dan，et al 45 (2) 229

Penetration Power of Large Underwater Explosion Height of Shaped Charge to Multi-layer Spacer Target

YANG Shan，WANG Shu-shan，WANG Yun-ze，et al 45 (2) 243

Effect of Particle Size of Internal Phase on Non-Isothermal Thermal Decomposition Characteristics of Field Mixed Emulsion Explosive

WU Pan-yu，LIU Feng，WEI Guo，et al 45 (2) 249

Experimental Study on HTPB Propellant Subjected to Temperature Cycle Impact

ZHANG Xiao-jun，XING Peng-tao，ZHU Jia-jia，et al 45 (2) 257

Rheological Properties of Hot-melt Adhesive-based Propellant

TANG Gang，LUO Yun-jun，LI Xiao-yu 45 (2) 264

3D Printing Technology and Properties of CL-20-based Photocurable Gun Propellants

GAO Yu-chen，LI Man-man，HU Rui，et al 45 (2) 271

Multi-objective Optimization for HTPB Propellant Breaking Process by Submerged Cavitating Water Jet

ZHOU Wen-jun，LIU Bo，ZHANG You-zhi，et al 45 (2) 277

Some Opinions about Insensitive Munitions

WANG Xiao-feng 45 (3) 285

Foreign Development Status of CL-20 Explosive Technology

PENG Cui-zhi，ZHAO Chun-liu，MAO Chang-yong，et al 45 (3) 290

Research Progress of Explosive Safety in the Radiofrequency Electromagnetic Field

DU bin，YAO Hong-zhi，ZHAO Feng-qi，et al 45 (3) 300

Design and Safety Research of TKX-50-based Pressed General Blasting Explosive

WANG Shu-ji，WANG Di，LIU Ping，et al 45 (3) 308

Experimental Research on Cook-off Test of Accelerated Aging PBX-6 Explosive

GUO Wei，JIA Lu-chuan，WANG Hao-xu，et al 45 (3) 315

Numerical Simulation of Ignition Process of Explosive Charge in Overload Environment

GAO Jia-le，ZHOU Lin，MIAO Fei-chao，et al 45 (3) 323

Experimental Study on DDT of DNTF and Composition B Explosives under Different Ignition Conditions

LUO Yi-ming，SHEN Fei，WANG Hui，et al 45 (3) 332

Research on Dynamic Mechanical Behavior and Damage Constitutive Model of PBX Substitute Material

XIAO You-cai，HONG Zhi-xiong，JIANG Hai-yan，et al 45 (3) 339

Reactivity of TKX-50 under Different Stimulation Methods

ZHANG Kun，TAO Jun，XUE Le-xing，et al 45 (3) 348

Additive Manufacturing of Explosive Charges Containing Metastable Intermolecular Complexes

CHEN Yong-jin，SUN Xiao-le，JIAO Qing-jie，et al 45 (3) 355

High-pressure Sound Velocity and Equation of State of PBX-3 Explosives with Different Charge Densities

CHONG Tao，FU Hua，LI Tao，et al 45 (3) 364

Properties Comparison of DNP-based and DNAN-based Melt Cast Explosives

LEI Wei，ZHANG Meng-meng，WANG Hong-xing，et al 45 (3) 370

Energy Release Characteristics of Composite Charge in Confined Space Explosion

KAN Run-zhe，NIE Jian-xin，LIU Zheng，et al 45 (3) 377

Numerical Simulation of Charge Damage during Oblique Penetration

BI Chao，GUO Xiang，QU Ke-peng，et al 45 (3) 383

Design and Application of CL-20-based Pressed Explosives Structure Forming Carrier

WU Cheng-cheng，WANG Zheng-hong，LI Shi-wei，et al 45 (3) 388

Effect of Fluoropolymer Binder on the Compressibility of TATB-based PBX Molding Powder

LIU Peng-hua，LI Yun-xin，ZHANG Hao-bin，et al 45 (3) 396

Print Forming and Explosive Performance of Castable PBX Explosive

WU Xin-zhou，DENG Yu-cheng，DENG Peng，et al 45 (3) 404

Experimental Study on Propagation Characteristics of Detonation Wave of Typical Coaxial Binary Charges

