Fuzzy Logic with Archimedes Optimization Based Biomedical Data Classification Model

Mahmoud Ragaband Diaa Hamed

1Information Technology Department,Faculty of Computing and Information Technology,King Abdulaziz University,Jeddah 21589,Saudi Arabia

2Centre of Artificial Intelligence for Precision Medicines,King Abdulaziz University,Jeddah 21589,Saudi Arabia

3Department of Mathematics,Faculty of Science,Al-Azhar University,Naser City 11884,Cairo,Egypt

4Department of Mineral Resources and Rocks,Faculty of Earth Sciences,King Abdulaziz University,Jeddah 21589,Saudi Arabia

5Geology Department,Faculty of Science,Al-Azhar University,Naser City 11884,Cairo,Egypt

Abstract: Medical data classification becomes a hot research topic in the healthcare sector to aid physicians in the healthcare sector for decision making.Besides,the advances of machine learning (ML) techniques assist to perform the effective classification task.With this motivation,this paper presents a Fuzzy Clustering Approach Based on Breadth-first Search Algorithm(FCA-BFS)with optimal support vector machine(OSVM)model,named FCABFS-OSVM for medical data classification.The proposed FCABFS-OSVM technique intends to classify the healthcare data by the use of clustering and classification models.Besides,the proposed FCABFSOSVM technique involves the design of FCABFS technique to cluster the medical data which helps to boost the classification performance.Moreover,the OSVM model investigates the clustered medical data to perform classification process.Furthermore,Archimedes optimization algorithm(AOA) is utilized to the SVM parameters and boost the medical data classification results.A wide range of simulations takes place to highlight the promising performance of the FCABFS-OSVM technique.Extensive comparison studies reported the enhanced outcomes of the FCABFS-OSVM technique over the recent state of art approaches.

Keywords: Clustering;medical data classification;machine learning;parameter tuning;support vector machines

1 Introduction

Computational intelligent system for medical application is an exciting and important research field.Generally,a medical doctor collects their knowledge from the confirmed diagnoses and patient symptoms[1].In another word,predictive significance of symptoms towards diagnostic and diseases precision of a person are dependent extremely on a physician’s knowledge.Since treatment therapy and medical knowledge rapidly progresses,for example,the accessibility of new drugs and the existence of new diseases,it is difficult for a clinician to possess current development and knowledge in medical settings [2].Alternatively,with the emergence of computing technology,now it is relatively easy to store and acquire lots of data digitally for example in devoted dataset of electronic patient’s record.Intrinsically,the positioning of computerized medicinal decision support system (DSS)becomes a feasible method for helping physicians to accurately and swiftly identify individual patients.Nonetheless,several problems should be resolved beforehand an effective medicinal DSS could be and deployed developed that includes decision making in the existence of imprecision and uncertainty[3].Though medicinal experience and expert knowledge is significant,ranging from measuring a patient’s healthcare status to making diagnoses,advancement in machine learning(ML)methods have paved the way for medicinal practitioner to make use of computational intelligent system for DSS[4].Fig.1 depicts the process in medical image processing.

Figure 1:Different processes involved in medical data processing

Data mining(DM)and ML frequently utilize similar methods and they significantly overlap,but ML method on forecast,on the basis of known property learned from the trained information [5],DM methods concentrate on the detection of previously unknown property within the information.DM method employs ML method,for various purposes;at the same time,ML utilizes DM method as unsupervised learning or as a pre-processing stage to improve performance of the learning model[6].The ML algorithm is developed from the very beginning and utilized for analyzing medicinal datasets.The clustering technique plays a significant role in DM and ML methods.Domestic researcher mostly focusses on the succeeding two characteristics:(a) a clustering model enhances the performance of clustering and (b) a clustering method dynamically determine the amount of cluster centre [7].A dynamic clustering model based genetic algorithm;the key concept of the algorithm is to efficiently resolve the sensitivity of the primary state value clustering,it employed the maximal feature value ranges partitioning strategy and two phases and dynamic selection model in mutation that attain optimum clustering centre.Clustering analysis is a type of unsupervised method in recognition of patterns [8].The clustering task split an unmarked pattern based on some condition into various subsets that need equivalent instances have the more equivalents cluster centre and different instances must be separated in various groups.Thus,it is named unsupervised classification.Clustering analysis was widely employed in image processing,DM,radar target detection,object detection,and so on[9].

