2018年5期
刊物介绍
The Chinese Journal of Chemical Engineering (Bimonthly, started in 1982) is the official journal of the Chemical Industry and Engineering Society of China and published by the Chemical Industry Press. The aim of the journal is to develop the international exchange of scientific and technical information in the field of chemical engineering. It publishes original research papers that cover the major advancements and achievements in chemical engineering in China as well as some articles from overseas contributors. The topics of journal include chemical engineering, chemical technology, biochemical engineering, energy and environmental engineering and other relevant fields. Papers are published on the basis of their relevance to theoretical research, practical application or potential uses in the industry as Research Papers, Research Notes, Chemical Engineering Data and Reviews. Prominent domestic and overseas chemical experts and scholars have been invited to form an International Advisory Board and the Editorial Committee. It enjoys recognition among Chinese academia and industry as a reliable source of information of what is going on in chemical engineering research, both domestic and abroad.
Chinese Journal of Chemical Engineering
Article
- CFD simulations of quenching process for partial oxidation of methane:Comparison of jet-in-cross- flow and impinging flow configurations☆
- Quantifying growth and breakage of agglomerates in fluid-particle flow using discrete particle method☆
- Coupling simulation of fluid structure interaction in the stirred vessel with a pitched blade turbine☆
- An integrated model for predicting the flame propagation in crimped ribbon flame arresters☆
- Assessment of k-ε models using tetrahedral grids to describe the turbulent flow field of a PBT impeller and validation through the PIV technique
- Super-hydrophobic and super-lipophilic functionalized graphene oxide/polyurethane sponge applied for oil/water separation☆
- Solubility of red palm oil in supercritical carbon dioxide:Measurement and modelling
- Modelling of heat transfer for progressive freeze concentration process by spiral finned crystallizer
- Osmotic concentration of succinic acid by forward osmosis:Influence of feed solution pH and evaluation of seawater as draw solution
- Effect of the chelating agents on bio-sorption of hexavalent chromium using Agave sisalana fibers
- Effect of thermodynamic parameters on prediction of phase behavior and process design of extractive distillation☆
- Synthesis of activated carbon from spent tea leaves for aspirin removal
- Water-stable ZIF-300/Ultrason®mixed-matrix membranes for selective CO2 capture from humid post combustion flue gas
- Experimental and simulation study of nylon 6 solid-liquid extraction process☆
- High-performance phosphate supported on HZSM-5 catalyst for dehydration of glycerol to acrolein☆
- Kinetic contribution of CO2/O2 additive in methane conversion activated by non-equilibrium plasmas☆
- Effect of copper precursors on the catalytic performance of Cu-ZSM-5 catalysts in N2O decomposition☆
- Influence of dehydrating agents on the oxidative carbonylation of methanol for dimethyl carbonate synthesis over a Cu/Y-zeolite catalyst☆
- Catalyst-free and solvent-free oxidation of cycloalkanes(C5-C8)with molecular oxygen:Determination of autoxidation temperature and product distribution☆
- A sludge volume index(SVI)model based on the multivariate local quadratic polynomial regression method
- A risk-based methodology for the optimal placement of hazardous gas detectors☆
- Composition control and temperature inferential control of dividing wall column based on model predictive control and PI strategies☆
- Modeling and optimization of industrial Fischer-Tropsch synthesis with the slurry bubble column reactor and iron-based catalyst☆
- Effect of different additives on the phase separation behavior and thermodynamics of p-tert-alkylphenoxy poly(oxyethylene)ether in absence and presence of drug
- Temperature-dependent aggregation of bio-surfactants in aqueous solutions of galactose and lactose:Volumetric and viscometric approach
- The occurrence,fate,and distribution of natural and synthetic hormones in different types of wastewater treatment plants in Iran
- Adaptation of intestine-based microbial functions to bioethanol production
- Integration of high-solid digestion and gasification to dispose horticultural waste and chicken manure☆
- Enhanced electrokinetic remediation of cadmium-contaminated natural clay using organophosphonates in comparison with EDTA☆
- Thermodynamic behaviors of Cu in interaction with chlorine,sulfur,phosphorus and minerals during sewage sludge co-incineration☆
- Effect of industrial microwave irradiation on the physicochemical properties and pyrolysis characteristics of lignite☆
- An innovative trigeneration system using biogas as renewable energy
- Cr(III)removal from simulated solution using hydrous magnesium oxide coated fly ash:Optimization by response surface methodology(RSM)☆
- Antioxidant activity of phytosynthesized biomatrix-loaded noble metallic nanoparticles
- A simple strategy to synthesize and characterization of zirconium modified PCs/γ-Al2O3☆
- Thermal conductivity of PVDF/PANI-nanofiber composite membrane aligned in an electric field☆
- Morphological,mechanical and thermal properties of cyanate ester/benzoxazine resin composites reinforced by silane treated natural hemp fibers☆
- Controlling dispersion and morphology of MoS2 nanospheres by hydrothermal method using SiO2 as template☆