2020年4期
Journal of Magnesium and Alloys
- A review on current anode materials for rechargeable Mg batteries
- Debating the magnesium–selenium battery technology
- Review of Mg alloy corrosion rates
- Coating of bioactive glass on magnesium alloys to improve its degradation behavior:Interfacial aspects
- Effects of dynamic recrystallization and strain-induced dynamic precipitation on the corrosion behavior of partially recrystallized Mg–9Al–1Zn alloys
- Structure,mechanical characteristics,biodegradation,and in vitro cytotoxicity of magnesium alloy ZX11 processed by rotary swaging
- High temperature mechanical behaviour of Mg–6Zn–1Y alloy with 1wt.%calcium addition:Reinforcing effect due to I-(Mg3Zn6Y1)and Mg6Zn3Ca2 phases
- An investigation into ball burnishing process of magnesium alloy on CNC lathe using different environments
- Quasi-in-situ investigation into the microstructure and texture evolution of pure magnesium during friction stir welding
- Study of Mg–Al–Ca magnesium alloy ameliorated with designed Al8Mn4Gd phase
- Synergistic refining mechanism of Mg-3%Al alloy refining by carbon inoculation combining with Ca addition
- {102}twinning nucleation in magnesium assisted by alternative sweeping of partial dislocations via an intermediate precursor
- Enhanced microstructural stability and mechanical properties of the Ag-containing Mg–Gd–Y alloys
- Effect of heat treatment on LPSO morphology and mechanical properties of Mg–Zn–Y–Gd alloys
- Analysing the combined effect of crystallographic orientation and grain refinement on mechanical properties and corrosion behaviour of ECAPed ZE41 Mg alloy
- Deformation mechanism of fine grained Mg–7Gd–5Y–1.2Nd–0.5Zr alloy under high temperature and high strain rates
- Solid state recycling of Mg–Gd–Y–Zn–Zr alloy chips by spark plasma sintering
- Ground state parameters,electronic properties and elastic constants of CaMg3:DFT study
- Effect of long-period stacking ordered phase on hot tearing susceptibility of Mg–1Zn–xY alloys
- In-situ analysis of slip transfer and heterogeneous deformation in tension of Mg-5.4Gd-1.8Y-1.5Zn alloy
- Microstructural and textural investigation of an Mg–Dy alloy after hot plane strain compression
- Microstructure characterization and corrosion behavior of Mg–Y–Zn alloys with different long period stacking ordered structures
- Enhancing the strain hardening and ductility of Mg-Y alloy by introducing stacking faults
- Effect of circumferential strain rate on dynamic recrystallization and texture of Mg-13Gd-4Y-2Zn-0.5Zr alloy during rotary backward extrusion
- Thermodynamic descriptions of quaternary Mg–Al–Zn–Bi system supported by experiments and their application in descriptions of solidification behavior in Bi-additional AZ casting alloys
- On the rule of mixtures for bimetal composites without bonding
- Influence of thermomechanical processing on microstructure,mechanical and strain hardening properties of single-phase Mg-4Li-0.5Ca alloy for structural application
- A comparison study of Ce/La and Ca microalloying on the bio-corrosion behaviors of extruded Mg-Zn alloys
- Effect of REs(Y,Nd)addition on high temperature oxidation kinetics,oxide layer characteristic and activation energy of AZ80 alloy
- Deformation nanomechanics and dislocation quantification at the atomic scale in nanocrystalline magnesium
- Effect of extrusion ratio on the microstructure and texture evolution of AZ31 magnesium alloy by the staggered extrusion(SE)
- Corrosion behavior of electron beam processed AZ91 magnesium alloy
- Effect of phosphate-based sealing treatment on the corrosion performance of a PEO coated AZ91D mg alloy