This paper presents a Fuzzy Clustering Approach Based on Breadth-first Search Algorithm(FCA-BFS) with optimal support vector machine (OSVM) model,named FCABFS-OSVM for medical data classification.The proposed FCABFS-OSVM technique involves the design of FCABFS technique to cluster the medical data which helps to boost the classification performance.In addition,the OSVM model investigates the clustered medical data to perform classification process.Also,Archimedes optimization algorithm(AOA)is utilized to the SVM parameters and boost the medical data classification results.A wide range of simulations takes place to highlight the promising performance of the FCABFS-OSVM technique.

2 Literature Review

Yelipe et al.[10]introduced an enhanced imputation model named Imputation related class-based clustering(IM-CBC).The experiment is conducted on 9 standard data sets and the recorded outcomes with IM-CBC imputation method are compared with 10 imputation models with C4.5,k-nearest neighbor(KNN),and support vector machine(SVM)classification with fuzzy gaussian similarity and Euclidean distance models.Karlekar et al.[11]proposed an approach for medicinal data classifier with an ontology and whale optimization-related SVM algorithm.At first,privacy-preserved data are designed adapting Kronecker product bat model,later,ontology is constructed for the feature selection(FS)model.Then,optimal SVM and Ontology model is presented by incorporating whale optimization algorithm (WOA) and ontology with SVM,where WOA and ontology are utilized for selecting possible kernel parameters.

Karim et al.[12]present an architecture for medicinal data processing that is developed on the basis of energy spectral density (ESD) and deep autoencoder (AE) models.The main innovation of presented method is to integrate ESD process as feature extractor to a unique deep sparse auto-encoder (DSAE).This enables our presented method for extracting more qualified features in a short computation time than the traditional framework.Le [13]proposes a fuzzy c-means(FCM)clustering interval type-2 cerebellar model articulation neural network(FCM-IT2CMANN)model for helping physicians improve diagnosis performance.The presented approach integrates two classifications,where FCM model is the pre-classification and the IT2CMANN is the initial classification.Implementation of gradient descent model,an adoptive laws to update the presented method is derived.

In Kadam et al.[14],the medical data is reduced dimensionally by the PCA method.The reduction dimensionality information is converted by multiplying with weighting factors,i.e.,enhanced by WOA,to attain maximal distance among the attributes.Consequently,the information is converted into a label-distinguishable plane where the DBN system is adapted for performing the DL method,and the data classification is implemented.

3 The Proposed Model

In this study,a novel FCABFS-OSVM technique has been developed to classify the healthcare data by the use of clustering and classification models.The proposed FCABFS-OSVM technique encompasses different subprocesses such as data pre-processing,FCABFS based clustering,SVM based classification,and AOA based parameter optimization.Fig.2 demonstrates the overall process of FCABFS-OSVM technique.

Figure 2:Architecture of FCABFS-OSVM technique

3.1 Design of FCABFS Technique for Clustering Process

At the initial stage,the FCABFS technique has been developed to group the medical data into distinct clusters.The conventional FCM approach reduces the weighted sum of squares of the distance from each data point to the respective cluster center.But FCM considers each property have a similar effect on clustering,nevertheless of the effect on distinct data properties.Still,the clustering unrelated attributes and sample noise attributes exist.Few data objects in a huge sample might have large impact on clustering results because of separation from another object.But,almost all the clustering models,and feature weighting extension,considers each sample to have an equivalent weight at the time of clustering.Consequently,the process is sensitive to noise.The data object in a huge sample might belong to distinct attributes.Few attribute objects might have a greater influence on clustering results and be named as called data with stronger reparability.In contrast,others might have lower contributions towards clustering results and called noise or isolated data.We employ the variation coefficient to minimize the contribution of noise attributes.

