2023年8期
Journal of Magnesium and Alloys
- Research advances of magnesium and magnesium alloys worldwide in 2022
- Magnesium-based nanocomposites: A review from mechanical, creep and fatigue properties
- Magnesium alloys as extremely promising alternatives for temporary orthopedic implants – A review
- A multifunctional osteogenic system of ultrasonically spray deposited bone-active coatings on plasma-activated magnesium
- NaH doped TiO2 as a high-performance catalyst for Mg/MgH2 cycling stability and room temperature absorption
- Comparison between compression tested and simulated Mg-6.3Gd bone scaffolds produced by binder based additive manufacturing technique
- Microstructure, mechanical properties and fracture behaviors of large-scale sand-cast Mg-3Y-2Gd-1Nd-0.4Zr alloy
- Enhanced initial biodegradation resistance of the biomedical Mg-Cu alloy by surface nanomodification
- Anticorrosive and antibacterial smart integrated strategy for biomedical magnesium
- Elucidating the evolution of long-period stacking ordered phase and its effect on deformation behavior in the as-cast Mg-6Gd-1Zn-0.6Zr alloy
- Effect of long-period stacking ordered structure on very high cycle fatigue properties of Mg-Gd-Y-Zn-Zr alloys
- The mechanism for tuning the corrosion resistance and pore density of plasma electrolytic oxidation (PEO) coatings on Mg alloy with fluoride addition
- Effect of Cd on matrix structure ordering and aging precipitation evolution in a Mg-Gd-Cd solid-solution alloy
- In-depth analysis of the influence of bio-silica filler (Didymosphenia geminata frustules) on the properties of Mg matrix composites
- Gradient structure induced simultaneous enhancement of strength and ductility in AZ31 Mg alloy with twin-twin interactions
- The role of melt cooling rate on the interface between 18R and Mg matrix in Mg97Zn1Y2 alloys
- Flow softening and dynamic recrystallization behavior of a Mg-Gd-Y-Nd-Zr alloy under elevated temperature compressions
- Shielding AZ91D-1%Ca from corrosion through ultrasound melt treatment: A study for stent design
- Hydrogen inhibition effect of chitosan and sodium phosphate on ZK60 waste dust in a wet dust removal system: A feasible way to control hydrogen explosion
- Effect of ternary transition metal sulfide FeNi2S4 on hydrogen storage performance of MgH2
- A super wear-resistant coating for Mg alloys achieved by plasma electrolytic oxidation and discontinuous deposition
- Microstructural evolution of pre-twinned Mg alloy with annealing temperature and underlying boundary migration mechanism
- Corrosion resistance of Mg-Al-LDH steam coating on AZ80 Mg alloy:Effects of citric acid pretreatment and intermetallic compounds
- Rolling texture development in a dual-phase Mg-Li alloy: The role of temperature
- Characterizations on the instantaneously formed Ni-containing intermetallics in magnesium alloys