2015年第25卷总目次

2015-01-27 01:52:20

中国有色金属学报 2015年12期

关键词：铝合金力学性能合金

第1期

TC11 高强钛合金激光焊接接头的显微组织与力学性能···········虞鸿江，范如意，黄坚，潘丽华，王勇(1)

热工艺参数对 TC17 合金静态球化动力学的影响················孙新，曾卫东，张志金，贾志强，徐建伟(9)

激光能量偏移对 304/C-276 异质焊缝元素分布和力学性能的影响··········吴东江，董金飞，柴东升，马广义(15)

GH4698 合金的疲劳裂纹扩展行为···································王欢，袁超，郭建亭，秦鹤勇(23)

Si和 Zn 对铝/钢异种金属熔钎焊接头界面组织的影响···········石玗，李杰，黄健康，顾玉芬，樊丁(30)

中间退火对2A97铝锂合金晶粒细化及超塑性的影响······································刘丽，叶凌英，邓运来，张新明，曾世宝，孙大翔，单朝军(36)

7075/5A06异种铝合金TIG焊接头的显微组织和力学性能··············································廖传清，宿国友，高艳芳，宋伟，鲍宏伟，高嘉爽(43)

分级电磁搅拌对半固态 Al-Cu 合金凝固组织的影响···································刘政，周翔宇(49)

热处理对高压凝固 Ti-48Al合金组织演变的影响·······朱冬冬，董多，倪成员，周兆忠，张德丰，魏尊杰(58)

超薄NiTiNb记忆合金激光焊焊缝成形及热影响区的组织和性能·····················································陆巍巍，陈玉华，黄永德，付强，封小松(63)

6061_T4 铝合金单双道搅拌摩擦焊 T 型接头组织及性能·························谢永辉，杨新岐，崔雷(72)

添加微量 TiC 对钨的性能与显微组织的影响··················孙志雨，范景莲，李鹏飞，成会朝，田家敏(80)

碳纳米管增强镁基复合材料弹性模量的研究进展·······袁秋红，曾效舒，刘勇，周国华，罗雷，吴俊斌(86)

旋转摩擦挤压制备 MWCNTs/Al复合材料的界面微观结构··············林毛古，徐卫平，柯黎明，刘强(98)

Mn、V、Mo、Ti、Zr元素对AlFeCrCoCu-X高熵合金组织与高温氧化性能的影响···谢红波，刘贵仲，郭景杰(103)

Ag和RE含量对Pb-Ag-RE合金阳极电化学性能的影响···································桂俊峰，蒋良兴，钟晓聪，于枭影，赖延清，李劼，刘业翔(111)

LiSi和 LiB 负极材料的自放电性能··················袁光明，高文秀，李成，赵小玲，郑奕，刘波(119)

镁合金铈转化膜在 NaCl溶液中的腐蚀行为及腐蚀机理·························雷黎，王昕，徐海港(125)

Ti-6Al-4V合金在铝酸盐溶液中的等离子体电解氧化和膜层性能··········································彭昭美，程英亮，李颖，曹金晖，吴有伍，蔡超(133)

元素扩散对高铝青铜喷焊层显微组织及摩擦性能的影响············································何艳艳，李文生，吴学军，王大锋，杨效田，何玲(143)

Ce 对 Al-Zn-Sn 牺牲阳极合金性能的影响·····················贺俊光，文九巴，孙乐民，高军伟，李登辉(150)

2D 结构 V2O5材料的制备与储锂性能·························李延伟，温胜山，姚金环，梁晓丽，张灵志(158)

沉积条件对低温各向同性热解炭微观结构的影响·····································张建辉，夏文莉(165)

等离子体辅助球磨活化 Al2O3合成 AlN·····················戴乐阳，张宝剑，林少芬，刘志杰，王文春(171)

黔北务正道地区沉积型铝土矿床层序地层学··································刘辰生，金中国，郭建华(179)

钼精矿真空分解工艺热力学分析···································王磊，郭培民，庞建明，赵沛(190)

红土镍矿中 MgSiO3在 NaOH 亚熔盐体系中的浸出反应机理··············赵昌明，翟玉春，王国承，艾新港(197)

铬铁矿焙烧后期铬再氧化机理··············陈永安，王武育，李平，郑诗礼，张向东，车小奎，张懿(203)

机械活化-盐酸常压浸出钛铁矿的影响·····················伍凌，陈嘉彬，钟胜奎，张晓萍，刘洁群(211)

硫酸钠和碳酸钠对高铝铁矿钠化还原动力学规律的影响························刘牡丹，姜涛，李光辉(220)

低电场强度下非均相含钛冶金熔渣的流变特性·························姜涛，张璐，廖德明，薛向欣(227)

采用碱浸预脱硅-氰化工艺从氰化尾渣中回收金·······王维大，冯雅丽，李浩然，杨志超，张旭，易爱飞(233)

高砷烟尘碱浸渣制备焦锑酸钠的新工艺····························易宇，石靖，田庆华，郭学益(241)

煤泥对浸锌渣的直接还原作用····························杨慧芬，蒋蓓萍，王亚运，苑修星，张莹莹(250)

粗骨料高浓度充填料浆的管道输送模拟及试验·······································张修香，乔登攀(258)

第2期

直接凝固注模成型的研究进展································王小锋，孙月花，彭超群，王日初，张斗(267)

航空用钛合金研究进展···································金和喜，魏克湘，李建明，周建宇，彭文静(280)

AZ31B 镁合金挤压材料的力学性能与本构分析································吴章斌，桂良进，范子杰(293)

热处理对静液挤压 AZ80 镁合金管材腐蚀行为的影响············吴志林，吴多祥，袁人枢，赵磊，赵言宝(301)

变形温度对 2A14 铝合金显微组织和力学性能的影响············刘文胜，刘东亮，马运柱，王娟，杨波平(308)

Zn 元素及时效工艺对 2056 铝合金局部腐蚀行为的影响··················罗先甫，郑子樵，张利娟，赵阳(315)

高应变率下 TC4-DT 钛合金的动态力学性能及塑性本构关系··············张长清，谢兰生，陈明和，商国强(323)

脉冲强磁场处理对 TC4 钛合金显微组织及力学性能的影响···············李桂荣，李月明，王芳芳，王宏明(330)

γ-TiAl基合金弹性和塑性尺度效应所对应内在特征尺寸的关系··························苏继龙，连兴峰(338)

连续变断面循环挤压对 TC4 合金组织的影响···················李洁，刘莹莹，王庆娟，尤雪磊，王坤(344)

铝/钢异种合金激光-电弧复合焊接接头的界面性能及抗拉强度··············································梅述文，成群林，姜勇，胡佩佩，孙锡建，高明(351)

W/CuCrZr合金热等静压焊接·········王钦，杨发展，朱海龙，练友运，李宗秦，刘翔，童洪辉，沈丽如(360)

CoCrFeNiTi0.5高熵合金在熔融 Na2SO4-25%NaCl中的腐蚀行为···········李萍，庞胜娇, 赵杰，李廷举(367)

Zn 在模拟酸雨大气环境中的腐蚀行为·························刘雨薇，王振尧，曹公望，吕旺燕，苏伟(375)

ECAPT 工艺下纯铝粉末-包套变形行为的数值模拟与实验········王晓溪，何敏，陆兴华，薛克敏，李萍(384)

基体合金对连续 SiCf/Al复合材料显微组织及拉伸强度的影响·····徐志锋，徐燕杰，余欢，王振军，周珍珍(392)

镁合金表面氟转化层降解过程的电化学阻抗谱··········张春艳，柳歆鹏，黄佳祈，刘成龙，杨惠，杨有利(401)

层状热障涂层孔隙微结构对其隔热性能影响的数值研究·················凌锡祥，王玉璋，王星，李佳莉(408)

Ti-Ni形状记忆合金表面PVA/SiO2复合涂层的制备······································肖韬，徐大宝，肖自安，李周，雷前，许彬，邢岩(415)

多弧离子镀制备的 CrCN 涂层组织及摩擦磨损性能·············陈颢，叶育伟，王永欣，李金龙，羊建高(423)

