Journal of Rock Mechanics and Geotechnical Engineering
- Validity of continuous-failure-state unloading triaxial tests as a means to estimate the residual strength of rocks
- Hydromechanical behaviors of andesite under different stress states during fluid injection
- Performance of identical rockbolts tested on four dynamic testing rigs employing the direct impact method
- Influence of grain size on strength of polymineralic crystalline rock:New insights from DEM grain-based modeling
- An empirical approach for predicting burden velocities in rock blasting
- Geomechanical model test for analysis of surrounding rock behaviours in composite strata
- Permeability evaluation for artificial single rock fracture according to geometric aperture variation using electrical resistivity
- Effect of rock mechanical properties on electromagnetic radiation mechanism of rock fracturing
- Development and application of an interface constitutive model for fully grouted rock-bolts and cable-bolts
- An explicit formulation of the macroscopic strength criterion for porous media with pressure and Lode angle dependent matrix under axisymmetric loading
- A waveform modification method for testing dynamic properties of rock under high temperature
- Analytical algorithm for longitudinal deformation profile of a deep tunnel
- Salinity effect on the compaction behaviour, matric suction, stiffness and microstructure of a silty soil
- Deformation and water/gas flow properties of claystone/bentonite mixtures
- Mechanical performances and microstructural characteristics of reactive MgO-carbonated silt subjected to freezing-thawing cycles
- An investigation into the effects of lime on compressive and shear strength characteristics of fiber-reinforced clays
- Experimental study on repeatedly loaded foundation soil strengthened by wraparound geosynthetic reinforcement technique
- Mesh generation and optimization from digital rock fractures based on neural style transfer
- A state-of-the-art review of automated extraction of rock mass discontinuity characteristics using three-dimensional surface models
- Discussion on“Analysis of Bingham fluid radial flow in smooth fractures”[J Rock Mech Geotech Eng 12 (2020) 1112-1118]
- Reply to Discussion on “Analysis of Bingham fluid radial flow in smooth fractures”