Defence Technology
- Round robin using the depth of penetration test method on an armour grade alumina
- Sonochemically assisted synthesis of nano HMX
- Effect of particle gradation of aluminum on the explosion field pressure and temperature of RDX-based explosives in vacuum and air atmosphere
- FEM analysis and experimental investigation of force and chip formation on hot turning of Inconel 625
- Study on liquid-filled structure target with shaped charge vertical penetration
- Thermal decomposition of ammonium perchlorate catalyzed with CuO nanoparticles
- Investigating the dynamic mechanical behaviors of polyurea through experimentation and modeling
- Analysis of vibration signal responses on pre induced tunnel defects in friction stir welding using wavelet transform and empirical mode decomposition
- Low velocity impact studies of E-glass/epoxy composite laminates at different thicknesses and temperatures
- A novel non-separation opening scheme of front cover for rocket launch canister
- Fragmentation behavior of large-caliber PELE impacting RHA plate at low velocity
- Prediction and optimization of machining forces using oxley's predictive theory and RSM approach during machining of WHAs
- Advances in phase stabilization techniques of AN using KDN and other chemical compounds for preparing green oxidizers
- Magnetic,thermal stability and dynamic mechanical properties of beta isotactic polypropylene/natural rubber blends reinforced by NiZn ferrite nanoparticles
- Adaptive fault-tolerant control based on boundary estimation for space robot under joint actuator faults and uncertain parameters
- Modeling and simulation of bullet-barrel interaction process for the damaged gun barrel
- Meso-mechanical model of concrete under a penetration load