阳极氧化制备TiO2纳米管阵列的可控相转变及表征······································马清，陈建军，符冬菊，李冬霜，叶利强，张维丽，刘绍军(430)

以水稻秸秆为模板和硅源制备Si-BiVO4的机制及其光催化性能··············································王敏，牛超，黄佳丽，车寅生，郑浩岩，杨长秀(440)

Pd 包覆 TiZrNiCo 的抗毒化及动力学性能··············潘昌盛，郭秀梅，王树茂，刘晶，刘晓鹏，蒋利军(449)

基于数值模拟的 TP2 铜管三联拉工艺优化····································刘劲松，陈大勇，张士宏(458)

剪切力对半固态Sn-Bi合金的组织演变与塑性的影响······················郑辉庭，胡永俊，肖小亭，杨宏欢，李人杰，李昔强，成晓玲，李风，孙晓燕(466)

CoOOH 的热力学性质·······································田庆华，辛云涛，毛芳芳，王恒利，郭学益(472)

大别山姚冲花岗岩锆石U-Pb年龄、Hf同位素及地质意义··············································刘清泉，邵拥军，张智慧，张宇，李冰，张驰(479)

硫化矿石自热过程的分维特性·······································潘伟，吴超，李孜军，杨月平(492)

高铁一水硬铝石矿焙烧预处理溶出赤泥的沉降性能·····张旭华，张廷安，吕国志，王小晓，张伟光，朱小峰(500)

HNO3-Al(NO3)3络合浸出包头稀土精矿中的氟元素及其络合机理······················································李梅，张晓伟，刘佳，柳召刚，阳建平(508)

铝电解槽槽体与环境界面换热系数的计算······················杨帅，张红亮，邹忠，赖延清，李劼(515)

铜钢复合冷却壁传热及热应力分析···································刘奇，程树森，牛建平，刘东东(523)

以脱铝赤泥-脱铝粉煤灰为原料制备硬硅钙石···················郭曦尧，马淑花，吕松青，郑诗礼，邹兴(534)

废弃电路板多金属粉末碱性熔炼产物分形浸出动力学··························刘静欣，郭学益，刘旸(545)

第3期

脉冲电流条件下工业态 AZ31 镁合金板材的气胀成形···························李超，李彩霞，赵闪(553)

应变速率对 AM80 镁合金压缩变形行为的影响········王冰洁，郭鹏程，李世康，叶拓，曹淑芬，李落星(560)

微观孔洞对铝合金压铸件疲劳性能的影响····································万谦，赵海东，葛继龙(568)

大气污染物对 7B50 铝合金电化学腐蚀性能的影响············孙擎擎，孙睿吉，陈送义，陈启元，陈康华(575)

固溶温度对 6082 铝合金显微组织与性能的影响················刘胜胆，陈小连，张端正，邓运来，张新明(582)

采用FSW与MIG工艺补焊6005A-T6铝合金的接头力学性能····姚俊歌，贺地求，赖瑞林，李然，王海军(589)

AA6082 铝合金热变形损伤本构模型································马闻宇，王宝雨，周靖，唐学峰(595)

多道搭接 FSP6061 铝合金的组织与性能······························刘强，王淼，张亚雄，刘满平(602)

显微组织的非均匀性对 AA2099-T8 铝锂合金局部腐蚀的影响············麻彦龙，孟晓敏，黄伟九，张小彬(611)

快速凝固过共晶 Al-Si合金的显微组织及其热稳定性············蔡志勇，王日初，张纯，彭超群，解立川(618)

基于材料非均匀性铝厚板预拉伸残余应力的预测方法························秦国华，林锋，左敦稳(626)

浸锌工艺对铝/电镀镍结合强度的影响························罗扬，崔景毅，石高锋，杨文慧，田文怀(634)

钛合金表层机械处理的纳米化组织、力学性能与机理研究进展········李慧敏，李淼泉，刘印刚，刘洪杰(641)

基于内变量的 TA15 板材室温拉伸力学性能预测模型····················杨雷，王宝雨，刘钢，赵慧俊(652)

Ti2AlNb 基合金固态扩散连接工艺····························李贝贝，王斌，李萍，刘雨生，薛克敏(662)

Cu-Cr-Zr-Nd 合金高温热变形及组织演变·······许倩倩，张毅，柴哲，田保红，刘勇，刘平，陈小红(668)

Pd添加对Zr-4合金在LiOH水溶液中耐腐蚀性能的影响············································张金龙，梁楠，赵寒沛，苟少秋，姚美意，周邦新(675)

金刚石抛光用钨合金的热压烧结····························林佳志，金洙吉，史双佶，钟秀虹，姜冠楠(682)

AZ91D 镁合金微弧氧化膜生长方式的多维探讨·················董海荣，马颖，郭惠霞，张玉福，郝远(690)

以 Li2TiO3为原料合成 Li4Ti5O12的机理和电化学性能····················阚素荣，袁敏娟，刘菲，卢世刚(697)

锂离子电池正极材料 Li2MnO3的显微组织与电化学性能··········邵威，刘昌位，郭玉忠，吴佳，王剑华(705)

高比能量Ti/(Ir0.3Sn(0.7-x)Cex)O2电极材料的制备及其电化学性能·············································邵艳群，伊昭宇，朱君秋，娄长影，马晓磊，唐电(714)

MnFeCu反铁磁形状记忆合金中FCC-FCT马氏体相变晶体学······················································王林，崔严光，万见峰，张骥华，戎咏华(720)

Co/Ni摩尔比对 FeCoNiCrZr非晶合金晶化过程及磁性能的影响···········谢春晓，杨元政，钟守炎，邓世春(727)

Ag-IPMC 的制备及形貌表征·········································徐岩，赵刚，朱玉敏，孙壮志(733)

基片温度对WO3薄膜的微观结构和NO2气敏特性的影响············································沈岩柏，张宝庆，曹先敏，魏德洲，刘文刚，高淑玲(740)

高速压制法制备 Al2O3弥散强化铜合金·······································闫志巧，陈峰，蔡一湘(747)

原位合成 NiTi-TiB2复合材料的显微组织与性能···············姜江，马之远，邵阳，彭文屹，漆艳军(754)

金川铜镍硫化物矿床两个主要矿体的母岩浆在岩浆演化过程中的关系··················································曾认宇，赖健清，毛先成，艾启兴，岳斌(761)

豫南姚冲钼矿床二长花岗岩锆石微量元素特征及其地质意义·····刘清泉，张宇，张智慧，李冰，张驰(776)

石硫合剂对金精矿浸出特性的影响···································赵留成，孙春宝，李绍英，龚道振(786)

全尾砂絮凝沉降速度优化预测模型········································王新民，赵建文，张德明(793)

500 kA级铝电槽内氧化铝浓度场的数值模拟···江南，邱泽晶，张翮辉，张红亮，杨帅，李劼，刘庆生(799)

高砷烟尘氢氧化钠-硫化钠碱性浸出脱砷······························易宇，石靖，田庆华，郭学益(806)

Cl--BSP-RPE 添加剂存在下 Cu 在铜电极上的电沉积···································丁辛城，张震(815)

细菌化学诱变育种对富钾砂页岩生物浸矿提钾的影响···················周德志，陈晔，曹飞，孙德四(824)

第4期

对流作用下镁合金凝固组织演变的数值模拟··································杨满红，郭志鹏，熊守美(835)

AZ91D 镁合金微弧氧化膜的致密性及其对耐蚀性的影响·········董海荣，马颖，郭惠霞，张玉福，郝远(844)

高 Zn 含量 Al-Zn-Mg-Cu 系铝合金的凝固态显微组织············滕海涛，熊柏青，张永安，刘红伟，贺昕(852)

时效制度对挤压Al-6.2Zn-2.3Mg-2.3Cu铝合金电化学腐蚀性能的影响······················································孙擎擎，董朋轩，孙睿吉，陈启元，陈康华(866)

Zn含量对铸态Mg-Dy合金显微组织和力学性能的影响··········································毕广利，李元东，黄晓峰，陈体军，马颖，郝远(875)

