CHINESE JOURNAL OF AERONAUTICS
Electronics and Electrical Engineering and Control
- An internal power angle control strategy for highspeed sensorless brushless DC motors
- Impact of receiver inter-frequency bias residual uncertainty on dual-frequency GBAS integrity
- Target localization method of non-cooperative spacecraft on on-orbit service
- Topology tracking of dynamic UAV wireless networks
Fluid Mechanics and Flight Mechanics
- Assessment and improvement of k-ω-γ model for separation-induced transition prediction
- Regularities between kinematic and aerodynamic characteristics of flexible membrane wing
- Aerodynamic optimization of a high-lift system with adaptive dropped hinge flap
- A three-equation transition model with mechanical considerations
Material Engineering and Mechanical Manufacturing
- TFM imaging of aeroengine casing ring forgings with curved surfaces using acoustic field threshold segmentation and vector coherence factor
- Leakage and wear characteristics of carbon seals for aero-engines
- A novel low pressure-difference fluctuation electro-hydraulic large flowrate control valve for fuel flowrate control of aeroengine afterburner system
- Soft landing stability analysis of a Mars lander under uncertain terrain
Solid Mechanics and Vehicle Conceptual Design
- Research on disruptive design pre-identification in the preliminary design phase of aero engine flow pass multidisciplinary optimization
- Pressure performance for a thin-walled ring and turbulent-jet orifice modeled elastic squeeze film damper
- Study on dynamic stiffness of supporting structure and its influence on vibration of rotors
- Safety lifetime analysis method for multi-mode time-dependent structural system
- Parametric study on the flutter sensitivity of a wide-chord hollow fan blade
Reviews
- Research progress of space non-pyrotechnic low-shock connection and separation technology(SNLT): A review
- Rational design of self-powered sensors with polymer nanocomposites for human–machine interaction
- Minimum quantity lubrication machining of aeronautical materials using carbon group nanolubricant: From mechanisms to application