SHEN Fei，LUO Yi-ming，YU Wen-li，et al 45 (3) 412

Effect of Surfactant on Rheological Properties of the RDX-based Cast Curing Aluminized Explosives

ZHANG Yun-long，CHENG Wang-jian，LI Kun，et al 45 (3) 419

Effect of Different Oil Phase Materials on the Anti-extrusion Ability of On-site Mixed Emulsion Explosive

HE Xiang，LIU Feng，CHEN Hao-nan，et al 45 (3) 425

Numerical Simulation and Experimental Verification on Thermal Safety of Explosive Charge of Aerial Bomb

FENG Chang-lin，YUAN De 45 (3) 432

Application and Development Trend of Microfluidic Technology in Preparation of Energetic Materials

YU Jin，XU Si-yu，JIANG Han-yu，et al 45 (4) 439

Research Progress on High-pressure Burning Rate and Regulation Methods of HTPB Propellants

HU Song-qi，HAN Jin-chao，LIU Lin-lin 45 (4) 452

Synthesis and Performance of Propiolate-terminated Ethylene Oxide-tetrahydrofuran Random Copolyether

LIU Ren-tian，ZHAI Jin-xian，YANG Rong-jie，et al 45 (4) 466

Synthesis and Properties Study of Energetic Ionic Salt 3-Amino-5-hydrazino-1，2，4-triazolium Trinitro-phloroglucinolate

YANG Zhen-li，ZHANG Jian-guo，CUI Li-ming，et al 45 (4) 472

Preparation Technology of Perovskite High-energetic Material DAP-4

ZHANG Meng-yao，NI De-bin，YU Guo-qiang，et al 45 (4) 479

Molecular Reactive Force Field Simulation on the Response of the Co-crystal of CL-20/TNT under the Coupling of Heat and Shock Wave

LI Yan，YU Wen-li，HUANG Huang，et al 45 (4) 486

Preparation，Characterization and Thermal Reactivity of Al/PVDF/MO Metastable Intermolecular Composites with Double Core-shell Structure

JIANG Yi-fan，YU Xian-feng，LI Hui，et al 45 (4) 494

Preparation of AP/PDA/Fe2O3Composite and Its Hygroscopicity and Thermal Decomposition Properties

BIAN Yuan，YANG Ling-feng，LI Chun-zhi，et al 45 (4) 504

Effect of Water Soluble Phenolic Resin and Encapsulation Method on Thermal Decomposition of RDX

AN Jing，LUO Yi-ming，JU Rong-hui，et al 45 (4) 513

Effect of AlH3and MgH2on Thermal Decomposition of Ammonium Perchlorate

LONG Mao-hao，CUI Li-ming，HUANG Ke-qi，et al 45 (4) 522

Design and Experimental Verification of Explosion Expansion Model of the Cylinder with Dissimilar Structure

SHEN Fei，WANG Hui，LUO Yi-ming，et al 45 (4) 529

Numerical Simulation of Fast Cook-off Based on the Combination of FDS and CFD

XIAO You，ZHI Xiao-qi，WANG Qi 45 (4) 536

A Method to Predict the Thermochemical Behavior of N-butyl zaideethylnitramine (BuAENA) in DMSO

LU Xu，HU Ling-yan，WANG Tao，et al 45 (4) 544

Relationship between the Average Mass of Warhead Shell Fragments and the Average Perforation Area

LI Yi-ming，LI Wen-bin，HAN Wei，et al 45 (4) 549

Effect of Montmorillonite on Mechanical and Rheological Properties of HTPB Propellant

ZHAO Yue，DING Zheng-mao，YANG Wu，et al 45 (4) 555

Mechanical Performance and Security Performance of Bu-NENA Based Modified Double-base Propellant

SUN Shi-xiong，ZHAO Ben-bo，SANG Chao，et al 45 (4) 561

Application of Iron Modified Hierarchical Mordenite in the Condensation Amination Reaction