In the presented method,the similarity among objects is defined by presenting an extra weight of the variation coefficient model as follows:

in whichw=(w1,w2,...,wp)T,wk=.wkrepresent the weight of all the attribute factors anddenotes the sample mean,indicates the variation coefficient,msignifies a fuzzy parameter andJshows the loss function,Sx=represent standard deviation[15],Cimplies the number of clusters;andnmeans the number of data.

The Lagrange multiplier model is utilized for finding the solution.The presented FCM alongside the Lagrange function is formulated by

In the early phase of optimization,the succeeding is attained.

Likewise,u12is enhanced by the following equation,

From the abovementioned,the common form of the center upgrading equation is,

Generally,to attainvj,the objective function is extended as

Improving the above objective function gives,

From the abovementioned,the common form of upgrading center is

3.2 Design of Optimal SVM Based Classification Process

Once the medical data has been clustered,they are passed into the SVM model to perform the classification process.Assume that binary classification task:{xi,yi},i=1,...,l,yi∈{-1,1},xi∈Rd,wherexirepresents the data points[16],andyiimplies the equivalent labels.It can be divided as hyperplane provided aswTx+b=0,wherewrefers theddimension co-efficient vector which is normal to hyperplane,andbsignifies the offset in the origin.The linear SVM attains a better separate margin with resolving the subsequent optimized task:

With establishing Lagrangian multiplierαi(i=1,2,...,n),a primal issue is decreased to Lagarangian dual issue:

It can be obvious a quadratic optimized issue with linear constraint.In KarushKuhnTucker(KKT) condition,it is realized:αi(yi(wTxi+b)-1)=0.Ifαi＞0.The equivalent data points are named SVs.Therefore,the solution gets the subsequent procedure:w=wherenimplies the amount of support vectors(SVs).At this point,bis attained inyi(wTxi+b)-1=0,wherexiare SVs.Then,wandbare defined,the linear discriminant function is provided in Eq.(8).

Generally,the 2 classes could not be linearly divided.For the purpose of the linear learning machine for working well from non-linear cases,a common idea was established.Specifically,a novel input space is mapped as to some high dimensional feature spaces in which the trained set was linearly separate.With this mapping,the decision function is formulated as:

wherefrom the input space was signifying as the procedure ∅(xi)T∅(x)from the feature space[17].It could not essential for knowing the functional procedure of mappingφ(Xi)as it can be implicitly determined as one chosen kernel:(xi,xj)=∅(xi)Tφ(xj).Therefore,the decision function is written as:

Generally,some positive semi-definite function which fulfills Mercer’s criteria is kernel function.

In order to optimally tune the weight and bias values of the SVM model,the AOA is utilized.Usually,along with other techniques,the AOA contains 2 search stages like exploration and exploitation,simulated as mathematics functions namely-,+,*,and/.Primary,the AOA creates the group ofNsolutions(agent)[18].Everyone defines the solution to tested problem.Therefore,the solution or agent signifies theXpopulation as:

Algorithm 1:Steps of AOA Input:The parameter of AOA like dynamic exploitation parameter(α),control function amount of agents(N),and entire amount of iterations Mt.Create the primary value to the agent Xii=1,...N·while(t＜Mt)do Estimate the FF to all the agents.Define the optimum agent Xb.Upgrade the MOA and MOP utilizing Eqs.(12)&(14)correspondingly(Continued)

Algorithm 1:Continued for i=1 to N do for j=1 to Dim do Upgrade the value of r1,r2,and r3.if r1＞MOA then Exploration stage Utilize Eq.(13)for updating the Xi.else Exploitation stage Utilize Eq.(15)for updating the Xi.end if end for end for t=t+1 end while Output the optimum agents(feature subset)(Xb).