复合碳变质剂对 AZ91D 镁合金的晶粒细化作用·················卢敏敏，李克，吴尚敏，周耐根，曾效舒(883)

7475-T7351 铝合金厚板的疲劳性能···················陈军，段雨露，彭小燕，肖丹，徐国富，尹志民(890)

析出相对 Al-Cu-Mg 合金蠕变行为的影响··············陈宇强，潘素平，刘文辉，蔡志华，唐思文，唐昌平(900)

新型热机械处理对Al-Zn-Mg-Cu合金显微组织与性能的影响··············································张纪帅，陈志国，任杰克，陈继强，魏祥，方亮(910)

W-ZrB2合金的烧结行为·············································毛碧波，成会朝，范景莲，田家敏(918)

淬火水温对 ZL210A 合金显微组织及力学性能的影响····················马雨，徐志锋，蔡长春，张永才(924)

Cu-Cr-Zr-Ag合金高温热变形行为与变形机制······································张毅，许倩倩，柴哲，田保红，刘勇，刘平，陈小红(931)

层错能对电沉积纳米晶 Ni-Fe 合金显微组织与力学性能的影响··························温建程，戴品强(938)

碳含量对金属注射成形17-4PH不锈钢显微组织和力学性能的影响··············································张翔，何浩，李益民，刘晨，满露梅，胡幼华(945)

热处理对 316L/Q345R 不锈钢复合板显微组织与力学性能的影响··········金贺荣，张春雷，韩雪艳，宜亚丽(952)

CP-Ti和 Ti-0.2Pd 合金的显微组织对其耐蚀性的影响····················刘冰，周清，瞿瑞锋，常王桃(959)

Cu/Sn-58Bi/Ni焊点液-固电迁移下 Cu 和 Ni的交互作用··················黄明亮，冯晓飞，赵建飞，张志杰(967)

铝/铜异种材料填丝钨极氩弧焊对接接头的组织和性能··················彭迟，程东海，陈益平，胡德安(975)

锌防护层修复涂料组分对防护性能的影响·····························田东波，高瑾，李晓刚，李辛庚(982)

Mo2C改性涂层制备温度对C/C-Cu复合材料组织和性能的影响······················································周文艳，易茂中，冉丽萍，彭可，葛毅成(990)

添加 Al2O3对 Ti3SiC2复合材料性能的影响·····················陈金学，尹洪峰，帅航，田养利，袁蝴蝶(997)

新型 Hg3In2Te6芯片引线的键合机制··································王晓珍，傅莉，李亚鹏，李林峰(1005)

Fe2B-Mo2FeB2基金属陶瓷的显微组织与性能·································魏祥，陈志国，黄奇胜(1012)

N-Al共掺杂 TiO2电子结构及光学性质的理论研究··············荆涛，张苹，阚伟，田景芝，邓启刚(1018)

网状结构高孔率泡沫钛的特性·······························刘培生，侯红亮，顷淮斌，王耀奇，张艳苓(1025)

采用高分子网络凝胶法制备 LaP3O9:Eu3+发光材料及其性能··············贾晓卉，曾晓岛，朱莉萍，杨锦瑜(1032)

贵州省天柱大河边重晶石矿床成矿物质来源··························侯东壮，吴湘滨，李贞，刘玉红(1039)

含硫高黏性三相流态充填浆体管道输送性能··························杨建，王新民，张钦礼，柯愈贤(1049)

采用Mextral54-100从Zn(Ⅱ)-NH4Cl-NH3配合物溶液中萃取锌······································朱如龙，李兴彬，魏昶，黄卉，李存兄，邓志敢，樊刚(1056)

基于正交试验的电置换提镉工艺优化及电化学研究······何静，戚春萍，段良洪，叶龙刚，张家玮，王夏阳(1063)

基于区位氧势硫势梯度变化下铜富氧底吹熔池熔炼非稳态多相平衡过程····························································郭学益，王亲猛，田庆华，张永柱(1072)

铝合金在海洋微生物 SRB 作用下的腐蚀行为···········陈海燕，李霞，张雪云，曾键波，陈丕茂，余景(1080)

硫化镍钴矿微生物浸出液萃取除杂过程中界面乳化物的形成·····李晓晖，周桂英，黄松涛，温建康，丁建南(1086)

采用阴离子膜电解法从红土镍矿常压浸出液中制备金属镍······························孟龙，曲景奎，谢克强，张培育，韩林芯，郭强，齐涛，张国之(1093)

燕麦秸秆酸浸回收废旧锂电池中 Co 的动力学··········贺凤，满瑞林，刘琦，孙祖眉，徐娟，张建(1103)

铁泥溶剂热法制备磁性材料及其在水溶液中对亚甲基蓝的吸附性······························方帅，刘志强，陈瑜，霍明昕，边德军，杨霞，耿直，朱遂一(1109)

第5期

Al3(Sc,Zr)粒子与剪切带对Al-Mg-Sc-Zr合金再结晶及断裂行为的影响··············································黄宏锋，姜锋，刘兴涛，周江，钟沐春，韦莉莉(1117)

热挤压 AZ31 镁合金单向压缩变形的应变硬化行为·····················周德智，鲁月，马茹，王轶农(1128)

Mg-xGd-Zr合金均匀化处理过程中方块相的显微结构···································郑伟文，李兴刚，张奎，马鸣龙，李永军，石国梁，袁家伟(1136)

Ca 添加及变形条件对 Mg-Zn 合金组织与织构的影响···················丁汉林，王天一，徐成志，李殿凯(1142)

半固态 A380 铝合金浆料凝固过程中显微组织的演变···················刘志勇，毛卫民，王伟番，郑志凯(1153)

热轧 AlB2-Al原位复合材料的显微组织和力学性能····························元琳琳，韩静涛，刘靖(1163)

深冷时效循环处理铝基原位复合材料的显微组织和力学性能············李桂荣，崔玉华，王宏明，赵玉涛(1168)

铝(4A60)-钢(08Al)复合带材界面化合物形成及结合性能·······················陈鑫，李龙，周德敬(1176)

7050 铝合金氢致附加应力与氢脆·············祁文娟，宋仁国，祁星，王超，李海，金骥戎，孙斌(1185)

半固态ZCuSn10铜合金坯料单向压缩变形行为及显微组织··············································胡海莲，肖寒，王佳，周荣锋，卢德宏，周荣(1193)

Mohr-Coulomb屈服准则与Drucker-Prager屈服准则在块体非晶合金中的应用··········································邹萍，钟鸣，龙志林，陈舒敏，廖光开，杜雪林(1200)

碳纳米管增强Cu和Al基复合材料的研究进展·····························易健宏，鲍瑞，李才巨，沈韬，刘意春，陶静梅，谈松林，游昕(1209)

Mg-1.0Ca合金微弧氧化膜在模拟体液中的腐蚀降解行为···········································张荣发，张勇强，张淑芳，郭世柏，刘洋，向军淮(1220)

Li-Si-Zr三元相图的实验研究与热力学优化·········龙朝辉，梁思远，尹付成，赵满秀，李智，刘永雄(1227)

含铝富锂正极材料xLi2MnO3·(1-x)LiNi0.8Co0.15Al0.05O2的制备和电化学性能······················葛龙，杨秀康，余睿智，王迪，王先友，舒洪波，邹贵山，鞠博伟，温伟城(1236)

AgCuO 电触头材料的电接触性能··································陶麒鹦，周晓龙，周允红，张浩(1244)

Al和Si对热浸Zn-Al-Mg合金镀层组织和耐腐蚀性的影响···········································贺志荣，刘继拓，解亚丹，周超，刘琳，戚云昊(1250)

等温时效对 In-3Ag/Cu 焊接界面组织演变特征的影响·········马运柱，罗辉庭，李永君，刘文胜，黄国基(1256)

凝胶浇注法制备的纳米铜粉在导电胶中的应用························叶楠敏，程继贵，陈闻超，李剑峰(1264)