ZHAO Feng-wei，HUI Feng，YUAN Jun，et al 45 (4) 567

Improvement of Internal Ballistic Performance of Oblate Spherical Propellants at Low Temperature by Using Nitrate Glycerol Ether Cellulose

LIU Yan-hua，CHEN Chun-lin，YANG Qin，et al 45 (4) 576

Effect of Rupture Form of End Cover on Grain Dispersion durning Ignition and Combustion of Single Module Charge

YANG Xu-guang，YU Yong-gang，CHEN An 45 (4) 582

Experimental Study on the Safety of Liquid CO2Phase Change Explosive Excitant

YANG Hai-bin，WANG Xu-guang，WANG Yin-jun，et al 45 (4) 590

Research Progress in Microscopic Simulation of Nanothermite

CUI Wei，WANG Ya-jun，GAN Qiang，et al 45 (5) 597

Research Progress on Quality and Safety Control in Calendering Process of Screwed Modified Double-base Propellant

LIU Ben，XIAO Lei，WU Zong-kai，et al 45 (5) 612

Research Progress in the Synthesis of Energetic Materials Based on Nitrogen-rich N-oxide Skeletons

GUO Yuan-sheng，Lü Xi，LI Yang，et al 45 (5) 629

Synthesis of Tetraacetyldibenzylhexaazaisowurtzitane from Hydrodebenzylation of Hexabenzylhexaazaisowurtzitane by Resonance Acoustic Technology

TANG Xiao-fei，ZHANG Yao，LIAN Peng，et al 45 (5) 639

Synthesis，Characterization and Process Optimization of 3-Hydrazino-4-amino-1，2，4-triazole Nitrate

WANG Xiao-jun，WANG Ting-wei，CUI Li-ming，et al 45 (5) 645

Synthesis and Properties of 5，5′-(Hydrazine-1，2-diyl)bis(1H-tetrazole)dihydroxylammonium

LIU Ya-jing，LIU Hao-ran，GE Rui-rong，et al 45 (5) 651

Initial Reaction Mechanism and Spectral Characteristics of RDX Decomposition Products under Shock Loadings

NIU Zhen-wei，ZENG Shu-qiong，TANG Mei，et al 45 (5) 658

Preparation and Performance Calculation of Polymeric Nitrogen under Ultra-high Pressure

SU Hai-peng，LIU Ying，JIA Ya-ting，et al 45 (5) 666

Micro-mechanism of MeNQ/NQ Eutectic Formation

LIAO Yi-mei，CHEN Ling-yuan，YOU Ting，et al 45 (5) 671

Thermal Decomposition Kinetics and Mechanism of GDY/HMX Composite Energetic Materials

ZHAO Ning-ning，ZENG Jian-you，YAO Er-gang，et al 45 (5) 679

Microscopic Interaction Mechanism of Ethylacetate with Crystal Faces of ε-CL-20

YOU Ting，XIE Wu-xi，LIAO Yi-mei，et al 45 (5) 688

Effect of Internal Phase Particle Size on Thermal Sensitivity of On-site Mixed Emulsion Explosive

LIU Feng，KUANG Zhao，WU Pan-yu，et al 45 (5) 697

Study on Dispersion Stability of Spray Drying Precursor of FOX-7 Based PBXs

YANG Yue，DONG Zi-wen，KONG Song，et al 45 (5) 703

Thermal Decomposition and Laser Ignition Properties of PBX(HMX)/AP Composites Containing Different Granularity of HMX

WU Wen-jie，LIU Xu，MA Yu-qian，et al 45 (5) 711

Study on Combustion and Delay Performance of B/CuO Delay Compositions

SONG Hao-yu，LI Chen-yang，AN Chong-wei，et al 45 (5) 722

Study on the Jet Velocity Prediction Method Based on the Kriging Model

LEI Jing-yu，WANG Li-xia，KOU Peng-fei，et al 45 (5) 730

Pretreatment of Carbon Nanotubes and Preparation of CuO/CNTs Combustion Catalyst

LI Shan-shan，MEN Shuang，WEI Li 45 (5) 735

Static and Dynamic Combustion Performance of 4-Perforated Gun Propellants

LI Zi-chao，YAO Yue-juan，XU Zhen-zhen，et al 45 (5) 744

Advanced Characterization Techniques for Unravelling the Structure and Catalytic Mechanism of the Single-atom Combustion Catalysts

