2022年4期
刊物介绍
The Chinese Journal of Chemical Engineering (Bimonthly, started in 1982) is the official journal of the Chemical Industry and Engineering Society of China and published by the Chemical Industry Press. The aim of the journal is to develop the international exchange of scientific and technical information in the field of chemical engineering. It publishes original research papers that cover the major advancements and achievements in chemical engineering in China as well as some articles from overseas contributors. The topics of journal include chemical engineering, chemical technology, biochemical engineering, energy and environmental engineering and other relevant fields. Papers are published on the basis of their relevance to theoretical research, practical application or potential uses in the industry as Research Papers, Research Notes, Chemical Engineering Data and Reviews. Prominent domestic and overseas chemical experts and scholars have been invited to form an International Advisory Board and the Editorial Committee. It enjoys recognition among Chinese academia and industry as a reliable source of information of what is going on in chemical engineering research, both domestic and abroad.
Chinese Journal of Chemical Engineering
- Photoacoustic detection of follicular thyroid carcinoma using targeted Nano-Au-Tripods
- Effect of inlet area on the performance of a two-stage cyclone separator
- Recovery of lithium using H4Mn3.5Ti1.5O12/reduced graphene oxide/polyacrylamide composite hydrogel from brine by Ads-ESIX process
- Three-scale integrated optimization model of furnace simulation,cyclic scheduling,and supply chain of ethylene plants
- Insights into biobased epoxidized fatty acid isobutyl esters from biodiesel:Preparation and application as plasticizer
- Influences of fluid physical properties,solid particles,and operating conditions on the hydrodynamics in slurry reactors
- Numerical simulation of local and global mixing/segregation characteristics in a gas–solid fluidized bed
- Nb2O5 promoted Pd/AC catalyst for selective phenol hydrogenation to cyclohexanone
- Inhibition of hematite on acid mine drainage caused by chalcopyrite biodissolution
- The high catalytic activity and strong stability of 3%Fe/AC catalysts for catalytic wet peroxide oxidation of m-cresol:The role of surface functional groups and FeOx particles
- Performance of a synthetic resin for lithium adsorption in waste liquid of extracting aluminum from fly-ash
- Experimental and theoretical study on N-hydroxyphthalimide and its derivatives catalyzed aerobic oxidation of cyclohexylbenzene
- Measuring absolute adsorption in porous rocks using oscillatory motions of a spring-mass system
- Enhanced electrochemical performance of garnet-based solid-state lithium metal battery with modified anodic and cathodic interfaces
- Insights into high-efficient removal of tetracycline by a codoped mesoporous carbon adsorbent
- Ternary Ni2P/Bi2MoO6/g-C3N4 composite with Z-scheme electrontransfer path for enhanced removal broad-spectrum antibiotics by the synergistic effect of adsorption and photocatalysis
- Facile synthesis of metal-organic frameworks embedded in interconnected macroporous polymer as a dual acid-base bifunctional catalyst for efficient conversion of cellulose to 5-hydroxymethylfurfural
- Component analysis and risk assessment of biogas slurry from biogas plants
- Dynamic optimization of 1,3-propanediol fermentation process:A switched dynamical system approach
- Photocatalytic oxidative of Keggin-type polyoxometalate ionic liquid for enhanced extractive desulfurization in binary deep eutectic solvents
- Study of intermolecular interactions in binary mixtures of methyl acrylate with benzene and methyl substituted benzenes at different temperatures:An experimental and theoretical approach
- Enhanced straw fermentation process based on microbial electrolysis cell coupled anaerobic digestion
- Patterned catalyst layer boosts the performance of proton exchange membrane fuel cells by optimizing water management
- Lead removal from aqueous medium using fruit peels and polyaniline composites in aqueous and non-aqueous solvents in the presence of polyethylene glycol
- Separation of salidroside from the fermentation broth of engineered Escherichia coli using macroporous adsorbent resins
- Characterization and structure analysis of the heterosolvate of erythromycin thiocyanate
- Investigation on the effects of fluid intensification based preconditioning process on the decarburization enhancement of fly ash
- Evolution of copper nanowires through coalescing of copper nanoparticles induced by aliphatic amines and their electrical conductivities in polyester films
- Study on environmentally friendly refrigerant R13I1/R152a as an alternative for R134a in automotive air conditioning system
- Modification of FCC slurry oil and deoiled asphalt for making high-grade paving asphalt
- Optimization of continuous electrocoagulation-adsorption combined process for the treatment of a textile effluent
- Fluidization dynamic characteristics of carbon nanotube particles in a tapered fluidized bed
- Transparent and anti-fogging AlPO4-5 films constructed by oblique oriented nano-flake crystals
- Effect of additives on nickel-phosphorus deposition obtained by electroless plating:Characterization and corrosion resistance in 3%(mass) sodium chloride medium
- Construction of a Brönsted-Lewis solid acid catalyst La-PW-SiO2/SWCNTs based on electron withdrawing effect of La(III) on π bond of SWCNTs for biodiesel synthesis from esterification of oleic acid and methanol
- Simultaneous utilization of electro-generated O2 and H2 for H2O2 production:An upgrade of the Pd-catalytic electro-Fenton process for pollutants degradation
- Preparation and properties of Ni-W-P-TiO2 nanocomposite coatings developed by a sol-enhanced electroplating method
- Boosting low-temperature selective catalytic reduction of NOx with NH3 of V2O5/TiO2 catalyst via B-doping
- Solubility and metastable zone width measurement of 2,4-diaminobenzenesulfonic acid in (H2SO4+H2O) system
- A facile preparation of hausmannite as a high-performance catalyst for toluene combustion
- Simultaneous synthesis of heat-integrated water networks by a nonlinear program:Considering the wastewater regeneration reuse
- Computational fluid dynamics simulation of gas dispersion in complex facilities using Kit Fox field experiments:Validation and statistical evaluation
- Numerical investigation of grooves effects on the thermal performance of helically grooved shell and coil tube heat exchanger
- Gas cyclone-liquid jet absorption separator used for treatment of tail gas containing HCl in titanium dioxide industry
- Surfactant-assisted removal of 2,4-dichlorophenol from soil by zerovalent Fe/Cu activated persulfate
- Visualization on electrified micro-jet instability from Taylor cone in electrohydrodynamic atomization
- Theoretical and experimental assessment of a novel method to establish the complete measurement range of the calorimeter and its limit ofdetection and quantification
- Measurement and correlation of the solubility of sodium acetate in eight pure and binary solvents
- Computational study of bubble coalescence/break-up behaviors and bubble size distribution in a 3-D pressurized bubbling gas-solid fluidized bed of Geldart A particles
- Non-equilibrium thermodynamic analysis of coupled heat and moisture transfer across a membrane
- Modeling and simulation of material distribution in the sequential co-injection molding process
- A new approach for correlating of H2S solubility in [emim][Lac],[bmim][ac] and [emim][pro] ionic liquids using two-parts combined models
- A coupled CFD simulation approach for investigating the pyrolysis process in industrial naphtha thermal cracking furnaces