Co 添加对 17Ni-(10NiO-NiFe2O4)金属陶瓷的致密化及力学性能的影响····林启权，赵爽，姜滔，董文正(1270)

烧结工艺和Y2O3添加量对Ti(C,N)基金属陶瓷显微组织和力学性能的影响··································孙万昌，张佩，李攀，佘晓林，魏汉军，赵坤，张峰(1277)

Co2+含量对镀 Ti金刚石-Ni-Co 复合电沉积的影响·······张鹂，王日初，彭超群，张纯，谭时雨，王乃光(1285)

共沉淀-氢气还原法制备碲化镉粉末········································刘远，郑雅杰，孙召明(1294)

添加 Sb 纳米颗粒润滑油的摩擦学性能························徐建林，冯冲，牛磊，淡小敏，文琛(1300)

Cu单元素基合金表面FeCoCrAlCu激光高熵合金化涂层的制备··············································张春华，单丽娜，吴臣亮，张松，关锰，谭俊哲(1308)

大地电磁二维正演中的有限元-径向基点插值法·····································李俊杰，严家斌(1314)

水岩作用下岩体裂纹亚临界扩展·················································曹平，陈绍名(1325)

蛇纹石矿物的高温相变对红土镍矿直接还原的影响····················刘志国，孙体昌，高恩霞，王晓平(1332)

羟肟酸浮选白钨矿的机理·················································高玉德，邱显扬，韩兆元(1339)

高硫矿石细菌脱硫及其反应动力学分析····························艾纯明，吴爱祥，王贻明，王少勇(1345)

钒在高钛渣系与铁液间分配行为与热力学分析·····················王振阳，张建良，邢相栋，刘征建(1355)

改性生物质材料对 Cr(Ⅵ)的吸附性能·······揭诗琪，乔丽媛，李明明，柳若霖，冯雨晴，朱建裕，覃文庆(1362)

用 N235 从富铁高酸度硫酸浸出液中萃取除铁·····················张魁芳，刘志强，曹洪杨，邱显扬(1370)

水热温度对硫酸铝尿素沉积产物晶型和脱水动力学的影响·····················王峻，王晶，刘超(1378)

采用电化学方法研究LIX84I萃取Cu2+的界面转移过程···································周文辉，胡久刚，唐晖，李娅，付明波，孙乐行，陈启元(1387)

采用碱性加压氧化浸出从高铋铅阳极泥中脱除砷锑·····································李阔，徐瑞东，何世伟，陈汉森，朱云，华宏全，舒波(1394)

羟自由基对三聚铝酸根离子(Al3-B 基团)环合反应的影响··············尹周澜，丁治英，李俊，张牧群(1403)

第6期

Mg-12Gd 合金的时效析出行为······································周丽萍，曾小勤，李德江，杨春明(1409)

6061铝合金与30CrMnSiA结构钢在模拟工业-海洋大气环境下的电偶腐蚀防护··············································冯驰，黄运华，申玉芳，肖葵，孟凡彰，李晓刚(1417)

近液相线挤压铸造工艺对ADC12铝合金支架显微组织和力学性能的影响···········王绍著，赵密，胡茂良，吉泽升，李欣，王云龙，Sumio SUGIYAMA, Jun YANAGIMOTO(1428)

5005 铝合金与 4J34 可伐合金的真空钎焊工艺··················张丽霞，孟德强，亓钧雷，郑文龙，冯吉才(1435)

挤压铸造 Al-5.0Cu-0.6Mn-1.0Fe-1.0Ni合金的高温力学性能·······娄照辉，张卫文，罗执，郑成坤，孟凡生(1441)

Ni-Al间作用势对Ni75Al14Mo11合金原子有序化影响的微观相场模拟··············································马庆爽，靳玉春，赵宇宏，侯华，王欣然，王锟(1450)

长期热暴露对不同表面状态的 Ti-44Al-5Nb-1W-1B 合金疲劳性能的影响··········赵振兴，孙红亮，黄泽文(1458)

超高频感应连续钎焊立方氮化硼磨粒的界面反应机理··················李奇林，苏宏华，徐九华，雷卫宁(1465)

工业纯钛高温拉伸性能及断口形貌···························苏娟华，周铁柱，任凤章，魏世忠，陈志强(1471)

热处理对 4.5%Re 单晶镍基合金高温蠕变行为的影响············舒德龙，田素贵，吴静，李秋阳，蒋崇亮(1480)

含铪高钨 K416B 镍基铸造高温合金的组织与蠕变行为··················谢君，于金江，孙晓峰，金涛(1490)

石墨烯/Al复合材料的微观结构及力学性能································李多生，吴文政，QIN Qing-hua，周贤良，左敦稳，鲁世强，郜友彬(1498)

BaZrO3耐火材料与 TiAl合金熔体的界面反应··········贺进，魏超，李明阳，汪宏斌，鲁雄刚，李重河(1505)

基于Berkovich压痕的金属材料弹塑性参数仪器化压入识别方法·····················································陈伟，马德军，郭俊宏，宋仲康，王家梁(1512)

直写成型技术：一种新型微纳尺度三维结构的制备方法··········孙月花，彭超群，王小锋，王日初，陈以心(1525)

Mg65Ni10RE25(RE=La, Ce, Pr, Nd, Mm)非晶储氢合金电极的性能··············································张琦，李双寿，董占民，汤彬，李睿，林万明(1538)

超高强Cu-6.5Ni-1Al-1Si-0.15Mg-0.15Ce合金的淬火敏感性··············································黎三华，申镭诺，李周，董琦祎，肖柱，邢岩(1546)

Si/莫来石/Er2SiO5环境障涂层的高温氧化行为························范金娟，常振东，陶春虎，王富耻(1553)

纳米 SiC 颗粒对微米 Ni-SiC 复合镀层性能的影响·····························王红星，毛向阳，沈彤(1560)

钛合金表面 Ta-W 涂层的制备及循环氧化行为··········彭小敏，夏长清，吴安如，董丽君，李东锋，谭季秋(1567)

多孔基体负载型钯膜制备质量控制和缺陷修补的研究进展··············魏磊，俞健，胡小娟，黄彦(1579)

钙盐和氢氧化钾浓度对钛合金微弧氧化膜表面形貌及成分的影响······································乔丽萍，江龙发，黄华德，曲彪，张淑芳，张荣发，向军淮(1590)

纳米/微米金刚石薄膜对钛合金摩擦性能和耐腐蚀性能的影响······························王菁清，龙航宇，谢友能，邓泽军，周静，魏秋平，余志明，唐瞻贵(1597)

动力锂离子电池模块散热结构仿真研究········程昀，李劼，贾明，汤依伟，宋文锋，张治安，张凯(1607)

P 掺杂 4H-SiC 超晶胞的第一性原理计算···············史茹倩，吴一，刘红，刘晨吉，郑树凯，王晓媛(1617)

常压烧结法制备 ZnO 陶瓷靶材······································孙文燕，王日初，王小锋，彭超群(1625)

采用前驱体混合烧结法制备的LiCoO2的电化学性能··············································涂健，赵孝连，周铁刚，李枝贤，向黔新，董侠(1634)

酸浸浓度对高钛酸浸渣光催化活性的影响·····················雷雪飞，薛向欣，杨合，朱祥剑，李振朋(1640)

化学气相沉积钨显微组织缺陷的形成与控制············沈艳波，于晓东，谭成文，王富耻，马红磊，才鸿年(1648)

铜银合金导线的显微组织与性能····································文姗，常丽丽，尚兴军，李胜利(1655)

基于高斯牛顿法的二维直流电阻率法的快速反演···············赵东东，张钱江，戴世坤，陈龙伟，李昆(1662)

不同冲击条件下早龄期混凝土的力学特性·····················李夕兵，王世鸣，周韬，黄麟淇，周健(1672)

氧气底吹铜熔炼渣中多组元造渣行为及渣型优化···············王亲猛，郭学益，田庆华，廖立乐，张永柱(1678)

生物浸出过程中的藻酸盐作用及其机理的研究进展·····························余润兰，刘亚楠，周丹，彭堂见，刘学端，顾帼华，邱冠周，曾伟民(1687)