Afterward,the FF of all solutions are calculated for detecting an optimum oneXb.Next,according to the Math Optimizer Accelerated (MOA) value,AOA carries out exploration or exploitation procedures.At that point,MOAhas upgraded as the subsequent formula:

whereasMtstands for the entire amount of iterations.MinMOAand MaxOAsignifies the minimal and maximal values of accelerated functions correspondingly.In particular,the multiplication (M) and division(D)were utilized from the exploration stage of AOA as projected from the subsequent formula:

whereaseimplies the small integer value,UBjandLBjdenotes the lower as well as upper boundaries of search area atjthdimensional.μ=0.5 defines the control function.Also,Math Optimizer(MOP)is expressed as:

α=5 demonstrates the dynamic parameter which defines the precision of exploitation stage throughout iteration.

Moreover,addition (A) and subtracting (D) operators were utilized for implementing the AOA exploitation stage utilizing the subsequent formula[19].

whereasr3indicates the arbitrary number created from zero and one.Next,the agent’s upgrading procedure was executed utilizing the AOA operator.In brief,Algorithm 1 demonstrates the important steps of the AOA.

4 Experimental Validation

The proposed model is tested using three datasets namely lung cancer,mammographic mass,and Statlog-heart dataset[20].Tab.1 demonstrates the details of the dataset description.Tab.2 investigates the classifier result analysis of the FCABFS-OSVM technique under distinct epochs on the lung cancer dataset.With 100 epochs,the FCABFS-OSVM technique has gained true positive rate (TPR),true negative rate(TNR),accuracy,error,and F-measure of 83.08%,80.88%,87.04%,12.96%,and 83.35%respectively.Along with that,with 300 epochs,the FCABFS-OSVM method has received TPR,TNR,accuracy,error,and F-measure of 82.63%,85.23%,86.92%,13.08%,and 85.66%correspondingly.In addition,with 500 epochs,the FCABFS-OSVM technique has gained TPR,TNR,accuracy,error,and F-measure of 83.38%,82.36%,87.22%,12.78%,and 86.78%respectively.

Table 1:Dataset description

Table 2:Result analysis of FCABFS-OSVM technique with different epochs under lung cancer dataset

Fig.3 determines the receiver operating characteristics (ROC) curve analysis of the FCABFSOSVM system under lung cancer data sets.The figure revealed that the FCABFS-OSVM method has improved outcomes with a high ROC of 95.4070.Tab.3 examines the classifier analysis of the FCABFS-OSVM system under dissimilar epochs on the Mammographic mass dataset.With 100 epochs,the FCABFS-OSVM method has received TPR,TNR,accuracy,error,and F-measure of 86.59%,85.82%,89.41%,10.59%,and 86.69% correspondingly.Along with that,with 300 epochs,the FCABFS-OSVM procedure has attained TPR,TNR,accuracy,error,and F-measure of 84.15%,87.58%,88.51%,11.49%,and 86.45% correspondingly.In addition,with 500 epochs,the FCABFSOSVM method has archived TPR,TNR,accuracy,error,and F-measure of 86.66%,86.81%,86.26%,13.74%,and 88.16%correspondingly.

Figure 3:ROC analysis of FCABFS-OSVM technique under lung cancer dataset

Table 3:Result analysis of FCABFS-OSVM technique with different epochs under Mammographic mass dataset

Fig.4 illustrated the ROC analysis of the FCABFS-OSVM system under Mammographic mass dataset.The figure exposed that the FCABFS-OSVM method has attained improved outcomes with the high ROC of 94.8630.

Tab.4 explores the classifier analysis of the FCABFS-OSVM model under discrete epochs on the Statlog-Heart dataset.With 100 epochs,the FCABFS-OSVM approach has attained TPR,TNR,accuracy,error,and F-measure of 89.37%,90.38%,89.41%,10.59%,and 93.21% correspondingly.Along with that,with 300 epochs,the FCABFS-OSVM system has achieved TPR,TNR,accuracy,error,and F-measure of 90.40%,90.87%,89.48%,10.52%,and 91.35%correspondingly.In addition,with 500 epochs,the FCABFS-OSVM system has obtained TPR,TNR,accuracy,error,and Fmeasure of 91.54%,90.64%,91.12%,8.88%,and 92.79%correspondingly.

