2022年3期
Journal of Wuhan University of Technology(Materials Science Edition)
Advanced materials
- Effect of Sintering Temperature and Hydrophobic Treatment on the Microstructure and Properties of Copper-Graphite Composites
- Simulations of Tapered Channel in Multilayer Graphene as Reverse Osmosis Membrane for Desalination
- Preparation and Characterization of Alumina-coated Hollow Quartz Fiber Reinforced Al2O3-SiO2 Aerogel Composite
- Protection Performance of Plasma Sprayed Al2O3-13 wt%TiO2 Coating Sealed with an Organic-inorganic Hybrid Agent
- Self-assembled Cyclodextrin Metal-Organic Frameworks on Graphene Oxide as Filter Membrane for Tracelevel Naringin Pre-enrichment before Analysis
- Structural Evolution of Graphene Oxide and Its Thermal Stability During High Temperature Sintering
- Fe Nanoparticles Synthesized by Pomegranate Leaves for Treatment of Malachite Green
- Metal-organic Frameworks Derived Cobalt Encapsulated in Nitrogen-doped Porous Carbon Nanosheets for Oxygen Reduction Reaction and Rechargeable Zinc-air Batteries
- In-situ Synthesis of Cr3C2 Nanosheets by Carbon Reduction Route from Cr2AlC
- Indenter Size Effect on Stress Relaxation Behaviors of Surface-modified Silicon:A Molecular Dynamics Study
- A Duplex Grain Structure of Dense (K,Na)NbO3 Ceramics Constructed by Using Microcrystalline as Seed
Cementitious materials
- Evaluation of Corrosion Inhibition of NO2- Intercalated LDHs on Steel Coated by Cement Paste
- Abrasion Resistance of Cement Paste with Granulated Blast Furnace Slag and Its Relations to Microhardness and Microstructure
- Influence of Nano-Materials on Mechanical and Permeation Characteristics of High Strength Concrete
- The Synthetic and Mechanical Properties of a Silica Matrix Cermet Composite
- Improvising the Self-Healing Capabilities of Concrete Using Different Pozzolanic Materials and Crystalline Admixtures
- Mechanism of C4AF Content and Heat-curing Process on the Abrasion Resistance of High Ferrite Cement
Metallic materials
- A Comparative Study on the Microstructures and Mechanical Properties of Two Kinds of Iron-Based Alloys by WAAM
- Effect of Solution Treatment on Recrystallization,Texture and Mechanical Properties of 7A65-T74 Aluminum Alloy Super-thick Hot Rolled Plate
- Fabrication and Characterization of TiAl Alloy by Fields Activated Sintering Technology (FAST)
- Mechanical Performance and Micro-structure of Pore Steel Slag Block Prepared by Accelerated Carbonation
- Influence of Formic Acid on Corrosion Behavior of Bronze under Thin Electrolyte Layer
- Deformation Stability of GH4033 Superalloy in the Hot Continuous Rolling Process Based on Dynamic Material Model and Finite Element Model
- Al-50 wt%Si Alloy by Spark Plasma Sintering (SPS) for Electronic Packaging Materials
- Fatigue Crack Growth Behavior of Eutectoid Steel Rail
- Effect of Hot-Plate Rolling on the Microstructure Evolution and Mechanical Properties of In-Situ Nano-TiCP/Al-Mg-Si Composites
- Preparation and Composition Distribution in Hollow Tubular TiB-Ti Composites during Centrifugal Spraying Process
Organic materials
- Silicone Modified Polyesters Vulcanizable at Room Temperature for Anti-corrosion Coatings on Tinplate
- Synergistic Flame Retardant Effect of Ammonium Polyphosphate and Aluminum Hydroxide on Polyurethane
- Temperature Effect on the Conformation Transition of Ultra-high Molecular Weight Polyethylene/Polypropylene Blends Undergoing Continuous Volume Extensional Flow:A Mesoscopic Simulation