脉冲电催化内电解去除浮选废水中的铅和苯胺黑药······································李天国，占强，徐晓军，凤世林，李昊，刘树丽，武英魁(1694)

NaCl-HCl体系浸出铅渣中铅的动力学分析······························杨利姣，陈南春，钟夏平，解庆林，高军，郎耀秀，刘长淼，吴照洋(1705)

硫酸盐还原菌颗粒污泥去除U(Ⅵ)的影响因素及稳定性······································谢水波，陈胜，马华龙，唐振平，曾涛涛，凌辉，吴宇琦(1713)

基于分子动力学理论制备含氮磷硼酸酯添加剂及其摩擦学性能··········熊桑，孙建林，徐阳，严旭东(1721)

第7期

耐烧蚀超高温陶瓷改性 C/C 复合材料的研究进展···············李军，杨鑫，刘红卫，黄启忠，苏哲安(1731)

激光冲击强化技术的研究进展····························乔红超，高宇，赵吉宾，陆莹，赵亦翔(1744)

Ce 添加对 AP65 镁合金显微组织及电化学性能的影响···········胡程旺，王日初，彭超群，冯艳，王乃光(1756)

5A06 铝合金中厚板的拉深变形行为········································张志超，徐永超，苑世剑(1764)

喷射沉积法制备Al-Zn-Mg-Cu-Zr合金的显微组织与性能············································刘斌，汪明朴，雷前，段雨露，刘林贤，虞红春(1773)

电磁搅拌法制备的半固态 2A50 合金的显微组织演变··························张晨阳，赵升吨，王永飞(1781)

内外压复合作用下 5A02 铝合金管材的硬化行为····························崔晓磊，王小松，苑世剑(1790)

基于质点逆向追踪的铝合金空心型材横断面温度的不均匀性·················································侯文荣，张志豪，谢建新，马青梅，盖洪涛(1798)

富铈混合稀土对 Al-80%Si合金凝固行为和组织的影响·······刁龙，坚增运，朱满，常芳娥，许军锋(1808)

6061-T6 铝合金高温本构模型及温成形数值模拟·····················盈亮，戴明华, 胡平，闫巧云(1815)

一次时效温度对新型高强耐蚀GH925合金显微组织和力学性能的影响··········································石照夏，颜晓峰，段春华，周江波，何云华，赵明汉(1822)

Mn/Fe摩尔比对 A356 铸造铝合金富铁相形态的影响···························宋东福，王顺成，郑开宏(1832)

高体积分数 MWCNTs/AZ80 复合材料的显微组织·····················徐卫平，李蒙江，柯黎明，邢丽(1839)

流延成型技术的研究进展····························谢雨洲，彭超群，王小锋，王日初，刘家杰，徐健(1846)

基于第一性原理掺杂稀土 Ce的 Cr13 钢组织及其抗 CO2腐蚀性能·········王勇，张正江，张旭昀，孙振旭(1858)

CNTs/Cu 复合超细粉末及其复合材料的制备·················胡柏新，陈小华，许龙山，汪次荣，林承润(1867)

Nb添加对Zr50.5-xAl9Ni4.05Cu36.45Nbx非晶合金热稳定性及力学性能的影响····················································张丹，邱克强，任英磊，李荣德，胡壮麒(1876)

热型连铸铝线的制备及其显微组织和性能············胡炜，王彦红，赵小军，肖来荣，饶博，章玮(1882)

碳源对 Sn-Co/C 复合材料显微组织和电化学性能的影响················沈丁，董伟，李思南，杨绍斌(1890)

层状 Li0.5Na0.5CoO2的合成及显微结构························周然，王琛，梁钰，石逸扬，艾延龄(1897)

悬臂梁基板对压电纤维复合物驱动性能的影响················朱松，陈子琪，林秀娟，周科朝，张斗(1904)

锂离子导体包覆镍锰酸锂正极材料的制备及其电化学性能············熊利芝，刘文萍，吴玉先，何则强(1911)

超音速火焰喷涂碳化钨-钴涂层磨粒磨损行为························王群，屈帮荣，唐瞾肸，熊浩奇(1920)

基于仪器化Vickers压入比功与马氏硬度识别材料维氏硬度的方法····王家梁，马德军，孙亮，黄勇(1929)

电磁压制多元金属混合粉末的压型方程·······················高歌，胡建华，程呈，吴轩，张达(1937)

基于旋转交错网格的探地雷达正演数值模拟·································张彬，戴前伟，尹小波(1943)

某铅锌尾矿浓密机溢流的工艺矿物学分析·································成岚，李茂林，黄光耀(1953)

堆浸体系含水率的影响因素······················································尹升华，陈勋(1961)

含硼铁精矿还原过程中硼矿物的热力学行为·································余建文，韩跃新，高鹏(1969)

碳还原锌浸出渣炼铁过程的热力学分析···刘洋，谭军，刘常青，尹周澜，陈启元，张平民，廖舟(1978)

基于同时平衡原理的Au-I--H2O系热力学分析····································李绍英，赵留成，孙春宝，袁喜振，王培龙，邓祥意，刘柯(1987)

冶金渣颗粒与空气间的换热和阻力特性·····················米沙，谢锴，孙岱，严兵，李启(1993)

微波焙烧预处理难浸含金硫精矿·································陈伟，丁德馨，胡南，李峰(2000)

3-己基-4-氨基-1,2,4-三唑-5-硫酮在黄铜矿表面的吸附动力学与热力学···················································曲肖彦，刘广义，刘胜，钟宏，肖静晶(2006)

聚乙二醇对氧化亚铁硫杆菌浸出黄铜矿的影响······张瑞洋，魏德洲，刘文刚，卢涛，沈岩柏，崔宝玉(2015)

全氟物改性煅白的防吸湿机理············梁晓波，李明照，王国卫，梁一然，张耀斌，毛嘉，任川兮(2022)

第8期

流变压铸 A380 铝合金的显微组织与力学性能··················祁明凡，康永林，周冰，张欢欢，朱国明(2029)

GW01 铝合金管材的热处理工艺··············李龙飞，邢书明，杨金山，王井玲，马洪岩，刘华，郭凯(2040)

时效过程中亚晶界析出演变对 7050 铝合金性能的影响·························顾伟，李静媛，王一德(2049)

Ti和 Zr对铝合金冷金属过渡原位焊接性能的影响······················雷玉成，李雪，崔剑，胡超(2057)

冷热循环处理对 6005A 铝合金焊接接头显微组织和力学性能的影响····················季凯，张静(2066)

ZX115 镁合金热压缩过程的本构分析及有限元模拟·············丁汉林，徐成志，张晓军，潘晓东，王天一(2075)

Al-Cu-Li-Mg-Mn-Zn-Ag合金的热变形流变行为与本构方程

··············································杨胜利，沈健，闫晓东，李锡武，孙宝庆，张飞(2083)

酒石酸钠体系阳极氧化对 TB8 钛合金薄板疲劳性能的影响·······余永水，谢兰生，陈明和，黄珺，洪海华(2091)

Inconel 601 镍基高温合金激光焊焊缝的显微组织···············敖三三，罗震，单平，步贤政，刘为东(2099)

少量 TiB 晶须对 Ti-B20 合金 β 晶粒长大行为的影响···································黄立国，陈玉勇(2108)

近 β 型 Ti-1300 合金的显微组织分析··················张志超，金头男，谷秀志，赵永庆，常雷，王二平(2115)

Ni42.2W19.2Fe18.9B19.7非晶合金的电化学腐蚀行为·········刘文胜，吴亚瑜，马运柱，张佳佳，叶晓珊，田海官(2123)

国产聚丙烯腈基炭纤维皮芯微区结构差异的拉曼光谱表征··············································武帅，刘云启，葛毅成，冉丽萍，彭可，易茂中(2131)

锌锅焊缝在 450 ℃铁饱和锌液中的腐蚀行为············车淳山，朱井军，孔纲，卢锦堂，张双红，王明海(2139)