Fig.5 proves the ROC analysis of the FCABFS-OSVM method under Statlog-Heart data set.The figure revealed that the FCABFS-OSVM method has attained improved outcomes with the maximal ROC of 96.2790.

Figure 4:ROC analysis of FCABFS-OSVM technique under Mammographic mass dataset

Table 4:Result analysis of FCABFS-OSVM technique with different epochs under Statlog-Heart dataset

Figure 5:ROC analysis of FCABFS-OSVM technique under Statlog-Heart dataset

Fig.6 offers the accuracy and loss graph analysis of the FCABFS-OSVM system on the testing data set.The result shows that the accuracy values tend to increase and loss values tend to reduce with an increasing epoch amount.Also,it is observed that the training loss is lower and validation accuracy is higher on the testing datasets.

Figure 6:Accuracy and loss graph analysis of FCABFS-OSVM technique

Fig.7 examine the comparative classification result analysis of the FCABFS-OSVM technique over the other methods [21].The experimental results indicated that the Decision Stump (DS) and Random Tree(RT)methods have results to lower classification results.In line with this,the DT(J48)and RT algorithms have obtained slightly improved and closer classification performance.Though the Improved ID3 technique has resulted in competitive outcome,the FCABFS-OSVM technique has accomplished maximum outcome with the TPR of 82.75%,TNR of 83.40%,accuracy of 86.90%,error of 13.10%,and F-measure of 85.34%.

Figure 7:Comparative analysis of FCABFS-OSVM technique under lung cancer dataset

Fig.8 inspect the comparative analysis of the FCABFS-OSVM method over the other algorithms.The experiment result indicates that the DS and RT methodologies have resulted in low classification results.In line with this,the DT(J48)and RT models have attained improved and closer classification efficiency.Though the Improved ID3 system has resulted in competitive outcome,the FCABFSOSVM algorithm has accomplished maximal results with the TPR of 86.29%,TNR of 86.39%,accuracy of 88.57%,error of 11.43%,and F-measure of 87.01%.

Figure 8:Comparative analysis of FCABFS-OSVM technique under Mammographic mass dataset

Fig.9 investigate the comparative analysis of the FCABFS-OSVM approach over the other algorithms.The experiment result indicates that the DS and RT methodologies have resulted in low classification outcomes.In line with this,the DT (J48) and RT methods have attained improved and closer classification efficiency.Though the Improved ID3 technique has resulted in competitive outcomes,the FCABFS-OSVM approach has attained maximal results with the TPR of 89.92%,TNR of 91.10%,accuracy of 90.10%,error of 9.90%,and F-measure of 92.06%.

Figure 9:Comparative analysis of FCABFS-OSVM technique under Statlog-Heart dataset

5 Conclusion

In this study,a novel FCABFS-OSVM technique has been developed to classify the healthcare data by the use of clustering and classification models.The proposed FCABFS-OSVM technique encompasses different subprocesses such as data preprocessing,FCABFS based clustering,SVM based classification,and AOA based parameter optimization.The development of clustering and parameter tuning approaches helps to considerably boost the classification results.Furthermore,Archimedes optimization algorithm(AOA)is utilized to the SVM parameters and boost the medical data classification results.A wide range of simulations takes place to highlight the promising performance of the FCABFS-OSVM technique.An extensive comparison study reported the enhanced outcomes of the FCABFS-OSVM technique over the recent state of art approaches.In future,effective feature selection methodologies can be devised to boost the classifier results.

Acknowledgement:The authors extend their appreciation to the Deputyship for Research&Innovation,Ministry of Education in Saudi Arabia for funding this research work through the project number(IFPIP-249-145-1442)and King Abdulaziz University,DSR,Jeddah,Saudi Arabia.

Funding Statement:This project was supported financially by Institution Fund projects under Grant No.(IFPIP-249-145-1442).

Conflicts of Interest:The authors declare that they have no conflicts of interest to report regarding the present study.