Defence Technology
- Overview of Al-based nanoenergetic ingredients for solid rocket propulsion
- Implications of fine water mist environment on the post-detonation processes of a PE4 explosive charge in a semi-confined blast chamber
- Systematic research on the performance of self-designed microwave plasma reactor for CVD high quality diamond
- cis-1,3,4,6-Tetranitrooctahydroimidazo-[4,5-d]imidazole(BCHMX)as a part of explosive mixtures
- Joining and machining of(ZrB2-SiC)and(Cf-SiC)based composites
- Structural evolution,optoelectrical and corrosion properties of electrodeposited WO3integration on Zn-TiO2electrolyte for defence super application
- Influence of spark plasma sintering on microstructure and corrosion behaviour of Ti-6Al-4V alloy reinforced with micron-sized Si3N4 powder
- Characterization of ceramic reinforced titanium matrix composites fabricated by spark plasma sintering for anti-ballistic applications
- Numerical evaluation of an autofrettaged thick-walled cylinder under dynamically applied axially non-uniform internal service pressure distribution
- The fragmentation of D-shaped casing filled with explosive under eccentric initiation
- Experimental study on thermal decomposition kinetics of natural ageing AP/HTPB base bleed composite propellant
- Challenges in blast protection research
- Blast response of continuous-density graded cellular material based on the 3D Voronoi model
- Studies of a combined way of flame stability in ramjet combustor
- Electrolytic deposition of super-smart composite coating of Zn-V2O5-NbO2on low carbon steel for defence application
- Numerical simulation of cook-off characteristics for AP/HTPB
- Strength criterion of composite solid propellants under dynamic loading
- The inhibitive study of egg shell powder on uns n08904 austenitic stainless steel corrosion in chloride solution
- Epidemiology of civilian blast injuries inflicted by terrorist bombings from 1970-2016
- Effect of particle size on the preparation and microwave absorption properties of FeSiAl magnetically soft alloy hollow microspheres
- Analysis and discussion on launching mechanism and tactical electromagnetic railgun technology
- Study on dynamic mechanical properties of high nitrogen steels
- Research on dynamic response characteristics of CFRP/Al HC SPs subjected to high-velocity impact
- Propagation of shock waves in dry and wet sandstone:Experimental observations,theoretical analysis and meso-scale modeling
- Study on the analysis method on ballistic performance of deterred propellant with large web size in large caliber artillery
- Dynamic responses of reinforced concrete beams under double-endinitiated close-in explosion
- Experimental investigation of p-section concrete beams under contact explosion and close-in explosion conditions
- Behavior of reinforced concrete beams and columns subjected to blast loading
- Numerical study of size effect in concrete penetration with LDPM
- Study on the influence of projectile on muzzle disturbance
- Effect of initiation manners on the scattering characteristics of semi-preformed fragment warhead
- Laterally pre-compressed SiC tiles against long rod impact
- Metallurgical characteristics of armour steel welded joints used for combat vehicle construction
- Ballistic model for the prediction of penetration depth and residual velocity in adobe:A new interpretation of the ballistic resistance of earthen masonry
- Safety analysis on truing process of solid propellant
- LTT switch unit for capacitive energy storages
- Conceptual design of 2 MJ capacitive energy storage
- Method of ballistic control and projectile rotation in a novel railgun
- A novel strategy of smart manipulation by micro-scale oscillatory networks of the reactionary zones for enhanced extreme thrust control of the next-generation solid propulsion systems
- GUIDE FOR AUTHORS