多孔 SiC 陶瓷的研究进展····································陈以心，王日初，王小锋，彭超群，孙月花(2146)

微焊点中金属原子的热迁移及其对界面反应影响的研究进展············赵宁，钟毅，黄明亮，马海涛(2157)

碳纳米管-石墨烯/氧化亚铜复合球的制备及光催化性能··············································汪次荣，曾斌，陈小华，邓伟娜，熊轶娜，李哲(2167)

基于电化学模型的全固态锂离子电池的放电行为········洪树，汤依伟，贾明，艾立华，殷宝华，李劼(2176)

并联结构 d15模式 PZT-51 悬臂梁的俘能性能···········张智雄，郑学军，张勇，梅靖羚，费明祥，祝元坤(2183)

轴向磁场对电弧离子镀CrN薄膜显微组织及耐腐蚀性能的影响···赵彦辉，李天书，于宝海，肖金泉，林国强(2190)

Ag3PO4/Ni纳米薄膜降解罗丹明B的光电催化性能和反应机理····李爱昌，赵娣，刘盼盼，孙少敏，刘萌(2196)

污染监测视电阻率快速三维反演成像································崔益安，朱肖雄，陈志学，柳建新(2205)

主要载金硫化物黄铁矿的热分解动力学特性············赵留成，孙春宝，张舒婷，谢文清，郑新烟，刘柯(2212)

难处理含硫金精矿生物预氧化方法的强化工艺··········刘新星，王国华，谢建平，李寿朋，郭玉洁，潘昊旻(2218)

水相环境中十二胺在石英及磁铁矿表面吸附的分子动力学模拟························刘安，樊民强(2226)

钨钼分离吸附剂的选择性判据·············································王文强，何利华，赵中伟(2236)

低温碱性熔炼分离富集铜阳极泥中的有价金属························郭学益，许志鹏，田庆华，李栋(2243)

MomSn(m+n≤8)团簇的结构、稳定性和电子性质·········周岳珍，卢勇，刘大春，陈秀敏，李玮，徐俊杰(2251)

铜电解槽内电解液流场的数值模拟············李明周，黄金堤，童长仁，张文海，周孑民，李贺松，张鹏(2259)

从铜镉渣浸出液中电加强置换提取镉··········杨建广，雷杰，彭思尧，何静，戚春萍，王夏阳，李焌源(2268)

起泡剂 MIBC 和 BK-201 的浮选泡沫特性······················曾培，欧乐明，冯其明，李洪强，张福亚(2276)

铁酸锌选择性还原方法及其在锌焙砂处理中的应用······陈栋，彭兵，柴立元，彭宁，胡明，李燕春(2284)

采用亚硫酸钠还原法从沉金后液中回收稀贵金属···············张福元，郑雅杰，孙召明，马亚赟，董俊斐(2293)

柠檬酸插层MgAl水滑石对水溶液中 Zn2+的吸附性能····申延明，张僖，赵晓蕾，刘东斌，樊丽辉，李士凤(2300)

零价铁对奥奈达希瓦氏菌还原 U(Ⅵ)的影响及机制······刘金香，谢水波，马华龙，王永华，陈华柏，李标(2309)

第9期

固溶处理对Al-5.8Cu-0.6Mg-0.6Ag-0.3Nd合金组织和力学性能的影响··································田哲，易丹青，刘会群，王斌，涂晓萱，江勇，唐聪(2326)

AZ41M 镁合金动态再结晶临界条件········································蔡志伟，陈拂晓，郭俊卿(2335)

焊后热处理对Al-Mg-Si-Cu合金激光焊接接头微观结构和力学性能的影响··························朱东晖，陈江华，刘春辉，孟立春，郑雄，赖玉香，陶冠辉, 顾媛(2342)

镁合金正挤压-扭转变形的数值模拟与实验研究················卢立伟，赵俊，陈胜泉，刘龙飞，曾文兵(2350)

过共晶铝硅合金的高温力学性能及显微组织演变·······刘芳，于福晓，张祎玲，赵大志，许茜，左良(2358)

2197 铝锂合金形变热处理中 T1 相的析出行为································毛柏平，闫晓东，沈健(2366)

内高压成形制备 6063 铝合金异形管件的壁厚分布及尺寸精度·········蔡洋，刘强，王小松，苑世剑(2372)

胶层辅助激光焊双相钢/铝合金接头显微组织与力学性能·······周惦武，李宁宁，刘元利，徐少华，刘金水(2381)

铝/黄铜异种金属TIG熔钎焊接头显微组织与力学性能·············································周利，李志勇，赵洪运，谢宇，黄永宪，冯吉才(2389)

高速线材轧制Ti-6Al-4V合金小规格棒材的热处理工艺···········································丁辉，曹占元，史亚鸣，张玉勤，蒋业华，周荣(2396)

镍基高温合金 K4169 中夹杂物的特征及形成机理···············唐中杰，郭铁明，寇生中，付迎，金硕(2403)

涂层与块体致密度差值对铁基非晶合金耐蚀性的影响·························陈庆军，蒋薇，高霁雯(2414)

超疏水钛合金表面的制备及其摩擦学性能··························连峰，任洪梅，管善堃，张会臣(2421)

搅拌头形状对回填式搅拌摩擦点焊过程中材料流动行为的影响···········································岳玉梅，李政玮，姬书得，柴鹏，马轶男，王月(2428)

成型压力对冷等静压-烧结法制备 ITO 靶材中孔隙缺陷的影响·········刘志宏，谌伟，李玉虎，刘智勇(2435)

放电等离子烧结Cu-W-TiC复合材料的制备及其热变形特性······殷婷，田保红，张毅，刘勇，宋克兴(2445)

热镀锌铝镁镀层的切边保护性能和耐腐蚀机理·······························袁训华，林源，张启富(2453)

碳材料掺杂对镁基氢化物释氢性能的影响及其微观机理···············张健, 朱璞, 毛聪, 周惦武(2464)

掺氮对WO3薄膜电致变色调制性能的影响·········王伟，李合琴，陶磊，乔恺，周矗，张静，唐琼，黄依琴，左敏，李世伟(2471)

铜铝液相扩散结合的动力学分析····································张建宇，贲利华，初娣，吴春京(2478)

液相还原法制备微米级球形银粉及其分散机理························郭学益，邓多，李宇，田庆华(2484)

Zn-Cu-Al层状水滑石基复合氧化物的合成及光催化性能·········阎建辉，张丽，严彬彬，张秀秀，戴超华(2492)

SrBi4Ti4O15的铁电相变和铁电性··················································肖小红，李世春(2501)

丝粉同步送进激光沉积制备铝基复合材料的显微组织··················李福泉，张阳，陈彦宾，高振增(2510)

Si3N4基微纳米复合陶瓷刀具的高速切削性能与磨损机理······················吕志杰，杨广安，程凯强(2517)

Ni-Co-Mn合金的电镀工艺优化及与金刚石复合镀的摩擦磨损性能·············································奚小波，缪宏，金亦富，郑再象，程吉林，张瑞宏(2523)

胎体弱化颗粒材质对 WC 基孕镶金刚石钻头胎体磨损性能的影响···············郭庆清，王佳亮，张绍和(2531)

山西灵丘县梨园金矿流体包裹体特征及成矿作用······················鞠培姣，赖健清，杨洪基，王乐进，宋吉杰，李龙义，徐兴保，董文国，杨冰(2537)

Tween-80 对低品位碳酸锰矿的浮选增效作用···········邹义坤，陈婷，周凤，严春杰，杨祥，葛文(2551)

高通量测序技术分析不同温度下赞比亚低品位铜矿生物浸出过程中的微生物多样性····························郝晓东，曾伟民，彭堂见，胡琪，梁伊丽，尹华群，邱冠周，刘学端(2558)

不同破碎方式下磨矿技术效率·······························刘磊曹进成，吕良，郭珍旭，岳铁兵(2565)

一元散体颗粒物料在回转窑截面上的运动与混合·············陈辉，刘义伦，赵先琼，肖友刚，刘颖(2575)

