Journal of Rock Mechanics and Geotechnical Engineering
- Poroelastic solution of a wellbore in a swelling rock with non-hydrostatic stress field
- Microwave response characteristics and influencing factors of ores based on dielectric properties of synthetic samples
- A novel approach to structural anisotropy classification for jointed rock masses using theoretical rock quality designation formulation adjusted to joint spacing
- Influence of blasting load directions on tunnel stability in fractured rock mass
- A new multiple-factor clustering method considering both box fractal dimension and orientation of joints
- Generic creep behavior and creep modeling of an aged surface support liner under tension
- Multi-exponential model to describe pressure-dependent P- and S-wave velocities and its use to estimate the crack aspect ratio
- Laboratory-scale investigation of response characteristics of liquid-filled rock joints with different joint inclinations under dynamic loading
- Characterization of 3D pore nanostructure and stress-dependent permeability of organic-rich shales in northern Guizhou Depression,China
- A grouting simulation method for quick-setting slurry in karst conduit:The sequential flow and solidification method
- Assessing the deformation response of double-track overlapped tunnels using numerical simulation and field monitoring
- Comparison of dominant frequency attenuation of blasting vibration for different charge structures
- Mechanical behaviours of sandstone containing intersecting fissures under uniaxial compression
- Experimental and numerical investigation on the mechanical responses and cracking mechanism of 3D confined single-flawed rocks under dynamic loading
- Attenuation characteristics of impact-induced seismic wave in deep tunnels: An in situ investigation based on pendulum impact test
- Face stability of shield tunnels considering a kinematically admissible velocity field of soil arching
- Effect of water chemistry on the hydro-mechanical behaviour of compacted mixtures of claystone and Na/Ca-bentonites for deep geological repositories
- Coupled thermo-hydro-mechanical modeling of frost heave and water migration during artificial freezing of soils for mineshaft sinking
- Seismic bearing capacity of a strip footing on rock media
- Clayey soil stabilization using alkali-activated volcanic ash and slag
- A comparative study of using two numerical strategies to simulate the biochemical processes in microbially induced calcite precipitation
- Multiclass stand-alone and ensemble machine learning algorithms utilised to classify soils based on their physico-chemical characteristics
- Visualization and quantification of soil laboratory impact compaction
- Effects of variations of voltage and pH value on the shear strength of soil and durability of different electrodes and piles during electrokinetic phenomenon
- Evaluation of hydro-mechano-chemical behaviour of bentonite-sand mixtures
- Effects of water saturation and loading rate on direct shear tests of andesite
- A fiber Bragg grating based earth and water pressures transducer with three-dimensional fused deposition modeling for soil mass
- Corrigendum to “Optimal placement of two soil soundings for rectangular footings” [J.Rock Mech.Geotech.Eng.13 (2021) 603-611]