2024年1期
Journal of Wuhan University of Technology(Materials Science Edition)
Advanced materials
- One-pot Synthesis of Hierarchical Flower-like WS2 Microspheres as Anode Materials for Lithium-ion Batteries
- Controllable Synthesis of Au NRs and Its Flexible SERS Optical Fiber Probe with High Sensitivity
- Effciient Direct Decomposition of NO over La0.8A0.2NiO3(A=K, Ba, Y) Catalysts under Microwave Irradiation
- Appreciable Enhancement of Photocatalytic Performance for N-doped SrMoO4via the Vapor-thermal Method
- Infulence of Current Density on the Photocatalytic Activity of Nd:TiO2Coatings
- The Negative Thermal Expansion Property of NdMnO3 Based on Pores Effect and Phase Transition
- Efficient Removal of Phosphate from Aqueous Solutions Using Corundum- hollow-spheres Supported Caclined Hydrotalcite Porous Thin Films
- Effect and Mechanism of Rare Earth Hydrotalcite Inhibiting Coal Spontaneous Combustion
Cementitious materials
- Evaluation and Influencing Factors on Particle Agglomeration in RAP
- Carbonation of Dicalcium Silicate Enhanced by Ammonia Bicarbonate and Its Mechanism
- Preparation of α-High Strength Gypsum from Flue Gas Desulfurization Gypsum Pretreated by Hydrothermal-aging Method
- Alkali Tolerance of Concrete Internal Curing Agent Based on Sodium Carboxymethyl Starch
- Fatigue Resistance of RCA Modified Asphalt Based on Dielectric Properties
- High-Volume Mineral Admixtures Cement: The Effects of Particle Size Distribution
- Fractal Study on the Evolution ofMicro-Pores in Concrete Under Freeze-Thaw
- Preparation and Properties of Magnesium Oxysulfide Cement Based Foam Board Absorbing Material
- Hydration Behavior and Cementitious Properties of Calcium Carbonate-aluminate Minerals Composite
Metallic materials
- Improvement of Microstructure and Mechanical Properties of Rapid Cooling Friction Stir-welded A1050 Pure Aluminum
- Effects of Additives on the Microstructure and Tribology Performance of Ta-12W Alloy Micro-Arc Oxidation Coating
- Precipitates Generation Mechanism and Surface Quality Improvement for Aluminum Alloy 6061 in Diamond Cutting
- A Hybrid Optimization Approach ofSingle Point Incremental Sheet Forming of AISI 316L Stainless Steel Using Grey Relation Analysis Coupled with Principal Component Analysiss
- Carbon Fiber Breakage Mechanism in Aluminum (Al)/Carbon Fibers (CFs) Composite Sheet during Accumulative Roll Bonding (ARB) Process
- Effect of Heat Treatment on Microstructure and Mechanical Properties of Multiscale SiCpHybrid Reinforced 6061 Aluminum Matrix Composites
- Investigation of Microstructure, Microhardness and Thermal Properties of Ag-In Intermetallic Alloys Prepared by Vacuum Arc Meltings
- LPCS Ni-Zn-Al2 O3Intermediate Layer Enhanced SPS NiCr-Cr3C2Coating with Higher Corrosion and Wear Resistances
- Effects of Sinusoidal Vibration of Crystallization Roller on Composite Microstructure of Ti/Al Laminated Composites by Twin-Roll Casting
Organic materials
- Effect of Size Change on Mechanical Properties ofMonolayer Arsenene
- Surface Metallization of Glass Fiber (GF) /Polyetheretherketone (PEEK) Composite with Cu Coatings Deposited by Magnetron Sputtering and Electroplating
- Synthesis of Organic-Inorganic Hybrid Aluminum Hypophosphite Microspheres Flame Retardant and Its Flame Retardant Research on Thermoplastic Polyurethane