温度对油酸钠在一水硬铝石表面的吸附量的影响····························冯其明，肖亚雄，卢毅屏(2582)

硫酸介质中锂云母分解反应动力学···························赵寻，杨静，马鸿文，刘梅堂，林斐(2588)

锌浸渣硫酸铵焙烧-选择性浸出回收锌······················彭兵，李燕春，柴立元，刘恢，闵小波，胡明，袁莹珍，雷杰，彭宁(2596)

木屑季铵螯合吸附剂的制备及其吸附铀矿酸法废水中U(VI)···································邓文静，周书葵，刘迎九，曾光明，江海浩，康丽，方良(2604)

第10期

Al-7Si-0.36Mg 合金定向凝固一次枝晶臂间距实验和模拟···················陈瑞，许庆彦，柳百成(2613)

稀土元素La对Mg-6Al-5Pb镁合金组织和腐蚀电化学行为的影响···················································冯艳，刘莉，殷立勇，王日初，李晓庚(2623)

微量元素含量对 Al-Zn-Mg 合金组织与性能的影响··········付高，邓运来，王亚风，戴青松，张新明(2632)

动态塑性变形下 AZ31 镁合金的孪生特征·································娄超，张喜燕，任毅(2642)

Sm 对 AZ91D 合金显微组织与力学性能的影响···················黄正华，刘汪涵博，戚文军，徐静(2649)

Al-Zn-Mg-Sc-Zr合金搅拌摩擦焊接接头的显微组织、力学性能及局部腐蚀性能···················································叶锐，杨继东，彭小燕，徐国富，尹志民(2656)

镁合金壳体内部缺陷的精确超声定量方法·················杨岳，戴万林，李雄兵，倪培君，乔日东(2666)

Al-Zn-Mg-Zr合金铸锭的均匀化·········································彭勇宜，樊鹏飞，潘清林(2672)

激光冲击强化对AZ31和AZ80-T6镁合金显微组织及力学性能的影响···················································张青来，邵伟，张冰昕，吴铁丹，王荣(2680)

双级时效对 7085 铝合金组织和性能的影响·········陈送义，陈康华，董朋轩, 叶升平，黄兰萍，阳代军(2688)

新型镍基单晶高温合金的显微组织与力学性能·············赵运兴，王薪，刘军，黄岚，江亮(2695)

粉末冶金高温合金FGH96的热加工图及热压缩变形过程的开裂行为···················································杨川，刘小涛，司家勇，刘锋，江亮(2707)

微细Fe2O3粉在Fe-2%Ni-1%Cu-0.6%C粉末冶金材料中的助烧结特性···················································滕浩，李佑福，曾海卒，李志友，周科朝(2720)

δ相时效态 GH4169 合金的热加工行为···········································陈前，王岩(2727)

双辊薄带铸轧中心线偏析机理与实验研究·················杜凤山，吕征，黄华贵，许志强，安仲健(2738)

热等静压制备 CF/Al复合材料的微观结构及性能···喻思，郎利辉，姚松，王刚，黄西娜，续秋玉(2745)

LiMg0.03(Ni0.77Co0.1Mn0.1)O2·B2O3球形高镍材料的制备与性能···············李卫，田文怀，其鲁(2752)

稀土元素La对Mg-Hg-Ga阳极材料组织与腐蚀电化学性能的影响··························································邓敏，王日初，冯艳，王乃光(2760)

介孔碳化钨纳米片的制备与电催化性能············杨威，孙海标，喻洋，佟明兴，谢伟淼，李国华(2770)

掺镧锆钛酸铅陶瓷电致畴变过程中的相变································杨凤娟，程璇，张颖(2777)

稀土Y对Mg-2Nd-0.5Zn-0.4Zr镁合金生物腐蚀性能的影响···················································程丹丹，文九巴，贺俊光，姚怀，梁明岗(2783)

纳米晶块体 Fe-60Ni-15Cr合金的高温氧化行为····························曹中秋，孙玥，贾中秋(2790)

合金基因、全息网络相图和全息合金定位设计与研发系统···················································谢佑卿，李小波，刘心笔，彭红建，聂耀庄(2798)

Al6061 板在不同应变路径下粗糙度演变的有限元模拟及实验········徐戊矫，龙江，章磊，陈晨(2844)

Fe-0.04%C合金焊缝熔池凝固过程中枝晶生长及溶质浓度分布模拟··························································张敏，李露露，徐蔼彦，李继红(2854)

液态金属铜 Cu 凝固过程中团簇结构的形成以及成核生长特性的模拟·······················易学华(2863)

铜陵老鸦岭铜矿床流体包裹体特征与成矿作用····························徐方颖，赖健清，王雄军(2871)

湘东锡田合江口锡钨多金属矿床地质特征及辉钼矿 Re-Os同位素年龄·······邓湘伟，刘继顺，戴雪灵(2883)

晶体结构对黄铜矿、黄铁矿生物浸出差异性影响···········································马骏，汪菊香，武彪，温建康，尚鹤，武名麟(2898)

焙烧温度对低硅含镁球团矿还原膨胀率的影响及机理······青格勒，吴铿，刘洪松，员晓，田筠清(2905)

低品位钼精矿石灰焙烧-酸浸提取钼···························陈许玲，王海波，甘敏，范晓慧，张麟，邓琼，王勇，曾金林(2913)

模拟酸雨条件下锡尾矿中重金属 As、Zn、Pb 的释放规律············董颖博，林海，刘泉利，王亮(2921)

复垦尾矿库重金属分布及生态风险评价··································邓红卫，贺威，周科平(2929)

嗜酸铁氧化富集物高效浸提废覆铜板分选残渣中的铜··········仉丽娟，刘晓文，康鑫，陈岩贽，周文根，史美玉，周文博，温勇，王炜，周洪波(2936)

As(Ⅲ)在酸性水溶液中与金属铁的反应行为···············刘志宏，潘庆琳，刘智勇，李玉虎，李启厚(2945)

第11期

镍基高温合金相关相图的高通量测定与热力学优化················朱礼龙，戚海英，江亮，金展鹏(2953)

含银硬质涂层高温摩擦学性能的研究进展············何鹏飞，王海斗，马国政，雍青松，陈书赢，徐滨士(2962)

5052 铝合金冲压成形过程中韧性断裂的仿真研究····································余海燕，王友(2975)

7050-T7451 铝合金铣削加工表面材料特性与本构关系模型的建立·······于鑫，孙杰，熊青春，韩雄(2982)

氨基酸对7B50铝合金在1 mol/L NaCl+0.1 mol/L HCl溶液中缓蚀性能的影响··············································杨标标，孙擎擎，孙睿吉，邵首祺，刘洋，陈康华(2990)

非等温回归再时效对 7055 铝合金中厚板的厚向组织及性能均匀性的影响·········冯迪，张新明，刘胜胆(3000)

铝合金薄板固有变形逆解析方法的研究与开发····················梁伟，邓德安，Murakara Hidekazu(3011)

预回复对固溶-T652处理超高强铝合金挤压材组织与性能的影响······································谈成，许晓静，蒋伟，孙良省，张香丽，范亚洲，赵建吉(3019)

电磁场作用下中铝合金熔体流动的混沌特征的仿真与分析····················刘政，张嘉艺，余昭福(3026)

Al-Cu-Mg-Ag新型耐热铝合金的抗腐蚀性能·····································齐浩，刘晓艳，梁顺星，张喜亮，崔好选，高飞，陈啟怀(3033)

Si含量对挤压铸造Al-5.0Cu-0.6Mn-0.7Fe合金显微组织和力学性能的影响··············································赵愈亮，孟凡生，张杨，张大童，杨超，张卫文(3040)

室温多向锻压 AZ31 镁合金的静态再结晶行为·················蒋莉萍，王军，肖振宇，张笃秀，杨续跃(3051)

基于修正球形双晶模型的金属 Al晶界能分子动力学计算·······张明亮，杨亮，魏承炀，李赛毅，张新明(3060)

钛/铝异种合金电弧熔钎焊接接头的组织与断裂行为··························马志鹏，于心泷，孟庆武(3067)

