CHINESE JOURNAL OF AERONAUTICS
- Instability characteristics of a co-rotating wingtip vortex pair based on bi-global linear stability analysis
- Application of focused laser differential interferometer to hypersonic boundary-layer instability study
- Designing method of acceleration and deceleration control schedule for variable cycle engine
- Influence of welding parameters on microstructure and mechanical properties of electron beam welded Ti60 to GH3128 joint with a Cu interlayer
- Frictional behavior during cold ring compression process of aluminum alloy 5052
- Wing optimization of propeller aircraft based on actuator disc method
- Confinement characteristic of primary electrons with the variation of channel width in the discharge chamber of annular ion thruster
- BN/SiBCN light-leakage-proof coatings of silica optical fiber for long term sensors at high temperatures
- Laser joining of CFRTP to titanium alloy via laser surface texturing
- Ferrofluid moving thin films for active flow control
- Preliminary study on heat flux measurement data of TT-0 flight test
- An analysis and enhanced proposal of atmospheric boundary layer wind modelling techniques for automation of air traffic management
- Jet sweeping angle control by fluidic oscillators with master-slave designs
- Hot deformation behavior and microstructure evolution of the laser solid formed TC4 titanium alloy
- Electrochemical trepanning with an auxiliary electrode
- A method for automatic detection and characterization of plasma bubbles using GPS and BDS data
- Analysis and control optimization of positive pressure fluctuation in electromechanical oxygen regulator
- Numerical investigation on flow mechanism in a supersonic fluidic oscillator
- A novel architecture of electro-hydrostatic actuator with digital distribution
- Aerodynamic performance of owl-like airfoil undergoing bio-inspired flapping kinematics
- Energy-saving and accurate motion control of a hydraulic actuator with uncertain negative loads
- Structural design and optimization for vent holes of an industrial turbine sealing disk
- Experimental, analytical and numerical investigation on tensile behavior of twisted fiber yarns
- Effect of operational condition of rotational subsystem on attitude control for space solar power station
- Experimental and numerical study on pressure oscillation in a combustor with rotary valve
- Evaluation of conflict-resolution policies on controller taskload
- Integrated design of topology and material for composite morphing trailing edge based compliant mechanism
- Two new multi-phase reliability growth models from the perspective of time between failures and their applications
- Direct numerical simulation of impinging shock wave and turbulent boundary layer interaction over a wavy-wall
- Reflected shock/turbulent boundary layer interaction structure analysis based on large eddy simulation
- Thermal performance of a 3D printed lattice-structure heat sink packaging phase change material
- Multi-scale design and optimization for solid-lattice hybrid structures and their application to aerospace vehicle components
- Reflection of a moving shock wave over an oblique shock wave
- Diamond wheel grinding characteristics of 3D orthogonal quartz fiber reinforced silica ceramic matrix composite
- Aerodynamic performance of a low-Reynolds UAV with leading-edge protuberances inspired by humpback whale flippers
- Hybrid method based on flame volume concept for lean blowout limits prediction of aero engine combustors
- Nondestructive acquisition of the micro-mechanical properties of high-speed-dry milled micro-thin walled structures based on surface traits
- Influence of shock wave impinging region on supersonic film cooling
- Adaptive accurate tracking control of HFVs in the presence of dead-zone and hysteresis input nonlinearities
- High-adaption locomotion with stable robot body for planetary exploration robot carrying potential instruments on unstructured terrain
- Numerical investigation of full scale coaxial main rotor aerodynamics in hover and vertical descent
- Scaling effects on combustion modes in a single-side expansion kerosene-fueled scramjet combustor
- Identification of key factors affecting the failure of aviation piston engine turbochargers based on an improved correspondence analysis-polar anglebased classification
- Three-dimensional cooperative guidance strategy and guidance law for intercepting highly maneuvering target
- Scaling of interaction lengths for hypersonic shock wave/turbulent boundary layer interactions
- Core reinforcement design for improving flexural energy-absorption of corrugated sandwich composite structure
- Modelling ignition probability with pairwise mixing-reaction model for flame particle tracking
- Integrated method of guidance, control and morphing for hypersonic morphing vehicle in glide phase
- Reliability estimation of mechanical seals based on bivariate dependence analysis and considering model uncertainty
- A multi-stage regulation strategy of space manipulators with a free-swinging joint failure
- Deep learning enabled localization for UAV autolanding
- PDE solution to UAV/UGV trajectory planning problem by spatio-temporal estimation during wildfires
- A progressive approach to predict shot peening process parameters for forming integral panel of Al7050-T7451
- A low-diffusion robust flux splitting scheme towards wide-ranging Mach number flows
- Standing window of oblique detonation with pathological behaviour