FANG Yan-yan，WANG Gong-ming，QU Wen-gang，et al 45 (6) 749

Progress in Combustion of Levitated Single Fuel Particle/Droplet

LI Hui，YANG Yan-jing，ZHAO Feng-qi，et al 45 (6) 761

Review on the Application of Fullerene and Its Derivatives in Energetic Materials

ZHAO Yang，HUANG Qi，JIN Bo，et al 45 (6) 770

Flow Field Evolution Mechanism for the Whole Process of Ignition，Quenching，Reinitiation，and Stabilization in Continuous Detonation Engine

RONG Guang-yao，CHENG Miao，SHENG Zhao-hua，et al 45 (6) 785

Revealing the Thermal Responses of CL-20 Polymorphs by Conformer Transformation and Initial Decomposition Using ReaxFF Molecular Dynamics Simulations

REN Chun-xing，LI Xiao-xia，NIU Shi-yao，et al 45 (6) 793

Prediction of Crystal Density of CHONF High Energetic Explosophoric Materials Based on Molecular Volume Method

WEN Lin-yuan，HE Xiao-kai，SHI Jin-wen，et al 45 (6) 807

Intelligent Design for the Burning Rate of MDB Propellants Containing RDX

GUO Yan-zhi，WU Yan-ling，ZHAO Feng-qi，et al 45 (6) 814

Preparation of Ultrafine HMX/FOX-7 Composites by Microfluidic Technology and Its Performance Tests

JIANG Han-yu，WANG Xuan-jun，YU Jin，et al 45 (6) 821

Preparation and Performance Study of Two Different Crystal Forms ofN-Methyl-2，4，6-trinitromethylamine

ZHONG Sheng，JIN Bo，PENG Ru-fang 45 (6) 827

Preparation of Nano Copper 2，4-Dihyoxybenzoicacid Catalyst and Its Catalytic Performance on the Decomposition of RDX

LEI Ruo-chen，LIU Wan-tong，ZHANG Ming，et al 45 (6) 835

Preparation of Amorphous Nano-NiO and Its Catalytic Performance on AP and GAP Based Propellant

SONG Yuan-hang，QU Wen-gang，ZHAO Feng-qi，et al 45 (6) 841

Preparation and Thermal Decomposition of CL-20-based Cocrystals Using Resonant Acoustic Mixing

LI Hai-jian，CHEN Chao，ZHANG Zhe，et al 45 (6) 848

Ignition and Combustion Characteristics of Tetramethylammonium Octadecahydro-eicosaborate

JIN Meng-yuan，ZHANG Jian-kan，LUO Yu-tong，et al 45 (6) 856

Study on Single Particle Ignition and Combustion Characteristics of Boron-based Composite Metal Fuel

YU Run-tian，MA Man-man，ZHANG Rui，et al 45 (6) 862

Pressurized Ignition and Combustion Characteristics of Micro-Sized Single Aluminum Particle

QIN Ding-yi，YANG Yue，LI Jing，et al 45 (6) 870

Creep Properties of GAP-ETPE-based High-energy Solid Propellant

LIU Shuang，ZHANG Xi-ming，ZHANG Jing，et al 45 (6) 877

Study on Properties of NC/Bu-NENA Based Propellant′s (Ⅰ): Energy and Combustion Properties of Propellant

YUAN Zhi-feng，HU Song-qi，HAN Jin-chao，et al 45 (6) 884

Research on LM-GAUSS Based SRM Plume Temperature Field Test Method

LI Jin-jian，WANG Bin-yin，QI Qi，et al 45 (6) 891

Energy Release Characteristic Law of MgH2Dust Explosion

ZHANG Yun，ZHAO Yi-ming，XU Zhang-gui，et al 45 (6) 898