不同使用温度下 DD6 单晶高温合金的组织演变行为····················史振学，刘世忠，熊继春，李嘉荣(3077)

Si对FeMoCrNi高温耐磨合金的组织和抗氧化性能的影响·······································李洁翡，尹付成，刘永雄，欧阳雪枚，李智，赵满秀(3084)

准静态和动态加载 TA2 工业纯钛受迫剪切破坏演化··························付应乾，董新龙，虎宏智(3092)

氢在钛晶体中扩散行为的第一性原理··············································刘松，王寅岗(3100)

深孔法技术在铝合金构件应力场测试中的应用························廖凯，刘义鹏，常星宇，赵青(3107)

压电纤维复合物驱动应变性能的模拟和优化····王晓宇，从强，林秀娟，陈海燕，王浩威，周科朝，张斗(3113)

Sn-Ag-Cu 无铅球栅阵列焊点塑性表征································杨淼森，孙凤莲，孔祥霞，周云芳(3119)

活性炭负载纳米 Ag@AgCl材料的制备及其光催化性能·······刘文胜，成帆，马运柱，余强，王依锴(3126)

电沉积镍和轧制镍显微组织和力学性能的对比··············夏天东，张晓宇，徐仰涛，丁万武，赵文军(3133)

低电阻率多壁碳纳米管粉体的制备和表征·····················姚辉，蔡炜，赵永生，王利民，何卫(3141)

添加 LaB6的 CuW70 触头材料的电弧侵蚀行为··············陈娟，王献辉，成军，杨晓红，邹军涛(3147)

超重力强化结晶硅与熔析剂的高温分离··············陈杭，王志，池汝安，靖青秀，孙丽媛，杜冰(3155)

复合纤维含量对精铸硅溶胶型壳强度及透气性的影响·······芦刚，毛蒲，严青松，纪超众，饶文杰(3164)

湘东八团岩体的成因：地球化学、锆石U-Pb年代学以及Hf同位素的制约·············································郑明泓，邵拥军，隗含涛，熊伊曲，邹艳红，谭华杰(3171)

基于最小梯度支撑的 2.5D 井地电位法正则化聚焦反演·······················张志勇，周峰，李泽林(3182)

深井似膏体充填管道的输送特性····································张钦礼，刘奇，赵建文，刘贱刚(3190)

频率域线源 CSAET 二维反演数值计算····································曹创华，童孝忠，柳建新(3196)

锡阳极泥硫化焙烧分离锑·······························································卢红波(3202)

稀土电解槽流场的数值模拟·······················刘钊，李宗安，张小伟，庞思明，陈德宏，王志强(3209)

电动势法测量 Na2PbO2和 Na2ZnO2生成自由能·······················王志猛，谢宏伟，张懿，翟玉春(3216)

中非铜-钴氧化矿两段浸出过程·····································李淑梅，刘凯华，李辉，丛自范(3223)

Ida2--H2O 体系中氧化锌矿的循环浸出低品位·······················窦爱春，杨天足，刘云建，苏明如(3229)

新型功能化吸附剂G-PA-SBA-15对U(VI)的吸附机理··················彭国文，肖方竹，丁德馨，张志军，胡南，王晓亮，周归，黄红，杨锦然(3237)

第12期

金属材料超高周疲劳的试验方法及失效特征··························宋亚南，徐滨士，王海斗，邢志国(3245)

电子封装用金属基复合材料的研究进展······························曾婧，彭超群，王日初，王小锋(3255)

中断时效处理对 AA2024 铝合金力学性能和显微结构的影响····················尹美杰，陈江华，刘春辉(3271)

AA7075 铝合金应力腐蚀开裂过程中裂纹萌生和发展的电化学噪声·······李文婷，潘若生，赵苇杭，董泽华(3282)

半固态与铸态 7A04 铝合金腐蚀行为的对比····················朱艳丽，胡光忠，徐晓龙，潘训海，赵君文(3293)

时效前处理对新型Al-Cu-Li-X合金力学性能和显微组织的影响··············································张健，朱瑞华，李劲风，马云龙，刘德博，郑子樵(3300)

含钇AZ91镁合金在连续浸泡与干湿交替环境中的腐蚀行为··············································张明，贾瑞灵，张贵龙，郭锋，张伟，王福会(3309)

Mg-Al-Y合金中Al-Y金属间化合物的相稳定性、弹性和热力学性质的第一原理计算····························································陈红蕾，林立，毛萍莉，刘正(3319)

轴承用耐磨 Al-Sn-Cu 合金的显微组织与性能··························章升程，潘清林，李波，黄星(3327)

Ce 对往复挤压-低温正挤压 Mg-Zn-Ce 合金组织和力学性能的影响··············杨文朋，郭学锋，梁世何(3336)

Ti6Al4V 合金的高温短时蠕变本构关系与应力松弛行为·················杜舜尧，陈明和，谢兰生，张成祥(3344)

粉末冶金高温合金差热曲线的相变温度分析方法···············方姣，刘琛仄，刘军，黄岚，江亮(3352)

DP 工艺 Inconel 718 合金高温流变曲线修正及应变本构模型·············司家勇，廖晓航，黄再旺，江亮(3361)

纳米结构铁素体合金中氦捕获的第一性原理研究···············江勇，杨力通，金亚楠，周张健，吕铮(3370)

高应变率下材料本构模型参数的获得方法····························陈松林，赵吉宾，乔红超，杨灏(3381)

纯铜表面机械扭压处理工艺参数对其显微硬度的影响···········高波，王进，高松松，张志刚，张晓博(3389)

高压实密度 LiNi0.5Co0.2Mn0.3O2正极材料的制备及性能···········陈漾，唐朝辉，熊学，李碧平，刘志立(3397)

极片面密度和压实密度对 Li3V2(PO4)3/C 电化学性能的影响······唐艳，欧庆祝，刘恒，郭孝东，钟本和(3404)

Cu-金刚石复合镀层的制备··························马如龙，彭超群，王日初，王小锋，张纯，谭时雨(3414)

再生 WC-Co 复合粉及高耐磨性硬质合金涂层的制备···················刘雪梅，王海滨，宋晓艳，范金莲(3422)

铝合金黑色微弧氧化陶瓷膜的生长过程················鲁成，王青，梁军，李青彪，彭振军，刘百幸(3430)

超重力场反应熔铸合成 TiB2基复相陶瓷刀具材料·····························潘传增，张靖，张龙(3439)

硼-碳热还原法合成纳米 SiC-ZrB2复合陶瓷粉体················张兆甫，沙建军，王永昌，代吉祥，李建(3445)

压应力条件下不同晶界对石墨烯弯曲变形的影响···············喻娟，张效迅，吉建莎，黄丹，习武(3452)

安徽池州马头铜钼矿床锆石年龄与辉钼矿Re-Os同位素测定的地质意义·····················································赵超，谢兴楠，马春，柳建新，曹创华(3461)

宜章县长城岭燕山期两类岩浆岩的岩石学及构造背景·························张术根，刘贤红，朱书林(3473)

铅锌混合硫化精矿的低温熔盐还原固硫熔炼······································胡宇杰，唐朝波，陈永明，唐谟堂，杨声海，杨建广，何静(3488)

氧化铝赋存形式对低钙烧结熟料矿相转化的影响······················张迪，于海燕，潘晓林，翟玉春(3497)

离子强度、阴阳离子和腐殖酸对纳米零价铁去除溶液中U(Ⅵ)的影响······································李小燕，张明，刘义保，李寻，杨波，花榕，刘云海(3505)

废杂铜精炼过程中动态多元多相平衡热力学模型···············黄金堤，李静，童长仁，李明周，徐志峰(3513)

熔盐电解制备铝钕中间合金及其机理································廖春发，罗林生，王旭，汤浩(3523)

纳米 CeO2改性环氧树脂抗紫外老化·································王栋，解立峰，王翠华，王海洋(3530)

机械活化对闪锌矿物化性质及焙烧动力学的影响······································田磊，张廷安，吕国志，刘燕，周双，张伟光，张国权(3535)

2015年第25卷卷终